[PATCH v1 2/2] dt-bindings: mmc: mtk-sd: add 64-steps tuning related property

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Fri Nov 24 00:24:16 PST 2023


On 24/11/2023 08:08, Axe Yang wrote:
> Add 'mediatek,tune-64-steps' option. This property will give MSDC
> a chance to achieve a more optimal calibration result, thus avoiding
> potential CRC issues.

Documentation goes before users.

> 
> Signed-off-by: Axe Yang <axe.yang at mediatek.com>
> ---
>  Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> index 3fffa467e4e1..c33301e2ea33 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> @@ -145,6 +145,14 @@ properties:
>      minimum: 0
>      maximum: 7
>  
> +  mediatek,tune-64-steps:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Some Soc need enable 64-steps tuning for better delay value to avoid CRC issue.

This scales poorly. Instead should be enum with number of tuning steps.

> +      If present, tune 64 steps to cover a complete clock cycle.
> +      If not present, tune only 32 steps. For eMMC and SD, this can also yield
> +      satisfactory calibration results in most cases.

Best regards,
Krzysztof




More information about the Linux-mediatek mailing list