[PATCH v3 3/3] regulator: mt6358: Add output voltage fine tuning to variable LDOs
Chen-Yu Tsai
wenst at chromium.org
Thu Nov 23 20:29:23 PST 2023
Please keep the whole CC list. Please don't top post.
On Thu, Nov 23, 2023 at 7:27 PM Bret Joseph <bretjoseph at gmail.com> wrote:
>
> /sys/kernel/debug/regmap/1000d000.pwrap/registers
> 1e00: 2808
> 1e02: 2808
> 1e04: 2000
> 1e06: 2000
> 1e08: 2808
According to the datasheet I have, x8xx is not a valid voltage setting.
It wasn't valid before my patch either.
This is vcama1.
> 1e0a: 2808
> 1e0c: 2000
> 1e0e: 2000
> 1e10: 0000 # I have deleted everything with 0000
> 1e20: 2808
> 1e22: 2808
> 1e24: 2000
> 1e26: 2000
> 1e28: 2808
x8xx is not valid here either. This is vcn33.
> 1e2a: 2808
> 1e2c: 2000
x0xx is not valid here either. This is vsim1.
> 1e2e: 2000
x0xx for register 0x1e30 is not valid. This is vsim2.
x0xx for register 0x1e38 is not valid. This is vemc.
x0xx for register 0x1e3c is not valid. This is vldo28.
x0xx for register 0x1e48 is not valid. This is vmch.
x0xx for register 0x1e4c is not valid. This is vmc.
> 1e80: 2808
> 1e82: 2808
> 1e84: 2000
> 1e86: 2000
> 1e88: 2808
> 1e8a: 2808
> 1e8c: 2000
> 1e8e: 2000
x0xx for register 0x1e98 is not valid. This is vefuse.
> 1ea0: 2808
> 1ea2: 2808
> 1ea4: 2000
> 1ea6: 2000
> 1ea8: 2808
> 1eaa: 2808
> 1eac: 2000
> 1eae: 2000
x0xx for register 0x1eae is not valid. This is vcamd.
So basically all the failures you see are due to (as far as the datasheet
says) invalid values. The driver prior to my patch would error out as well.
Either the register readback is faulty on your platform, or your bootloader
has configured the system into a weird state.
ChenYu
> /sys/kernel/debug/regulator/regulator_summary
> regulator use open bypass opmode voltage
> current min max
> ---------------------------------------------------------------------------------------
> regulator-dummy 3 35 0 unknown 0mV 0mA 0mV 0mV
> vdram1 0 0 0 normal 500mV 0mA
> 500mV 2087mV
> vcore 0 0 0 normal 500mV 0mA
> 500mV 1293mV
> vpa 0 0 0 normal 500mV
> 0mA 500mV 3650mV
> vproc11 0 0 0 normal 500mV 0mA
> 500mV 1293mV
> vproc12 0 0 0 normal 500mV 0mA
> 500mV 1293mV
> vgpu 0 0 0 normal 500mV 0mA
> 500mV 1293mV
> vs2 0 0 0 normal 500mV
> 0mA 500mV 2087mV
> vmodem 0 0 0 normal 500mV 0mA
> 500mV 1293mV
> vs1 2 5 0 normal 1000mV
> 0mA 1000mV 2587mV
> vio18 1 0 0 unknown 1800mV 0mA
> 1800mV 1800mV
> vcamio 0 0 0 unknown 1800mV 0mA
> 1800mV 1800mV
> vcn18 0 0 0 unknown 1800mV 0mA
> 1800mV 1800mV
> vefuse 0 0 0 unknown 1700mV 0mA
> 1700mV 1900mV
> vrf18 0 0 0 unknown 1800mV
> 0mA 1800mV 1800mV
> vdram2 0 0 0 unknown 600mV 0mA
> 600mV 1800mV
> vsim1 0 0 0 unknown 1700mV 0mA
> 1700mV 3100mV
> vibr 0 0 0 unknown 1200mV
> 0mA 1200mV 3300mV
> vrf12 0 0 0 unknown 1200mV
> 0mA 1200mV 1200mV
> vusb 0 0 0 unknown 3000mV
> 0mA 3000mV 3100mV
> vcamd 0 0 0 unknown 900mV 0mA
> 900mV 1800mV
> vfe28 0 0 0 unknown 2800mV
> 0mA 2800mV 2800mV
> vsram_proc11 0 0 0 unknown 500mV 0mA 500mV 1293mV
> vcn28 0 0 0 unknown 2800mV 0mA
> 2800mV 2800mV
> vsram_others 0 0 0 unknown 500mV 0mA
> 500mV 1293mV
> vsram_gpu 0 0 0 unknown 500mV 0mA
> 500mV 1293mV
> vxo22 0 0 0 unknown 2200mV 0mA
> 2200mV 2200mV
> vaux18 0 0 0 unknown 1800mV 0mA
> 1800mV 1800mV
> vmch 0 0 0 unknown 2900mV 0mA
> 2900mV 3300mV
> vbif28 0 0 0 unknown 2800mV
> 0mA 2800mV 2800mV
> vsram_proc12 0 0 0 unknown 550mV 0mA 500mV 1293mV
> vcama1 0 0 0 unknown 1800mV 0mA
> 1800mV 3000mV
> vemc 0 0 0 unknown 2900mV 0mA
> 2900mV 3300mV
> vio28 1 0 0 unknown 2800mV
