[PATCH 3/8] wifi: mt76: mt7996: add DMA support for mt7992

Shayne Chen shayne.chen at mediatek.com
Sun Nov 12 23:06:14 PST 2023


From: Benjamin Lin <benjamin-jw.lin at mediatek.com>

Add DMA TX/RX queues and RRO init flow for mt7992 chipsets.
This is a preliminary patch for mt7992 chipsets support.

Co-developed-by: StanleyYP Wang <StanleyYP.Wang at mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang at mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen at mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen at mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin at mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7996/dma.c   | 58 +++++++++++++++----
 .../net/wireless/mediatek/mt76/mt7996/init.c  |  9 ++-
 .../wireless/mediatek/mt76/mt7996/mt7996.h    |  7 ++-
 .../net/wireless/mediatek/mt76/mt7996/regs.h  |  4 +-
 4 files changed, 61 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/dma.c b/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
index e88096f442d3..c68fec628db5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/dma.c
@@ -57,13 +57,19 @@ static void mt7996_dma_config(struct mt7996_dev *dev)
 	RXQ_CONFIG(MT_RXQ_MCU, WFDMA0, MT_INT_RX_DONE_WM, MT7996_RXQ_MCU_WM);
 	RXQ_CONFIG(MT_RXQ_MCU_WA, WFDMA0, MT_INT_RX_DONE_WA, MT7996_RXQ_MCU_WA);
 
-	/* band0/band1 */
+	/* mt7996: band0 and band1, mt7992: band0 */
 	RXQ_CONFIG(MT_RXQ_MAIN, WFDMA0, MT_INT_RX_DONE_BAND0, MT7996_RXQ_BAND0);
 	RXQ_CONFIG(MT_RXQ_MAIN_WA, WFDMA0, MT_INT_RX_DONE_WA_MAIN, MT7996_RXQ_MCU_WA_MAIN);
 
-	/* band2 */
-	RXQ_CONFIG(MT_RXQ_BAND2, WFDMA0, MT_INT_RX_DONE_BAND2, MT7996_RXQ_BAND2);
-	RXQ_CONFIG(MT_RXQ_BAND2_WA, WFDMA0, MT_INT_RX_DONE_WA_TRI, MT7996_RXQ_MCU_WA_TRI);
+	if (is_mt7996(&dev->mt76)) {
+		/* mt7996 band2 */
+		RXQ_CONFIG(MT_RXQ_BAND2, WFDMA0, MT_INT_RX_DONE_BAND2, MT7996_RXQ_BAND2);
+		RXQ_CONFIG(MT_RXQ_BAND2_WA, WFDMA0, MT_INT_RX_DONE_WA_TRI, MT7996_RXQ_MCU_WA_TRI);
+	} else {
+		/* mt7992 band1 */
+		RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0, MT_INT_RX_DONE_BAND1, MT7996_RXQ_BAND1);
+		RXQ_CONFIG(MT_RXQ_BAND1_WA, WFDMA0, MT_INT_RX_DONE_WA_EXT, MT7996_RXQ_MCU_WA_EXT);
+	}
 
 	if (dev->has_rro) {
 		/* band0 */
@@ -90,8 +96,12 @@ static void mt7996_dma_config(struct mt7996_dev *dev)
 
 	/* data tx queue */
 	TXQ_CONFIG(0, WFDMA0, MT_INT_TX_DONE_BAND0, MT7996_TXQ_BAND0);
-	TXQ_CONFIG(1, WFDMA0, MT_INT_TX_DONE_BAND1, MT7996_TXQ_BAND1);
-	TXQ_CONFIG(2, WFDMA0, MT_INT_TX_DONE_BAND2, MT7996_TXQ_BAND2);
+	if (is_mt7996(&dev->mt76)) {
+		TXQ_CONFIG(1, WFDMA0, MT_INT_TX_DONE_BAND1, MT7996_TXQ_BAND1);
+		TXQ_CONFIG(2, WFDMA0, MT_INT_TX_DONE_BAND2, MT7996_TXQ_BAND2);
+	} else {
+		TXQ_CONFIG(1, WFDMA0, MT_INT_TX_DONE_BAND1, MT7996_TXQ_BAND1);
+	}
 
 	/* mcu tx queue */
 	MCUQ_CONFIG(MT_MCUQ_WM, WFDMA0, MT_INT_TX_DONE_MCU_WM, MT7996_TXQ_MCU_WM);
@@ -111,6 +121,7 @@ static u32 __mt7996_dma_prefetch_base(u16 *base, u8 depth)
 static void __mt7996_dma_prefetch(struct mt7996_dev *dev, u32 ofs)
 {
 	u16 base = 0;
+	u8 queue;
 
