[PATCH v2 4/4] clocksource/drivers/timer-mediatek: Make timer-mediatek become loadable module
Walter Chang (張維哲)
Walter.Chang at mediatek.com
Tue Mar 28 23:22:57 PDT 2023
On Thu, 2023-02-16 at 12:36 +0100, AngeloGioacchino Del Regno wrote:
> Il 16/02/23 12:23, Matthias Brugger ha scritto:
> >
> >
> > On 16/02/2023 11:22, AngeloGioacchino Del Regno wrote:
> > > Il 15/02/23 15:46, Sudeep Holla ha scritto:
> > > > On Wed, Feb 15, 2023 at 02:30:51PM +0100, AngeloGioacchino Del
> > > > Regno wrote:
> > > > >
> > > > > Both. I mean that these platforms do have architected timers,
> > > > > but they are stopped
> > > > > before the bootloader jumps to the kernel, or they are never
> > > > > started at all.
> > > > >
> > > > > Please refer to:
> > > > >
> > > > >
https://urldefense.com/v3/__https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/clocksource/timer-mediatek.c?h=next-20230215&id=327e93cf9a59b0d04eb3a31a7fdbf0f11cf13ecb__;!!CTRNKA9wMg0ARbw!jOX04TQn1HXcKOdzAiK3ZlqsSE3j3p6Zo-Cajr0khXC9ANlbkl8kQrUgx6wadR8b_46o9J0SbJgjhoS03rQ7somJfA5Z9L6G_g$
> > > > >
> > > > >
> > > > > For a nice explanation.
> > > > >
> > > >
> > > > Thanks for that. Well then I see no point in making these
> > > > modules if you
> > > > can't have generic Image that boots on all the platform. I now
> > > > tend to think
> > > > that these are made modules just because GKI demands and it
> > > > *might* work
> > > > on one or 2 platforms. One we move this as modules, how will be
> > > > know the
> > > > Image without these timers or with them built as modules will
> > > > boot or not
> > > > on a given mediatek platform. Sorry, I initially saw some point
> > > > in making
> > > > these timers as modules but if they are required for boot on
> > > > some systems
> > > > then I see no point. So if that is the case, NACK for these as
> > > > it just
> > > > creates more confusion after these are merged as why some
> > > > Images or
> > > > even why defconfig image(if we push the config change as well)
> > > > is not
> > > > booting on these platforms.
> > > >
> > > > It is no longer just for system timer useful in low power CPU
> > > > idle states
> > > > as I initial thought.
> > > >
> > >
> > > I think that there is still a point in modularization for this
> > > driver and I
> > > can propose a rather simple solution, even though this may add
> > > some, rather
> > > little, code duplication to the mix.
> > >
> > > The platforms that I've described (like mt6795) need the system
> > > timer to be
> > > initialized as early as possible - that's true - but that timer
> > > is always
> > > "CPUXGPT".
> > >
> > > On those platforms, you *still* have multiple timers:
> > > - CPUX (short for cpuxgpt), used only as system timer;
> > > - SYST, as another system timer implementation (additional
> > > timers) but
> > > those are always initialized (AFAIK) from the bootloader
> > > before booting;
> > > - GPT (General Purpose Timer).
> > >
> > > On one SoC, you may have:
> > > - CPUX *and* SYST
> > > - CPUX *and* GPT
> > > - CPUX *and* SYST *and* GPT
> > >
> > > ... where the only one that is boot critical and needs to be
> > > initialized early
> > > is always only CPUX.
> > >
> > > Hence this proposal: to still allow modularization of timers on
> > > MediaTek platforms,
> > > we could eventually split the CPUX as a separated driver that
> > > *cannot be*, due to
> > > the previously explained constraints, compiled as module, hence
> > > always built-in,
> > > from a timer-mediatek driver that could be a module and capable
> > > of handling only
> > > SYST and GPT timers.
> > >
> > > In that case, we'd hence have...
> > > - timer-mediatek-cpux.o (bool)
> > > - timer-mediatek.c (tristate)
> > >
> > > Counting that the CPUX timers are actually even using different
> > > `tick_resume`
> > > and `set_state_shutdown` callbacks (doing only a IRQ
> > > clear/restore and nothing
> > > else), the amount of duplication would be .. well, again,
> > > minimal, but then
> > > this means that timer-mediatek-cpux would be `default y if
> > > ARCH_MEDIATEK`, or
> > > even selected by ARCH_MEDIATEK itself.
> > >
> > > If you think that this could be a good solution, I can send a
> > > "fast" patch to
> > > split it out, preparing the ground for the people doing this
> > > module work.
> > >
> > > Any considerations?
> > >
> >
> > I think your proposal sounds acceptable, but we would need to make
> > sure that all
> > SoCs can boot with the CPUX driver. I'm aware of some armv7 SoCs
> > that use a kind of
> > hack to enable the architecture timer [1]. This, for one part,
> > should be moved to
> > CPUX, if possible. For the other part it makes me wonder if really
> > all supported
> > MediaTek platforms will boot with SYST/GPT being a module. I think
> > we will need
> > some effort from the community to test that.
