[PATCH 3/3] arm64: dts: mediatek: Add Acelink EW-7886CAX

[AngeloGioacchino Del Regno]

Il 20/11/23 18:27, Rafał Miłecki ha scritto:
> On 20.11.2023 15:17, AngeloGioacchino Del Regno wrote:
>> Il 17/11/23 11:43, Rafał Miłecki ha scritto:
>>> From: Rafał Miłecki <rafal at milecki.pl>
>>>
>>> Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point.
>>> It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and
>>> on-SoC Wi-Fi.
>>>
>>> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
>>> ---
>>>   arch/arm64/boot/dts/mediatek/Makefile         |   1 +
>>>   .../mediatek/mt7986a-acelink-ew-7886cax.dts   | 175 ++++++++++++++++++
>>>   2 files changed, 176 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile 
>>> b/arch/arm64/boot/dts/mediatek/Makefile
>>> index e6e7592a3645..9ff2ab6c5e4d 100644
>>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
>>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
>>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb
>>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
>>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
>>>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts 
>>> b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
>>> new file mode 100644
>>> index 000000000000..18d19281dfdb
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
>>> @@ -0,0 +1,175 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
>>> +
>>> +/dts-v1/;
>>> +#include <dt-bindings/input/input.h>
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/leds/common.h>
>>> +
>>> +#include "mt7986a.dtsi"
>>> +
>>> +/ {
>>> +    model = "Acelink EW-7886CAX";
>>> +    compatible = "acelink,ew-7886cax", "mediatek,mt7986a";
>>> +
>>> +    aliases {
>>> +        serial0 = &uart0;
>>> +    };
>>> +
>>> +    chosen {
>>> +        stdout-path = "serial0:115200n8";
>>> +    };
>>> +
>>> +    memory at 40000000 {
>>> +        reg = <0 0x40000000 0 0x20000000>;
>>> +        device_type = "memory";
>>> +    };
>>> +
>>> +    keys {
>>> +        compatible = "gpio-keys";
>>> +
>>> +        key-restart {
>>> +            label = "Reset";
>>> +            gpios = <&pio 7 GPIO_ACTIVE_LOW>;
>>> +            linux,code = <KEY_RESTART>;
>>> +        };
>>> +    };
>>> +
>>> +    leds {
>>> +        compatible = "gpio-leds";
>>> +
>>> +        led-0 {
>>
>> Please, reorder by name
>>
>>              color =    ...
>>              function = ...
>>              gpios = ...
> 
> Can you explain why and if there is a place I can find rules to follow
> regarding such aspects? I really would like to just be aware of all
> rules and don't waste anyone's time for such details.
> 
> FWIW I checked Documentation/devicetree/bindings/*.rst (after few years
> I admit) but I couldn't find anything there about properties order.
> 
> If we currently don't have rules I don't really think we should enforce
> following per-maintainer preferences. I really don't object your
> suggestions but there is simply no way to remember each maintainer's
> rules. We simply have too many subsystems and architectures boards.
> 
> 

What I said is not a maintainer preference but more of a general rule, which is
in the process of being documented.

Check the patch there, at the time of writing, v2:
https://lore.kernel.org/all/20231120084044.23838-1-krzysztof.kozlowski@linaro.org/

Regards,
Angelo