[PATCH v3 2/3] clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes

[Fei Shao]

On Fri, Nov 3, 2023 at 6:25 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno at collabora.com> wrote:
>
> The top_dp and top_edp muxes can be both parented to either TVDPLL1
> or TVDPLL2, two identically specced PLLs for the specific purpose of
> giving out pixel clock: this becomes a problem when the MediaTek
> DisplayPort Interface (DPI) driver tries to set the pixel clock rate.
>
> In the usecase of two simultaneous outputs (using two controllers),
> it was seen that one of the displays would sometimes display garbled
> output (if any at all) and this was because:
>  - top_edp was set to TVDPLL1, outputting X GHz
>  - top_dp was set to TVDPLL2, outputting Y GHz
>    - mtk_dpi calls clk_set_rate(top_edp, Z GHz)
>      - top_dp is switched to TVDPLL1
>      - TVDPLL1 changes its rate, top_edp outputs the wrong rate.
>      - eDP display is garbled
>
> To solve this issue, remove all TVDPLL1 parents from `top_dp` and
> all TVDPLL2 parents from `top_edp`, plus, necessarily switch both
> clocks to use the new MUX_GATE_CLR_SET_UPD_INDEXED() macro to be
> able to use the right bit index for the new parents list.
>
> Reviewed-by: Alexandre Mergnat <amergnat at baylibre.com>
> Reviewed-by: Chen-Yu Tsai <wenst at chromium.org>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Reviewed-by: Fei Shao <fshao at chromium.org>