[PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy

Julien Stephan jstephan at baylibre.com
Mon May 15 07:07:07 PDT 2023


On Mon, May 15, 2023 at 02:22:52PM +0200, AngeloGioacchino Del Regno wrote:
> > +#define CSIxB_OFFSET		0x1000
>
> What if we grab two (or three?) iospaces from devicetree?
>
> - base (global)
> - csi_a
> - csi_b
>
> That would make it possible to maybe eventually extend this driver to more
> versions (older or newer) of the CSI PHY IP without putting fixes offsets
> inside of platform data structures and such.
>
Hi Angelo,
The register bank of the CSI port is divided into 2:
* from base address to base + 0x1000 (port A)
* from base + 0x1000 to base +0x2000 (port B)
Some CSI port can be configured in 4D1C mode (4 data + 1 clock) using
the whole register bank from base to base + 0x2000 or in 2D1C mode (2 data +
1 clock) and use either port A or port B.

For example  mt8365 has CSI0 that can be used either in 4D1C mode or in
2 * 2D1C and CSI1 which can use only 4D1C mode

2D1C mode can not be tested and is not implemented in the driver so
I guess adding csi_a and csi_b reg value may be confusing?

What do you think?

Regards,
Julien



More information about the Linux-mediatek mailing list