> 0mA 2800mV 2800mV
> va12 0 0 0 unknown 1200mV
> 0mA 1200mV 1200mV
> VCN33 0 0 0 unknown 3300mV 0mA
> 0mV 0mV
> vcama2 0 0 0 unknown 1800mV 0mA
> 1800mV 3000mV
> vmc 0 0 0 unknown 1800mV
> 0mA 1800mV 3300mV
> vldo28 0 0 0 unknown 2800mV 0mA
> 2800mV 3000mV
> vaud28 0 0 0 unknown 2800mV 0mA
> 2800mV 2800mV
> vsim2 0 0 0 unknown 1700mV 0mA
> 1700mV 3100mV
>
> I have also seen errors when consumers use regulators which I think
> could be related to setting values on regulators
> Here is an example using mtk-ccifreq driver
> [ 0.668869] mtk-ccifreq cci: no pinctrl handle
> [ 0.669128] device: 'regulator:regulator.5--platform:cci': device_add
> [ 0.669278] devices_kset: Moving cci to end of list
> [ 0.669311] PM: Moving platform:cci to end of list
> [ 0.669340] mtk-ccifreq cci: Linked as a consumer to regulator.5
> [ 0.669713] of: _opp_add_static_v2: turbo:0 rate:500000000 uv:600000
> uvmin:600000 uvmax:600000 latency:0 level:0
> [ 0.669969] of: _opp_add_static_v2: turbo:0 rate:560000000 uv:675000
> uvmin:675000 uvmax:675000 latency:0 level:0
> [ 0.670245] of: _opp_add_static_v2: turbo:0 rate:612000000 uv:693750
> uvmin:693750 uvmax:693750 latency:0 level:0
> [ 0.670512] of: _opp_add_static_v2: turbo:0 rate:682000000 uv:718750
> uvmin:718750 uvmax:718750 latency:0 level:0
> [ 0.670763] of: _opp_add_static_v2: turbo:0 rate:752000000 uv:743750
> uvmin:743750 uvmax:743750 latency:0 level:0
> [ 0.671031] of: _opp_add_static_v2: turbo:0 rate:822000000 uv:768750
> uvmin:768750 uvmax:768750 latency:0 level:0
> [ 0.671598] of: _opp_add_static_v2: turbo:0 rate:875000000 uv:781250
> uvmin:781250 uvmax:781250 latency:0 level:0
> [ 0.671921] of: _opp_add_static_v2: turbo:0 rate:927000000 uv:800000
> uvmin:800000 uvmax:800000 latency:0 level:0
> [ 0.672178] of: _opp_add_static_v2: turbo:0 rate:980000000 uv:818750
> uvmin:818750 uvmax:818750 latency:0 level:0
> [ 0.672434] of: _opp_add_static_v2: turbo:0 rate:1050000000 uv:843750
> uvmin:843750 uvmax:843750 latency:0 level:0
> [ 0.672681] of: _opp_add_static_v2: turbo:0 rate:1120000000 uv:862500
> uvmin:862500 uvmax:862500 latency:0 level:0
> [ 0.672945] of: _opp_add_static_v2: turbo:0 rate:1155000000 uv:887500
> uvmin:887500 uvmax:887500 latency:0 level:0
> [ 0.673200] of: _opp_add_static_v2: turbo:0 rate:1190000000 uv:906250
> uvmin:906250 uvmax:906250 latency:0 level:0
> [ 0.673465] of: _opp_add_static_v2: turbo:0 rate:1260000000 uv:950000
> uvmin:950000 uvmax:950000 latency:0 level:0
> [ 0.673720] of: _opp_add_static_v2: turbo:0 rate:1330000000 uv:993750
> uvmin:993750 uvmax:993750 latency:0 level:0
> [ 0.673988] of: _opp_add_static_v2: turbo:0 rate:1400000000 uv:1031250
> uvmin:1031250 uvmax:1031250 latency:0 level:0
> [ 0.674327] device: 'cci': device_add
> [ 0.674499] PM: Adding info for No Bus:cci
> [ 0.674643] mtk-ccifreq cci: error -EPROBE_DEFER: devfreq_add_device:
> Unable to start governor for the device
> [ 0.675571] device: 'cci': device_unregister
> [ 0.675730] PM: Removing info for No Bus:cci
> [ 0.675862] mtk-ccifreq cci: failed to add devfreq device: -517
> [ 0.680084] mtk-ccifreq cci: Driver mtk-ccifreq requests probe deferral
> [ 0.680148] ------------[ cut here ]------------
> [ 0.680163] WARNING: CPU: 6 PID: 56 at _regulator_put+0x340/0x354
> [ 0.680190] Modules linked in:
> [ 0.680208] CPU: 6 PID: 56 Comm: kworker/u16:1 Tainted: G W
> 6.7.0-rc1-next-20231115-g2b600507077d-dirty #34
> [ 0.680232] Hardware name: MT6769H (DT)
> [ 0.680246] Workqueue: events_unbound deferred_probe_work_func
