[PATCH v14 08/56] media: videobuf2: Use vb2_get_num_buffers() helper
Benjamin Gaignard
benjamin.gaignard at collabora.com
Wed Nov 8 05:22:23 PST 2023
Le 08/11/2023 à 10:42, Tomasz Figa a écrit :
> On Tue, Oct 31, 2023 at 05:30:16PM +0100, Benjamin Gaignard wrote:
>> Stop using queue num_buffers field directly, instead use
>> vb2_get_num_buffers().
>> This prepares for the future 'delete buffers' feature where there are
>> holes in the buffer indices.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
>> ---
>> .../media/common/videobuf2/videobuf2-core.c | 92 +++++++++++--------
>> .../media/common/videobuf2/videobuf2-v4l2.c | 4 +-
>> 2 files changed, 54 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
>> index b406a30a9b35..c5c5ae4d213d 100644
>> --- a/drivers/media/common/videobuf2/videobuf2-core.c
>> +++ b/drivers/media/common/videobuf2/videobuf2-core.c
>> @@ -444,13 +444,14 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
>> unsigned int num_buffers, unsigned int num_planes,
>> const unsigned plane_sizes[VB2_MAX_PLANES])
>> {
>> + unsigned int q_num_buffers = vb2_get_num_buffers(q);
>> unsigned int buffer, plane;
>> struct vb2_buffer *vb;
>> int ret;
>>
>> /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */
>> num_buffers = min_t(unsigned int, num_buffers,
>> - VB2_MAX_FRAME - q->num_buffers);
>> + VB2_MAX_FRAME - q_num_buffers);
> I guess it's safe in this specific situation, but was there any reason
> behind not just calling vb2_get_num_buffers() directly here?
>
>>
>> for (buffer = 0; buffer < num_buffers; ++buffer) {
>> /* Allocate vb2 buffer structures */
>> @@ -470,7 +471,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
>> vb->planes[plane].min_length = plane_sizes[plane];
>> }
>>
>> - vb2_queue_add_buffer(q, vb, q->num_buffers + buffer);
>> + vb2_queue_add_buffer(q, vb, q_num_buffers + buffer);
> In this case it should also be fine, but actually now this is a loop and if
> somone doesn't know what the other code in the loop does, one could be
> concerned that the num buffers actually could have changed, but we still
> use the cached one that we got at the beginning of the function.
>
> (Ideally I'd imagine vb2_queue_add_buffer() to append the buffer
> at the end of the queue and increment the num_buffers internally, but it
> doesn't have to happen now, as this series is already quite complex...)
That will be the case later in the series when I replace num_buffers field
by a bitmap. Until that I prefer to limit the changes in this loop.
>
>> call_void_bufop(q, init_buffer, vb);
>>
>> /* Allocate video buffer memory for the MMAP type */
> [snip]
>> @@ -2513,7 +2519,8 @@ void vb2_core_queue_release(struct vb2_queue *q)
>> __vb2_cleanup_fileio(q);
>> __vb2_queue_cancel(q);
>> mutex_lock(&q->mmap_lock);
>> - __vb2_queue_free(q, q->num_buffers);
>> + __vb2_queue_free(q, vb2_get_num_buffers(q));
>> + q->num_buffers = 0;
> Unrelated change?
No because I found a case where q->num_buffers wasn't correctly reset while testing.
>
>> mutex_unlock(&q->mmap_lock);
>> }
>> EXPORT_SYMBOL_GPL(vb2_core_queue_release);
>> @@ -2542,7 +2549,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file,
>> /*
>> * Start file I/O emulator only if streaming API has not been used yet.
>> */
>> - if (q->num_buffers == 0 && !vb2_fileio_is_active(q)) {
>> + if (vb2_get_num_buffers(q) == 0 && !vb2_fileio_is_active(q)) {
>> if (!q->is_output && (q->io_modes & VB2_READ) &&
>> (req_events & (EPOLLIN | EPOLLRDNORM))) {
>> if (__vb2_init_fileio(q, 1))
>> @@ -2580,7 +2587,7 @@ __poll_t vb2_core_poll(struct vb2_queue *q, struct file *file,
>> * For output streams you can call write() as long as there are fewer
>> * buffers queued than there are buffers available.
