[PATCH 10/17] mt76: Use pcie_lnkctl_clear_and_set() for changing LNKCTL

Ilpo Järvinen ilpo.jarvinen at linux.intel.com
Thu May 11 06:14:34 PDT 2023


Don't assume that only the driver would be accessing LNKCTL. ASPM
policy changes can trigger write to LNKCTL outside of driver's control.
And in the case of upstream (parent), the driver does not even own the
device it's changing LNKCTL for.

Use pcie_lnkctl_clear_and_set() which does proper locking to avoid
losing concurrent updates to the register value.

Suggested-by: Lukas Wunner <lukas at wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen at linux.intel.com>
---
 drivers/net/wireless/mediatek/mt76/pci.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/pci.c b/drivers/net/wireless/mediatek/mt76/pci.c
index 4c1c159fbb62..8c6444f5fac3 100644
--- a/drivers/net/wireless/mediatek/mt76/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/pci.c
@@ -39,9 +39,8 @@ void mt76_pci_disable_aspm(struct pci_dev *pdev)
 	/* both device and parent should have the same ASPM setting.
 	 * disable ASPM in downstream component first and then upstream.
 	 */
-	pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_conf);
+	pcie_lnkctl_clear_and_set(pdev, aspm_conf, 0);
 	if (parent)
-		pcie_capability_clear_word(parent, PCI_EXP_LNKCTL,
-					   aspm_conf);
+		pcie_lnkctl_clear_and_set(parent, aspm_conf, 0);
 }
 EXPORT_SYMBOL_GPL(mt76_pci_disable_aspm);
-- 
2.30.2




More information about the Linux-mediatek mailing list