[PATCH v2] dt-bindings: display: Drop unneeded quotes
Rob Herring
robh at kernel.org
Mon Mar 20 16:38:21 PDT 2023
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu at kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Signed-off-by: Rob Herring <robh at kernel.org>
---
v2:
- Also drop quotes on URLs
---
.../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
.../display/amlogic,meson-dw-hdmi.yaml | 4 ++--
.../bindings/display/amlogic,meson-vpu.yaml | 4 ++--
.../display/bridge/analogix,anx7625.yaml | 4 ++--
.../display/bridge/cdns,mhdp8546.yaml | 4 ++--
.../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
.../display/bridge/toshiba,tc358767.yaml | 2 +-
.../bindings/display/dp-aux-bus.yaml | 2 +-
.../bindings/display/imx/nxp,imx8mq-dcss.yaml | 4 ++--
.../display/mediatek/mediatek,hdmi.yaml | 2 +-
.../display/msm/dsi-controller-main.yaml | 8 +++----
.../bindings/display/msm/dsi-phy-10nm.yaml | 2 +-
.../devicetree/bindings/display/msm/gmu.yaml | 4 ++--
.../devicetree/bindings/display/msm/gpu.yaml | 4 ++--
.../devicetree/bindings/display/msm/mdp4.yaml | 4 ++--
.../display/panel/ronbo,rb070d30.yaml | 2 +-
.../bindings/display/renesas,du.yaml | 4 ++--
.../display/tegra/nvidia,tegra114-mipi.yaml | 2 +-
.../display/tegra/nvidia,tegra124-sor.yaml | 12 +++++-----
.../display/tegra/nvidia,tegra186-dc.yaml | 4 ++--
.../tegra/nvidia,tegra186-dsi-padctl.yaml | 2 +-
.../display/tegra/nvidia,tegra20-dsi.yaml | 12 +++++-----
.../display/tegra/nvidia,tegra20-hdmi.yaml | 6 ++---
.../bindings/display/ti/ti,am65x-dss.yaml | 6 ++---
.../bindings/display/ti/ti,j721e-dss.yaml | 4 ++--
.../bindings/display/ti/ti,k2g-dss.yaml | 4 ++--
.../display/xylon,logicvc-display.yaml | 22 +++++++++----------
27 files changed, 66 insertions(+), 66 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index fc4873deb76f..4f6ffb8182a9 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -10,7 +10,7 @@ maintainers:
- Robin van der Gracht <robin at protonic.nl>
allOf:
- - $ref: "/schemas/input/matrix-keymap.yaml#"
+ - $ref: /schemas/input/matrix-keymap.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index 74cefdf1b843..0c85894648d8 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 6655a93b1874..0c72120acc4f 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson Display Controller
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index 4590186c4a0b..b42553ac505c 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 Analogix Semiconductor, Inc.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
index b2e8bc6da9d0..c2b369456e4e 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence MHDP8546 bridge
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
index 107dd138e6c6..cdeb67bc05f0 100644
--- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
@@ -18,7 +18,7 @@ properties:
maxItems: 1
edid-emulation:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
The EDID emulation entry to use
Value Resolution Description
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index 140927884418..e1494b5007cb 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -23,7 +23,7 @@ properties:
i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
clock-names:
- const: "ref"
+ const: ref
clocks:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
index 5e4afe9f98fb..0ece7b01790b 100644
--- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
+++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
@@ -26,7 +26,7 @@ description:
properties:
$nodename:
- const: "aux-bus"
+ const: aux-bus
panel:
$ref: panel/panel-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
index 989ab312c1f4..4ae6328cde64 100644
--- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 NXP
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: iMX8MQ Display Controller Subsystem (DCSS)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index 8afdd67d6780..b90b6d18a828 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -50,7 +50,7 @@ properties:
- const: hdmi
mediatek,syscon-hdmi:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to system configuration registers
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index e75a3efe4dac..2188d7c9b0bb 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -74,7 +74,7 @@ properties:
syscon-sfpb:
description: A phandle to mmss_sfpb syscon node (only for DSIv2).
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
qcom,dual-dsi-mode:
type: boolean
@@ -105,14 +105,14 @@ properties:
type: object
ports:
- $ref: "/schemas/graph.yaml#/properties/ports"
+ $ref: /schemas/graph.yaml#/properties/ports
description: |
Contains DSI controller input and output ports as children, each
containing one endpoint subnode.
properties:
port at 0:
- $ref: "/schemas/graph.yaml#/$defs/port-base"
+ $ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: |
Input endpoints of the controller.
@@ -128,7 +128,7 @@ properties:
enum: [ 0, 1, 2, 3 ]
port at 1:
- $ref: "/schemas/graph.yaml#/$defs/port-base"
+ $ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: |
Output endpoints of the controller.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 3ec466c3ab38..e6b00d7387ce 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -58,7 +58,7 @@ properties:
maximum: 31
qcom,phy-drive-ldo-level:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
The PHY LDO has an amplitude tuning feature to adjust the LDO output
for the HSTX drive. Use supported levels (mV) to offset the drive level
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index ab14e81cb050..029d72822d8b 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -3,8 +3,8 @@
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/msm/gmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: GMU attached to certain Adreno GPUs
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index d4191cca71fb..5dabe7b6794b 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -2,8 +2,8 @@
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/msm/gpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/msm/gpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Adreno or Snapdragon GPUs
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
index 58c13f5277b6..35204a287579 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp4.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/msm/mdp4.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/msm/mdp4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Adreno/Snapdragon MDP4 display controller
diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
index d67617f6f74a..95ce22c6787a 100644
--- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
@@ -37,7 +37,7 @@ properties:
backlight:
description: Backlight used by the panel
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
required:
- compatible
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
index d4830f52c512..c5b9e6812bce 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -76,7 +76,7 @@ properties:
unevaluatedProperties: false
renesas,cmms:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
description:
@@ -84,7 +84,7 @@ properties:
available DU channel.
renesas,vsps:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
items:
- description: phandle to VSP instance that serves the DU channel
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
index d5ca8cf86e8e..f448624dd779 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -38,7 +38,7 @@ properties:
description: The number of cells in a MIPI calibration specifier.
