[PATCH 05/20] pinctrl: ralink: move to mediatek as mtmips

Arınç ÜNAL arinc.unal at arinc9.com
Mon Mar 6 07:05:12 PST 2023


On 6.03.2023 17:07, Sergio Paracuellos wrote:
> On Fri, Mar 3, 2023 at 3:18 PM Arınç ÜNAL <arinc.unal at arinc9.com> wrote:
>>
>> Heyo,
>>
>> On 3.03.2023 13:57, Sergio Paracuellos wrote:
>>> Hi Arınç,
>>>
>>> On Fri, Mar 3, 2023 at 9:16 AM Arınç ÜNAL <arinc.unal at arinc9.com> wrote:
>>>>
>>>> Hey Sergio,
>>>>
>>>> On 3.03.2023 09:34, Sergio Paracuellos wrote:
>>>>> On Fri, Mar 3, 2023 at 7:17 AM Sergio Paracuellos
>>>>> <sergio.paracuellos at gmail.com> wrote:
>>>>>>
>>>>>>     Hi Arınç,
>>>>>>
>>>>>> On Fri, Mar 3, 2023 at 1:30 AM <arinc9.unal at gmail.com> wrote:
>>>>>>>
>>>>>>> From: Arınç ÜNAL <arinc.unal at arinc9.com>
>>>>>>>
>>>>>>> This platform from Ralink was acquired by MediaTek in 2011. Then, MediaTek
>>>>>>> introduced new SoCs which utilise this platform. Move the driver to
>>>>>>> mediatek pinctrl directory. Rename the ralink core driver to mtmips.
>>>>>>>
>>>>>>> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
>>>>>>> ---
>>>>>>>     drivers/pinctrl/Kconfig                       |  1 -
>>>>>>>     drivers/pinctrl/Makefile                      |  1 -
>>>>>>>     drivers/pinctrl/mediatek/Kconfig              | 51 ++++++++++-
>>>>>>>     drivers/pinctrl/mediatek/Makefile             | 63 +++++++------
>>>>>>>     .../{ralink => mediatek}/pinctrl-mt7620.c     | 34 +++----
>>>>>>>     .../{ralink => mediatek}/pinctrl-mt7621.c     | 30 +++----
>>>>>>>     .../{ralink => mediatek}/pinctrl-mt76x8.c     | 60 ++++++-------
>>>>>>>     .../pinctrl-mtmips.c}                         | 90 +++++++++----------
>>>>>>>     .../pinctrl-mtmips.h}                         | 16 ++--
>>>>>>>     .../{ralink => mediatek}/pinctrl-rt2880.c     | 20 ++---
>>>>>>>     .../{ralink => mediatek}/pinctrl-rt305x.c     | 44 ++++-----
>>>>>>>     .../{ralink => mediatek}/pinctrl-rt3883.c     | 28 +++---
>>>>>>>     drivers/pinctrl/ralink/Kconfig                | 40 ---------
>>>>>>>     drivers/pinctrl/ralink/Makefile               |  9 --
>>>>>>>     14 files changed, 246 insertions(+), 241 deletions(-)
>>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt7620.c (81%)
>>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt7621.c (80%)
>>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt76x8.c (81%)
>>>>>>>     rename drivers/pinctrl/{ralink/pinctrl-ralink.c => mediatek/pinctrl-mtmips.c} (74%)
>>>>>>>     rename drivers/pinctrl/{ralink/pinctrl-ralink.h => mediatek/pinctrl-mtmips.h} (75%)
>>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt2880.c (71%)
>>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt305x.c (75%)
>>>>>>>     rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt3883.c (80%)
>>>>>>>     delete mode 100644 drivers/pinctrl/ralink/Kconfig
>>>>>>>     delete mode 100644 drivers/pinctrl/ralink/Makefile
>>>>>>>
>>>>>>> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
>>>>>>> index dcb53c4a9584..8a6012770640 100644
>>>>>>> --- a/drivers/pinctrl/Kconfig
>>>>>>> +++ b/drivers/pinctrl/Kconfig
>>>>>>> @@ -537,7 +537,6 @@ source "drivers/pinctrl/nomadik/Kconfig"
>>>>>>>     source "drivers/pinctrl/nuvoton/Kconfig"
>>>>>>>     source "drivers/pinctrl/pxa/Kconfig"
>>>>>>>     source "drivers/pinctrl/qcom/Kconfig"
>>>>>>> -source "drivers/pinctrl/ralink/Kconfig"
>>>>>>>     source "drivers/pinctrl/renesas/Kconfig"
>>>>>>>     source "drivers/pinctrl/samsung/Kconfig"
>>>>>>>     source "drivers/pinctrl/spear/Kconfig"
>>>>>>> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
>>>>>>> index d5939840bb2a..ada6ed1d4e91 100644
>>>>>>> --- a/drivers/pinctrl/Makefile
>>>>>>> +++ b/drivers/pinctrl/Makefile
>>>>>>> @@ -66,7 +66,6 @@ obj-y                         += nomadik/
>>>>>>>     obj-y                          += nuvoton/
>>>>>>>     obj-$(CONFIG_PINCTRL_PXA)      += pxa/
>>>>>>>     obj-$(CONFIG_ARCH_QCOM)                += qcom/
>>>>>>> -obj-$(CONFIG_PINCTRL_RALINK)   += ralink/
>>>>>>>     obj-$(CONFIG_PINCTRL_RENESAS)  += renesas/