 #define PREFETCH(_depth)	(__mt7996_dma_prefetch_base(&base, (_depth)))
 	/* prefetch SRAM wrapping boundary for tx/rx ring. */
@@ -123,9 +134,14 @@ static void __mt7996_dma_prefetch(struct mt7996_dev *dev, u32 ofs)
 	mt76_wr(dev, MT_RXQ_BAND1_CTRL(MT_RXQ_MCU) + ofs, PREFETCH(0x2));
 	mt76_wr(dev, MT_RXQ_BAND1_CTRL(MT_RXQ_MCU_WA) + ofs, PREFETCH(0x2));
 	mt76_wr(dev, MT_RXQ_BAND1_CTRL(MT_RXQ_MAIN_WA) + ofs, PREFETCH(0x2));
-	mt76_wr(dev, MT_RXQ_BAND1_CTRL(MT_RXQ_BAND2_WA) + ofs, PREFETCH(0x2));
+
+	queue = is_mt7996(&dev->mt76) ? MT_RXQ_BAND2_WA : MT_RXQ_BAND1_WA;
+	mt76_wr(dev, MT_RXQ_BAND1_CTRL(queue) + ofs, PREFETCH(0x2));
+
 	mt76_wr(dev, MT_RXQ_BAND1_CTRL(MT_RXQ_MAIN) + ofs, PREFETCH(0x10));
-	mt76_wr(dev, MT_RXQ_BAND1_CTRL(MT_RXQ_BAND2) + ofs, PREFETCH(0x10));
+
+	queue = is_mt7996(&dev->mt76) ? MT_RXQ_BAND2 : MT_RXQ_BAND1;
+	mt76_wr(dev, MT_RXQ_BAND1_CTRL(queue) + ofs, PREFETCH(0x10));
 
 	if (dev->has_rro) {
 		mt76_wr(dev, MT_RXQ_BAND1_CTRL(MT_RXQ_RRO_BAND0) + ofs,
@@ -488,7 +504,7 @@ int mt7996_dma_init(struct mt7996_dev *dev)
 	if (ret)
 		return ret;
 
-	/* rx data queue for band0 and band1 */
+	/* rx data queue for band0 and mt7996 band1 */
 	if (mtk_wed_device_active(wed) && mtk_wed_get_rx_capa(wed)) {
 		dev->mt76.q_rx[MT_RXQ_MAIN].flags = MT_WED_Q_RX(0);
 		dev->mt76.q_rx[MT_RXQ_MAIN].wed = wed;
@@ -517,7 +533,7 @@ int mt7996_dma_init(struct mt7996_dev *dev)
 		return ret;
 
 	if (mt7996_band_valid(dev, MT_BAND2)) {
-		/* rx data queue for band2 */
+		/* rx data queue for mt7996 band2 */
 		rx_base = MT_RXQ_RING_BASE(MT_RXQ_BAND2) + hif1_ofs;
 		ret = mt76_queue_alloc(dev, &dev->mt76.q_rx[MT_RXQ_BAND2],
 				       MT_RXQ_ID(MT_RXQ_BAND2),
@@ -527,7 +543,7 @@ int mt7996_dma_init(struct mt7996_dev *dev)
 		if (ret)
 			return ret;
 
-		/* tx free notify event from WA for band2
+		/* tx free notify event from WA for mt7996 band2
 		 * use pcie0's rx ring3, but, redirect pcie0 rx ring3 interrupt to pcie1
 		 */
 		if (mtk_wed_device_active(wed_hif2) && !dev->has_rro) {
@@ -542,6 +558,26 @@ int mt7996_dma_init(struct mt7996_dev *dev)
 				       MT_RXQ_RING_BASE(MT_RXQ_BAND2_WA));
 		if (ret)
 			return ret;
+	} else if (mt7996_band_valid(dev, MT_BAND1)) {
+		/* rx data queue for mt7992 band1 */
+		rx_base = MT_RXQ_RING_BASE(MT_RXQ_BAND1) + hif1_ofs;
+		ret = mt76_queue_alloc(dev, &dev->mt76.q_rx[MT_RXQ_BAND1],
+				       MT_RXQ_ID(MT_RXQ_BAND1),
+				       MT7996_RX_RING_SIZE,
+				       MT_RX_BUF_SIZE,
+				       rx_base);
+		if (ret)
+			return ret;
+
+		/* tx free notify event from WA for mt7992 band1 */
+		rx_base = MT_RXQ_RING_BASE(MT_RXQ_BAND1_WA) + hif1_ofs;
+		ret = mt76_queue_alloc(dev, &dev->mt76.q_rx[MT_RXQ_BAND1_WA],
+				       MT_RXQ_ID(MT_RXQ_BAND1_WA),
+				       MT7996_RX_MCU_RING_SIZE,
+				       MT_RX_BUF_SIZE,
+				       rx_base);
+		if (ret)
+			return ret;
 	}
 