> [ 0.680268] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 0.680285] pc : _regulator_put+0x340/0x354
> [ 0.680302] lr : regulator_put+0x58/0x8c
> [ 0.680317] sp : ffffffc080483950
> [ 0.680328] x29: ffffffc080483950 x28: ffffff80c0030000 x27: ffffffdd002037f0
> [ 0.680353] x26: ffffffdd01747650 x25: ffffff80c0f5d0c0 x24: ffffffdd00180d80
> [ 0.680376] x23: ffffffc080483a98 x22: ffffffdd01f46d50 x21: ffffff80c0f5d780
> [ 0.680400] x20: ffffffdd01ee2bc0 x19: ffffff80c0f5d780 x18: ffffff80c1f8c660
> [ 0.680423] x17: 000000040044ffff x16: 005000f4b5593519 x15: ffffffdd0221fdb0
> [ 0.680446] x14: 0000000000000891 x13: 0000000000000891 x12: 0000000000000001
> [ 0.680468] x11: 0000000000000891 x10: 000000000001cde2 x9 : 0000000000001464
> [ 0.680491] x8 : 000000008020001f x7 : ffffff80c249e600 x6 : 000000000000018d
> [ 0.680513] x5 : 00000000000091ec x4 : 00000000000091d3 x3 : ffffffdd01a5e070
> [ 0.680535] x2 : 0000000000000001 x1 : ffffffdd01ee2b60 x0 : 0000000000000002
> [ 0.680558] Call trace:
> [ 0.680568] _regulator_put+0x340/0x354
> [ 0.680583] regulator_put+0x58/0x8c
> [ 0.680597] devm_regulator_release+0x30/0x4c
> [ 0.680613] release_nodes+0x8c/0xdc
> [ 0.680629] devres_release_all+0xc0/0x164
> [ 0.680646] device_unbind_cleanup+0x34/0xe4
> [ 0.680660] really_probe+0x200/0x75c
> [ 0.680674] __driver_probe_device+0x100/0x2e4
> [ 0.680688] driver_probe_device+0x6c/0x1d4
> [ 0.680703] __device_attach_driver+0x170/0x238
> [ 0.680717] bus_for_each_drv+0xbc/0x18c
> [ 0.680734] __device_attach+0x124/0x2ec
> [ 0.680748] device_initial_probe+0x30/0x4c
> [ 0.680762] bus_probe_device+0x138/0x168
> [ 0.680775] deferred_probe_work_func+0x134/0x1fc
> [ 0.680790] process_scheduled_works+0x26c/0x73c
> [ 0.680808] worker_thread+0x294/0x690
> [ 0.680823] kthread+0x1fc/0x22c
> [ 0.680837] ret_from_fork+0x10/0x20
> [ 0.680853] ---[ end trace 0000000000000000 ]---
> [ 0.680923] mtk-ccifreq cci: Dropping the link to regulator.5
> [ 0.680941] device: 'regulator:regulator.5--platform:cci': device_unregister
> [ 0.681041] platform cci: Added to deferred list
>
> On Thu, 23 Nov 2023 at 08:25, Chen-Yu Tsai <wenst at chromium.org> wrote:
> >
> > Hi Bret,
> >
> > On Thu, Nov 16, 2023 at 12:52 AM Bret Joseph <bretjoseph at gmail.com> wrote:
> > >
> > > In mt6358-regulator.c
> > >
> > > static const struct regulator_ops mt6358_volt_table_ops = {
> > > .list_voltage = regulator_list_voltage_pickable_linear_range,
> > > .map_voltage = regulator_map_voltage_pickable_linear_range,
> > > .set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
> > > .get_voltage_sel = mt6358_get_buck_voltage_sel /*regulator_get_voltage_sel_pickable_regmap*/,
> > > .set_voltage_time_sel = regulator_set_voltage_time_sel,
> > > .enable = regulator_enable_regmap,
> > > .disable = regulator_disable_regmap,
> > > .is_enabled = regulator_is_enabled_regmap,
> > > .get_status = mt6358_get_status,
> > > };
> > >
> > > the function [regulator_get_voltage_sel_pickable_regmap] causes a -EINVAL when registering
> > >
> > > vsim1 vusb vcamd vefuse vmch vcama1 vemc vmc vldo28 vsim2
> > >
> > > using [mt6358_get_buck_voltage_sel] results in a successful probe
> >
> > Sure it will probe, but any values you read back will be bogus.
> >
> > Can you provide a dump of /sys/kernel/debug/regulator/regulator_summary
> > and `grep ^1e..: /sys/kernel/debug/regmap/1000d000.pwrap/registers`,
> > and also any relevant logs?
> >
> > ChenYu
More information about the Linux-mediatek
mailing list