>>>>>>>     obj-$(CONFIG_PINCTRL_SAMSUNG)  += samsung/
>>>>>>>     obj-$(CONFIG_PINCTRL_SPEAR)    += spear/
>>>>>>> diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
>>>>>>> index a71874fed3d6..2eeb55010563 100644
>>>>>>> --- a/drivers/pinctrl/mediatek/Kconfig
>>>>>>> +++ b/drivers/pinctrl/mediatek/Kconfig
>>>>>>> @@ -1,6 +1,6 @@
>>>>>>>     # SPDX-License-Identifier: GPL-2.0-only
>>>>>>>     menu "MediaTek pinctrl drivers"
>>>>>>> -       depends on ARCH_MEDIATEK || COMPILE_TEST
>>>>>>> +       depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST
>>>>>>>
>>>>>>>     config EINT_MTK
>>>>>>>            tristate "MediaTek External Interrupt Support"
>>>>>>> @@ -22,6 +22,12 @@ config PINCTRL_MTK
>>>>>>>     config PINCTRL_MTK_V2
>>>>>>>            tristate
>>>>>>>
>>>>>>> +config PINCTRL_MTK_MTMIPS
>>>>>>> +       bool
>>>>>>> +       depends on RALINK
>>>>>>> +       select PINMUX
>>>>>>> +       select GENERIC_PINCONF
>>>>>>> +
>>>>>>>     config PINCTRL_MTK_MOORE
>>>>>>>            bool
>>>>>>>            depends on OF
>>>>>>> @@ -43,6 +49,49 @@ config PINCTRL_MTK_PARIS
>>>>>>>            select OF_GPIO
>>>>>>>            select PINCTRL_MTK_V2
>>>>>>>
>>>>>>> +# For MIPS SoCs
>>>>>>> +config PINCTRL_MT7620
>>>>>>> +       bool "MediaTek MT7620 pin control"
>>>>>>> +       depends on SOC_MT7620 || COMPILE_TEST
>>>>>>> +       depends on RALINK
>>>>>>> +       default SOC_MT7620
>>>>>>> +       select PINCTRL_MTK_MTMIPS
>>>>>>> +
>>>>>>> +config PINCTRL_MT7621
>>>>>>> +       bool "MediaTek MT7621 pin control"
>>>>>>> +       depends on SOC_MT7621 || COMPILE_TEST
>>>>>>> +       depends on RALINK
>>>>>>> +       default SOC_MT7621
>>>>>>> +       select PINCTRL_MTK_MTMIPS
>>>>>>> +
>>>>>>> +config PINCTRL_MT76X8
>>>>>>> +       bool "MediaTek MT76X8 pin control"
>>>>>>> +       depends on SOC_MT7620 || COMPILE_TEST
>>>>>>> +       depends on RALINK
>>>>>>> +       default SOC_MT7620
>>>>>>> +       select PINCTRL_MTK_MTMIPS
>>>>>>> +
>>>>>>> +config PINCTRL_RT2880
>>>>>>> +       bool "Ralink RT2880 pin control"
>>>>>>> +       depends on SOC_RT288X || COMPILE_TEST
>>>>>>> +       depends on RALINK
>>>>>>> +       default SOC_RT288X
>>>>>>> +       select PINCTRL_MTK_MTMIPS
>>>>>>> +
>>>>>>> +config PINCTRL_RT305X
>>>>>>> +       bool "Ralink RT305X pin control"
>>>>>>> +       depends on SOC_RT305X || COMPILE_TEST
>>>>>>> +       depends on RALINK
>>>>>>> +       default SOC_RT305X
>>>>>>> +       select PINCTRL_MTK_MTMIPS
>>>>>>> +
>>>>>>> +config PINCTRL_RT3883
>>>>>>> +       bool "Ralink RT3883 pin control"
>>>>>>> +       depends on SOC_RT3883 || COMPILE_TEST
>>>>>>> +       depends on RALINK
>>>>>>> +       default SOC_RT3883
>>>>>>> +       select PINCTRL_MTK_MTMIPS
>>>>>>> +
>>>>>>
>>>>>> I am not a Kconfig expert at all but...
>>>>>>
>>>>>> Should not all of these be depends on SOC_XXX || (COMPILE_TEST &&
>>>>>> RALINK) and avoid the " depends on RALINK" next line in all of them?
>>>>
>>>> This seems to do the same thing but I'm following the "either change
>>>> them all or fit into the crowd" ideology.
>>>>
>>>>>>
>>>>>> Just asking since we have yet arch read and write register operations
>>>>>> in pinctrl common ralink code. Having in this way, when we address
>>>>>> this arch thing  in the next series just removing the "&& RALINK" part
>>>>>> makes the review pretty obvious.
>>>>
>>>> You'd have to change RALINK with OF since we're still depending on that.
>>>> RALINK selects OF by default so it's currently a hidden dependency.
>>>>
>>>>>>
>>>>>> Other than that, changes look good to me.
>>>>>
>>>>> I think "depends on SOC_XXX || (COMPILE_TEST && MIPS)" would work also
>>>>> and might be more accurate for compile testing targets.
>>>
>>> Are you sure? SOC_XXX here is already being enabled only if RALINK is
>>> already enabled, right? [0]
>>
>> I'm not sure who's your reply to, or what it's about here.
> 
> Bad insertion between lines, sorry :). I was just trying to explain to
> you that SOC_RTXX ralink stuff is only available when RALINK is
> already selected.