>> */
>> - if (q->is_output && q->fileio && q->queued_count < q->num_buffers)
>> + if (q->is_output && q->fileio && q->queued_count < vb2_get_num_buffers(q))
>> return EPOLLOUT | EPOLLWRNORM;
>>
>> if (list_empty(&q->done_list)) {
>> @@ -2629,8 +2636,8 @@ struct vb2_fileio_buf {
>> * struct vb2_fileio_data - queue context used by file io emulator
>> *
>> * @cur_index: the index of the buffer currently being read from or
>> - * written to. If equal to q->num_buffers then a new buffer
>> - * must be dequeued.
>> + * written to. If equal to number of already queued buffers
>> + * then a new buffer must be dequeued.
> Hmm, that's a significant meaning change compared to the original text. Is
> it indended?
Does "If equal to number of buffers in the vb2_queue then a new buffer must be dequeued."
sound better for you ?
>
>> * @initial_index: in the read() case all buffers are queued up immediately
>> * in __vb2_init_fileio() and __vb2_perform_fileio() just cycles
>> * buffers. However, in the write() case no buffers are initially
>> @@ -2640,7 +2647,7 @@ struct vb2_fileio_buf {
>> * buffers. This means that initially __vb2_perform_fileio()
>> * needs to know what buffer index to use when it is queuing up
>> * the buffers for the first time. That initial index is stored
>> - * in this field. Once it is equal to q->num_buffers all
>> + * in this field. Once it is equal to num_buffers all
> It's not clear what num_buffers means here. Would it make sense to instead
> say "number of buffers in the vb2_queue"?
Yes I will change that
>
>> * available buffers have been queued and __vb2_perform_fileio()
>> * should start the normal dequeue/queue cycle.
>> *
>> @@ -2690,7 +2697,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
>> /*
>> * Check if streaming api has not been already activated.
>> */
>> - if (q->streaming || q->num_buffers > 0)
>> + if (q->streaming || vb2_get_num_buffers(q) > 0)
>> return -EBUSY;
>>
>> /*
>> @@ -2740,7 +2747,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
>> /*
>> * Get kernel address of each buffer.
>> */
>> - for (i = 0; i < q->num_buffers; i++) {
>> + for (i = 0; i < vb2_get_num_buffers(q); i++) {
>> /* vb can never be NULL when using fileio. */
>> vb = vb2_get_buffer(q, i);
>>
>> @@ -2759,18 +2766,23 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
>> /*
>> * Queue all buffers.
>> */
>> - for (i = 0; i < q->num_buffers; i++) {
>> - ret = vb2_core_qbuf(q, q->bufs[i], NULL, NULL);
>> + for (i = 0; i < vb2_get_num_buffers(q); i++) {
>> + struct vb2_buffer *vb2 = vb2_get_buffer(q, i);
>> +
>> + if (!vb2)
>> + continue;
>> +
>> + ret = vb2_core_qbuf(q, vb2, NULL, NULL);
>> if (ret)
>> goto err_reqbufs;
>> fileio->bufs[i].queued = 1;
>> }
> Doesn't this part belong to the previous patch that changes q->bufs[x] to
> vb2_get_buffer()?
Yes I will change that too.
>
>> /*
>> * All buffers have been queued, so mark that by setting
>> - * initial_index to q->num_buffers
>> + * initial_index to num_buffers
> What num_buffers?
I will use your wording: "the number of buffers in the vb2_queue"
>
>> */
>> - fileio->initial_index = q->num_buffers;
>> - fileio->cur_index = q->num_buffers;
>> + fileio->initial_index = vb2_get_num_buffers(q);
>> + fileio->cur_index = fileio->initial_index;
>> }
>>
>> /*
>> @@ -2964,12 +2976,12 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_
>> * If we are queuing up buffers for the first time, then
>> * increase initial_index by one.
>> */
>> - if (fileio->initial_index < q->num_buffers)
>> + if (fileio->initial_index < vb2_get_num_buffers(q))
>> fileio->initial_index++;
>> /*
>> * The next buffer to use is either a buffer that's going to be
>> - * queued for the first time (initial_index < q->num_buffers)
>> - * or it is equal to q->num_buffers, meaning that the next
>> + * queued for the first time (initial_index < num_buffers)
>> + * or it is equal to num_buffers, meaning that the next
> What num_buffers?
Same here
>
> Best regards,
> Tomasz
> _______________________________________________
> Kernel mailing list -- kernel at mailman.collabora.com
> To unsubscribe send an email to kernel-leave at mailman.collabora.com
More information about the Linux-mediatek
mailing list