[PATCH v4 05/11] drm/mediatek: gamma: Enable the Gamma LUT table only after programming

[AngeloGioacchino Del Regno]

Move the write to DISP_GAMMA_CFG to enable the Gamma LUT to after
programming the actual table to avoid potential visual glitches during
table modification.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Reviewed-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
index 60ccea8c1e1a..1592614b6de7 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
@@ -71,12 +71,12 @@ unsigned int mtk_gamma_get_lut_size(struct device *dev)
 void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crtc_state *state)
 {
 	struct mtk_disp_gamma *gamma = dev_get_drvdata(dev);
-	unsigned int i, reg;
+	unsigned int i;
 	struct drm_color_lut *lut;
 	void __iomem *lut_base;
 	bool lut_diff;
 	u16 lut_size;
-	u32 word;
+	u32 cfg_val, word;
 
 	/* If there's no gamma lut there's nothing to do here. */
 	if (!state->gamma_lut)
@@ -90,9 +90,7 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
 		lut_size = LUT_SIZE_DEFAULT;
 	}
 
-	reg = readl(regs + DISP_GAMMA_CFG);
-	reg = reg | GAMMA_LUT_EN;
-	writel(reg, regs + DISP_GAMMA_CFG);
+	cfg_val = readl(regs + DISP_GAMMA_CFG);
 	lut_base = regs + DISP_GAMMA_LUT;
 	lut = (struct drm_color_lut *)state->gamma_lut->data;
 	for (i = 0; i < lut_size; i++) {
@@ -122,6 +120,11 @@ void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct drm_crt
 		}
 		writel(word, (lut_base + i * 4));
 	}
+
+	/* Enable the gamma table */
+	cfg_val = cfg_val | GAMMA_LUT_EN;
+
+	writel(cfg_val, regs + DISP_GAMMA_CFG);
 }
 
 void mtk_gamma_set(struct device *dev, struct drm_crtc_state *state)
-- 
2.40.1