[PATCH 1/8] net: phy: realtek: rtl8221: allow to configure SERDES mode

[Andrew Lunn]

> +#define RTL8221B_MMD_SERDES_CTRL		MDIO_MMD_VEND1
> +#define RTL8221B_MMD_PHY_CTRL			MDIO_MMD_VEND2

I suggest you don't do this. Use MDIO_MMD_VEND[1|2] to make it clear
these are vendor registers.

> +	case RTL8221B_SERDES_OPTION_MODE_2500BASEX_SGMII:
> +	case RTL8221B_SERDES_OPTION_MODE_2500BASEX:
> +		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6a04, 0x0503);
> +		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f10, 0xd455);
> +		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f11, 0x8020);
> +		break;
> +	case RTL8221B_SERDES_OPTION_MODE_HISGMII_SGMII:
> +	case RTL8221B_SERDES_OPTION_MODE_HISGMII:
> +		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6a04, 0x0503);
> +		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f10, 0xd433);
> +		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f11, 0x8020);
> +		break;
> +	}

Is there anything in the datasheet to indicate register names and what
the values mean? It would be good to replace these magic values with
#defines.

	Andrew