 	if (mtk_wed_device_active(wed) && mtk_wed_get_rx_capa(wed) &&
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index 2a7c367afae1..0cf0d1fe420a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -513,7 +513,12 @@ void mt7996_mac_init(struct mt7996_dev *dev)
 	mt76_rmw_field(dev, MT_DMA_TCRF1(2), MT_DMA_TCRF1_QIDX, 0);
 
 	/* rro module init */
-	mt7996_mcu_set_rro(dev, UNI_RRO_SET_PLATFORM_TYPE, 2);
+	if (is_mt7996(&dev->mt76))
+		mt7996_mcu_set_rro(dev, UNI_RRO_SET_PLATFORM_TYPE, 2);
+	else
+		mt7996_mcu_set_rro(dev, UNI_RRO_SET_PLATFORM_TYPE,
+				   dev->hif2 ? 7 : 0);
+
 	if (dev->has_rro) {
 		u16 timeout;
 
@@ -570,7 +575,7 @@ static int mt7996_register_phy(struct mt7996_dev *dev, struct mt7996_phy *phy,
 	if (phy)
 		return 0;
 
-	if (band == MT_BAND2 && dev->hif2) {
+	if (is_mt7996(&dev->mt76) && band == MT_BAND2 && dev->hif2) {
 		hif1_ofs = MT_WFDMA0_PCIE1(0) - MT_WFDMA0(0);
 		wed = &dev->mt76.mmio.wed_hif2;
 	}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
index 1a36ef50f6e1..87822663870f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h
@@ -104,10 +104,10 @@ enum mt7996_rxq_id {
 	MT7996_RXQ_MCU_WM = 0,
 	MT7996_RXQ_MCU_WA,
 	MT7996_RXQ_MCU_WA_MAIN = 2,
-	MT7996_RXQ_MCU_WA_EXT = 2,/* unused */
+	MT7996_RXQ_MCU_WA_EXT = 3, /* for mt7992 */
 	MT7996_RXQ_MCU_WA_TRI = 3,
 	MT7996_RXQ_BAND0 = 4,
-	MT7996_RXQ_BAND1 = 4,/* unused */
+	MT7996_RXQ_BAND1 = 5, /* for mt7992 */
 	MT7996_RXQ_BAND2 = 5,
 	MT7996_RXQ_RRO_BAND0 = 8,
 	MT7996_RXQ_RRO_BAND1 = 8,/* unused */
@@ -399,6 +399,9 @@ mt7996_phy3(struct mt7996_dev *dev)
 static inline bool
 mt7996_band_valid(struct mt7996_dev *dev, u8 band)
 {
+	if (is_mt7992(&dev->mt76))
+		return band <= MT_BAND1;
+
 	/* tri-band support */
 	if (band <= MT_BAND2 &&
 	    mt76_get_field(dev, MT_PAD_GPIO, MT_PAD_GPIO_ADIE_COMB) <= 1)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/regs.h b/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
index aee577d90ddb..6623a6ba12d6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/regs.h
@@ -461,12 +461,12 @@ enum base_rev {
 #define MT_INT1_MASK_CSR			MT_WFDMA0_PCIE1(0x204)
 
 #define MT_INT_RX_DONE_BAND0			BIT(12)
-#define MT_INT_RX_DONE_BAND1			BIT(12)
+#define MT_INT_RX_DONE_BAND1			BIT(13) /* for mt7992 */
 #define MT_INT_RX_DONE_BAND2			BIT(13)
 #define MT_INT_RX_DONE_WM			BIT(0)
 #define MT_INT_RX_DONE_WA			BIT(1)
 #define MT_INT_RX_DONE_WA_MAIN			BIT(2)
-#define MT_INT_RX_DONE_WA_EXT			BIT(2)
+#define MT_INT_RX_DONE_WA_EXT			BIT(3) /* for mt7992 */
 #define MT_INT_RX_DONE_WA_TRI			BIT(3)
 #define MT_INT_RX_TXFREE_MAIN			BIT(17)
 #define MT_INT_RX_TXFREE_TRI			BIT(15)
-- 
2.39.2




More information about the Linux-mediatek mailing list