[PATCH] thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask

[Chen-Yu Tsai]

The binary representation for sensor 1 interrupt status was incorrectly
assembled, when compared to the full table given in the same comment
section. The conversion into hex was also incorrect, leading to
incorrect interrupt status bitmask for sensor 1. This would cause the
driver to incorrectly identify changes for sensor 1, when in fact it
was sensor 0, or a sensor access time out.

Fix the binary and hex representations in the comments, and the actual
bitmask macro.

Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
---
 drivers/thermal/mediatek/lvts_thermal.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index ca16c90e1d55..d87d3847c7d0 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -66,7 +66,7 @@
 #define LVTS_MONINT_CONF			0x9FBF7BDE
 
 #define LVTS_INT_SENSOR0			0x0009001F
-#define LVTS_INT_SENSOR1			0X000881F0
+#define LVTS_INT_SENSOR1			0x001203E0
 #define LVTS_INT_SENSOR2			0x00247C00
 #define LVTS_INT_SENSOR3			0x1FC00000
 
@@ -396,8 +396,8 @@ static irqreturn_t lvts_ctrl_irq_handler(struct lvts_ctrl *lvts_ctrl)
 	 *                  => 0x1FC00000
 	 * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000
 	 *                  => 0x00247C00
-	 * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000
-	 *                  => 0X000881F0
+	 * sensor 1 interrupt: 0000 0000 0001 0010 0000 0011 1110 0000
+	 *                  => 0X001203E0
 	 * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111
 	 *                  => 0x0009001F
 	 */
-- 
2.40.0.348.gf938b09366-goog