Makes sense. However, I believe what I said below is still true. This 
option will be available to compile if a Ralink SoC (and therefore 
RALINK) is enabled, OR, COMPILE_TEST and MIPS is enabled. The latter 
will fail to compile if the enabled MIPS platform is not RALINK.

> 
>>
>>>
>>>>
>>>> This is not OK in both cases. If the driver is dependent on Ralink
>>>> architecture code, choosing any other MIPS platform will make the driver
>>>> available to compile, which will fail.
>>>
>>> SOC_XXX is already dependent on RALINK for real uses but the driver is
>>> going to be selected for other MIPS platforms only for COMPILE_TEST
>>> targets. Ideally drivers should be arch agnostic so can be selected
>>> for any single arch build. Now we have arch dependent read and write
>>> calls in the code, so you need the right headers to be properly found
>>> to be able to compile testing. I think MIPS is enough dependency here
>>> to properly find them. But if not, this should be (COMPILE_TEST &&
>>> RALINK)
>>
>> I expect below to work without requiring the MIPS option.
>>
>> ifeq ($(CONFIG_COMPILE_TEST),y)
>> CFLAGS_pinctrl-mtmips.o         += -I$(srctree)/arch/mips/include
>> endif
> 
> Yes, this will work but won't be necessary at all when we get rid of
> ralink arch dependent code in the next series.

Oh, you plan to completely get rid of it, including headers. That's better!

However, rt305x_pinctrl_probe() on pinctrl-rt305x.c needs them to find 
out the SoC to match the pinmux data. Sure, splitting the driver further 
will work but I'm wondering if you've got something else in mind to 
address this.

Arınç



More information about the Linux-mediatek mailing list