Should be 1. The single cell specifies a bitmask of the pads that
need to be calibrated for a given device.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
const: 1
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
index 907fb0baccae..70f0e45c71d6 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -69,12 +69,12 @@ properties:
# Tegra186 and later
nvidia,interface:
description: index of the SOR interface
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,ddc-i2c-bus:
description: phandle of an I2C controller used for DDC EDID
probing
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,hpd-gpio:
description: specifies a GPIO used for hotplug detection
@@ -82,23 +82,23 @@ properties:
nvidia,edid:
description: supplies a binary EDID blob
- $ref: "/schemas/types.yaml#/definitions/uint8-array"
+ $ref: /schemas/types.yaml#/definitions/uint8-array
nvidia,panel:
description: phandle of a display panel, required for eDP
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,xbar-cfg:
description: 5 cells containing the crossbar configuration.
Each lane of the SOR, identified by the cell's index, is
mapped via the crossbar to the pad specified by the cell's
value.
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
# optional when driving an eDP output
nvidia,dpaux:
description: phandle to a DispayPort AUX interface
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
index 265a60d79d89..ce4589466a18 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -60,13 +60,13 @@ properties:
nvidia,outputs:
description: A list of phandles of outputs that this display
controller can drive.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
nvidia,head:
description: The number of the display controller head. This
is used to setup the various types of output to receive
video data from the given head.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
index e5a6145c8c53..da75b71e8ece 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -29,7 +29,7 @@ properties:
- const: dsi
allOf:
- - $ref: "/schemas/reset/reset.yaml"
+ - $ref: /schemas/reset/reset.yaml
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
index 511cbe74e729..59e1dc0813e7 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -59,12 +59,12 @@ properties:
description: Should contain a phandle and a specifier specifying
which pads are used by this DSI output and need to be
calibrated. See nvidia,tegra114-mipi.yaml for details.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
nvidia,ddc-i2c-bus:
description: phandle of an I2C controller used for DDC EDID
probing
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,hpd-gpio:
description: specifies a GPIO used for hotplug detection
@@ -72,19 +72,19 @@ properties:
nvidia,edid:
description: supplies a binary EDID blob
- $ref: "/schemas/types.yaml#/definitions/uint8-array"
+ $ref: /schemas/types.yaml#/definitions/uint8-array
nvidia,panel:
description: phandle of a display panel
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,ganged-mode:
description: contains a phandle to a second DSI controller to
gang up with in order to support up to 8 data lanes
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- - $ref: "../dsi-controller.yaml#"
+ - $ref: ../dsi-controller.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
index f65e59cfffa7..f77197e4869f 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -68,7 +68,7 @@ properties:
nvidia,ddc-i2c-bus:
description: phandle of an I2C controller used for DDC EDID
probing
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,hpd-gpio:
description: specifies a GPIO used for hotplug detection
@@ -76,11 +76,11 @@ properties:
nvidia,edid:
description: supplies a binary EDID blob
- $ref: "/schemas/types.yaml#/definitions/uint8-array"
+ $ref: /schemas/types.yaml#/definitions/uint8-array
nvidia,panel:
description: phandle of a display panel
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
"#sound-dai-cells":
const: 0
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index 5c7d2cbc4aac..b6b402f16161 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments AM65x Display Subsystem
@@ -88,7 +88,7 @@ properties:
The DSS DPI output port node from video port 2
ti,am65x-oldi-io-ctrl:
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
phandle to syscon device node mapping OLDI IO_CTRL registers.
The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
index 2986f9acc9f0..fad7cba58d39 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments J721E Display Subsystem
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
index 7ce7bbad5780..96b1439f88e3 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments K2G Display Subsystem
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
index fc02c5d50ce4..76b804b7c880 100644
--- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
+++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
@@ -2,8 +2,8 @@
# Copyright 2019 Bootlin
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xylon LogiCVC display controller
@@ -89,25 +89,25 @@ properties:
description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
xylon,display-depth:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Display output depth (C_PIXEL_DATA_WIDTH).
xylon,row-stride:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
xylon,dithering:
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
description: Dithering module is enabled (C_XCOLOR)
xylon,background-layer:
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
description: |
The last layer is used to display a black background (C_USE_BACKGROUND).
The layer must still be registered.
xylon,layers-configurable:
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
description: |
Configuration of layers' size, position and offset is enabled
(C_USE_SIZE_POSITION).
@@ -131,7 +131,7 @@ properties:
maxItems: 1
xylon,layer-depth:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Layer depth (C_LAYER_X_DATA_WIDTH).
xylon,layer-colorspace:
@@ -151,19 +151,19 @@ properties:
description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
xylon,layer-base-offset:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Offset in number of lines (C_LAYER_X_OFFSET) starting from the
video RAM base (C_VMEM_BASEADDR), only for version 3.
xylon,layer-buffer-offset:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
layer base offset for the second buffer used in double-buffering.
xylon,layer-primary:
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
description: |
Layer should be registered as a primary plane (exactly one is
required).
--
2.39.2
More information about the Linux-mediatek
mailing list