[PATCH 1/2] dt-bindings: thermal: mediatek: Move auxdac binding to yaml

[Matthias Brugger]

On 31/05/2023 09:57, Krzysztof Kozlowski wrote:
> On 30/05/2023 17:04, matthias.bgg at kernel.org wrote:
>> From: Matthias Brugger <matthias.bgg at gmail.com>
>>
>> Convert the older binding to yaml syntax.
>>
>> Signed-off-by: Matthias Brugger <matthias.bgg at gmail.com>
>> ---
>>
>>   .../bindings/thermal/mediatek,thermal.yaml    | 168 ++++++++++++++++++
>>   .../bindings/thermal/mediatek-thermal.txt     |  52 ------
>>   2 files changed, 168 insertions(+), 52 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml
>>   delete mode 100644 Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml
>> new file mode 100644
>> index 000000000000..7aa2bdc43567
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml
>> @@ -0,0 +1,168 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: MediaTek Thermal Sensor
>> +
>> +maintainers:
>> +  - Matthias Brugger <matthias.bgg at gmail.com>
>> +
>> +description: |
>> +  The MediaTek thermal controller measures the on-SoC temperatures.
>> +  This device does not have its own ADC, instead it directly controls
>> +  the AUXADC via AHB bus accesses. For this reason this device needs
>> +  phandles to the AUXADC. Also it controls a mux in the apmixedsys
>> +  register space via AHB bus accesses, so a phandle to the APMIXEDSYS
>> +  is also needed.
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - enum:
>> +          - mediatek,mt2701-thermal
>> +          - mediatek,mt2712-thermal
>> +          - mediatek,mt7622-thermal
>> +          - mediatek,mt7986-thermal
>> +          - mediatek,mt8173-thermal
>> +          - mediatek,mt8183-thermal
>> +          - mediatek,mt8365-thermal
>> +      - items:
>> +          - const: mediatek,mt7981-thermal
>> +          - const: mediatek,mt7986-thermal
>> +      - items:
>> +          - const: mediatek,mt8516-thermal
>> +          - const: mediatek,mt2701-thermal
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    minItems: 2
> 
> maxItems instead
> 
>> +
>> +  clock-names:
>> +    items:
>> +      - const: therm
>> +      - const: auxadc
>> +
>> +  resets:
>> +    maxItems: 1
>> +    description: Reference to the reset controller controlling the thermal controller.
> 
> You can drop description, it's obvious.
> 
>> +
>> +  reset-names:
>> +    items:
>> +      - const: therm
>> +
>> +  nvmem-cells:
>> +    items:
>> +      - description: Calibration eFuse data. If unspecified default values are used.
>> +
>> +  nvmem-cell-names:
>> +    items:
>> +      - const: calibration-data
>> +
>> +  mediatek,auxadc:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description:
>> +      A phandle to the AUXADC which the thermal controller uses.
>> +
>> +  mediatek,apmixedsys:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description:
>> +      A phandle to the APMIXEDSYS controller.
>> +
>> +  "#thermal-sensor-cells":
>> +    const: 1
>> +
>> +  bank0-supply:
>> +    description: Regulator node supplying voltage to the first bank
>> +
>> +  bank1-supply:
>> +    description: Regulator node supplying voltage to the second bank
> 
> These were not present before. Mention this in commit msg. Also drop "node".
> 
>> +
>> +
> 
> Just one blank line.
> 
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - clocks
>> +  - mediatek,auxadc
>> +  - mediatek,apmixedsys
>> +  - "#thermal-sensor-cells"
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    #include <dt-bindings/clock/mt8173-clk.h>
>> +    #include <dt-bindings/reset/mt8173-resets.h>
>> +
>> +    soc {
>> +      #address-cells = <2>;
>> +      #size-cells = <2>;
>> +
>> +      auxadc: auxadc at 11001000 {
>> +        compatible = "mediatek,mt8173-auxadc";
>> +        reg = <0 0x11001000 0 0x1000>;
>> +        clocks = <&pericfg CLK_PERI_AUXADC>;
>> +        clock-names = "main";
>> +        #io-channel-cells = <1>;
>> +      };
>> +
>> +      apmixedsys: clock-controller at 10209000 {
>> +        compatible = "mediatek,mt8173-apmixedsys";
>> +        reg = <0 0x10209000 0 0x1000>;
>> +        #clock-cells = <1>;
>> +      };
> 
> Drop both examples, not really relevant to thermal. It grows the example
> with code already documented somewhere else.
> 

auxadc and apmixedsys are no examples. They are referenced by the thermal node 
as described in the binding. Without them the example won't be complete.

Regards,
Matthias

>> +
>> +      thermal: thermal at 1100b000 {
>> +        #thermal-sensor-cells = <1>;
>> +        compatible = "mediatek,mt8173-thermal";
>> +        reg = <0 0x1100b000 0 0x1000>;
>> +        interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
>> +        clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
>> +        clock-names = "therm", "auxadc";
>> +        resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
>> +        reset-names = "therm";
>> +        mediatek,auxadc = <&auxadc>;
>> +        mediatek,apmixedsys = <&apmixedsys>;
>> +        nvmem-cells = <&thermal_calibration_data>;
>> +        nvmem-cell-names = "calibration-data";
>> +      };
>> +
>> +      thermal-zones {
>> +        cpu_thermal: cpu-thermal {
>> +          polling-delay-passive = <1000>;
>> +          polling-delay = <1000>;
>> +
>> +          thermal-sensors = <&thermal 0>;
>> +          sustainable-power = <1500>;
>> +
>> +          trips {
>> +            threshold: trip-point0 {
>> +              temperature = <68000>;
>> +              hysteresis = <2000>;
>> +              type = "passive";
>> +            };
>> +
>> +            target: trip-point1 {
>> +              temperature = <85000>;
>> +              hysteresis = <2000>;
>> +              type = "passive";
>> +            };
>> +
>> +            cpu_crit: cpu_crit0 {
> 
> No underscores in node names.
> 
> 
> Best regards,
> Krzysztof
>