> >
> > So as a resume, yes I think your approach is feasible but we should
> > collect
> > tested-by tags before merging it.
> >
> > Regards,
> > Matthias
> >
> >
> > [1]
> >
https://urldefense.com/v3/__https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/mach-mediatek/mediatek.c?h=v6.2-rc8*n16__;Iw!!CTRNKA9wMg0ARbw!jOX04TQn1HXcKOdzAiK3ZlqsSE3j3p6Zo-Cajr0khXC9ANlbkl8kQrUgx6wadR8b_46o9J0SbJgjhoS03rQ7somJfA5mnCQ6Fw$
> >
>
> Right. I completely forgot about those platforms, even though my
> intention was
> to actually try and migrate them once the CPUX was picked. My bad.
>
> Well, I think that this module conversion will take quite a while, so
> there
> should be no need to rush... I'll send a series later with the split
> *and* a
> conversion of those platforms, so that we will see a removal of that
> mediatek_timer_init() function.
>
> Some encouraging words ahead: I'm totally confident that the
> conversion will
> Just Work, because the MT6795 SoC had the same handling for CPUXGPT
> as the
> older MT6589/7623/8127/8135... as that SoC had two implementations
> initially,
> one as ARM, one as ARM64.
>
> Whatever - let's see what I can come up with, then.
>
> Cheers,
> Angelo
First, I'd like to thank Angelo for assisting us in spliting out the
CPUX driver [1], allowing this driver to become a module that can be
loaded when needed.
In response to Matthias's concern about whether SYST/GPT on the old
MediaTek platforms can boot properly with the loadable module, I
recently conducted a few tests and found that both hardwares are
capable of booting normally with this loadable module.
For my experiments, I used MT6768 with this patch:
1. When the module was not loaded or load the module but the
corresponding compatible property was not specified in the dts, the
following results were obtained:
# cat /proc/timer_list | grep "Broadcast device" -A 15
Broadcast device
Clock Event Device: bc_hrtimer
max_delta_ns: 9223372036854775807
min_delta_ns: 1
mult: 1
shift: 0
mode: 3
next_event: 490204000000 nsecs
set_next_event: <0000000000000000>
shutdown: bc_shutdown.cfi_jt
event_handler: tick_handle_oneshot_broadcast.cfi_jt
retries: 0
tick_broadcast_mask: ff
tick_broadcast_oneshot_mask: 7e
The built-in `bc_hrtimer` was used as the broadcast device, whereby one
CPU was kept awake to wake up the other CPUs. As a result, one CPU
could not enter the idle state.
2. When the module was loaded and the GPT compatible property was
specified in the dts:
# cat /proc/timer_list | grep "Broadcast device" -A 17
Broadcast device
Clock Event Device: mtk-clkevt
max_delta_ns: 330382104634
min_delta_ns: 1000
mult: 27917287
shift: 31
mode: 3
next_event: 1483221016462 nsecs
set_next_event: mtk_gpt_clkevt_next_event.cfi_jt
shutdown: mtk_gpt_clkevt_shutdown.cfi_jt
periodic: mtk_gpt_clkevt_set_periodic.cfi_jt
oneshot: mtk_gpt_clkevt_shutdown.cfi_jt
resume: mtk_gpt_clkevt_shutdown.cfi_jt
event_handler: tick_handle_oneshot_broadcast.cfi_jt
retries: 17
tick_broadcast_mask: ff
tick_broadcast_oneshot_mask: bf
3. When the module was loaded and the SYST compatible property was
specified in the dts:
# cat /proc/timer_list | grep "Broadcast device" -A 17
Broadcast device
Clock Event Device: mtk-clkevt
max_delta_ns: 330382104634
min_delta_ns: 1000
mult: 27917287
shift: 31
mode: 3
next_event: 132252000000 nsecs
set_next_event: mtk_syst_clkevt_next_event.cfi_jt
shutdown: mtk_syst_clkevt_shutdown.cfi_jt
oneshot: mtk_syst_clkevt_oneshot.cfi_jt
resume: mtk_syst_clkevt_resume.cfi_jt
event_handler: tick_handle_oneshot_broadcast.cfi_jt
retries: 8
tick_broadcast_mask: ff
tick_broadcast_oneshot_mask: 3f
These two experiments show that SYST/GPT on the old MediaTek platforms
can also work properly with the loadable module, and will not cause any
booting issues. Therefore, making timer-mediatek.c driver into a
loadable module is feasible.
Thanks,
Walter Chang
[1]
https://lore.kernel.org/lkml/20230309103913.116775-1-angelogioacchino.delregno@collabora.com/
More information about the Linux-mediatek
mailing list