[PATCH 05/20] pinctrl: ralink: move to mediatek as mtmips
Arınç ÜNAL
arinc.unal at arinc9.com
Fri Mar 3 06:17:39 PST 2023
Heyo,
On 3.03.2023 13:57, Sergio Paracuellos wrote:
> Hi Arınç,
>
> On Fri, Mar 3, 2023 at 9:16 AM Arınç ÜNAL <arinc.unal at arinc9.com> wrote:
>>
>> Hey Sergio,
>>
>> On 3.03.2023 09:34, Sergio Paracuellos wrote:
>>> On Fri, Mar 3, 2023 at 7:17 AM Sergio Paracuellos
>>> <sergio.paracuellos at gmail.com> wrote:
>>>>
>>>> Hi Arınç,
>>>>
>>>> On Fri, Mar 3, 2023 at 1:30 AM <arinc9.unal at gmail.com> wrote:
>>>>>
>>>>> From: Arınç ÜNAL <arinc.unal at arinc9.com>
>>>>>
>>>>> This platform from Ralink was acquired by MediaTek in 2011. Then, MediaTek
>>>>> introduced new SoCs which utilise this platform. Move the driver to
>>>>> mediatek pinctrl directory. Rename the ralink core driver to mtmips.
>>>>>
>>>>> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
>>>>> ---
>>>>> drivers/pinctrl/Kconfig | 1 -
>>>>> drivers/pinctrl/Makefile | 1 -
>>>>> drivers/pinctrl/mediatek/Kconfig | 51 ++++++++++-
>>>>> drivers/pinctrl/mediatek/Makefile | 63 +++++++------
>>>>> .../{ralink => mediatek}/pinctrl-mt7620.c | 34 +++----
>>>>> .../{ralink => mediatek}/pinctrl-mt7621.c | 30 +++----
>>>>> .../{ralink => mediatek}/pinctrl-mt76x8.c | 60 ++++++-------
>>>>> .../pinctrl-mtmips.c} | 90 +++++++++----------
>>>>> .../pinctrl-mtmips.h} | 16 ++--
>>>>> .../{ralink => mediatek}/pinctrl-rt2880.c | 20 ++---
>>>>> .../{ralink => mediatek}/pinctrl-rt305x.c | 44 ++++-----
>>>>> .../{ralink => mediatek}/pinctrl-rt3883.c | 28 +++---
>>>>> drivers/pinctrl/ralink/Kconfig | 40 ---------
>>>>> drivers/pinctrl/ralink/Makefile | 9 --
>>>>> 14 files changed, 246 insertions(+), 241 deletions(-)
>>>>> rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt7620.c (81%)
>>>>> rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt7621.c (80%)
>>>>> rename drivers/pinctrl/{ralink => mediatek}/pinctrl-mt76x8.c (81%)
>>>>> rename drivers/pinctrl/{ralink/pinctrl-ralink.c => mediatek/pinctrl-mtmips.c} (74%)
>>>>> rename drivers/pinctrl/{ralink/pinctrl-ralink.h => mediatek/pinctrl-mtmips.h} (75%)
>>>>> rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt2880.c (71%)
>>>>> rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt305x.c (75%)
>>>>> rename drivers/pinctrl/{ralink => mediatek}/pinctrl-rt3883.c (80%)
>>>>> delete mode 100644 drivers/pinctrl/ralink/Kconfig
>>>>> delete mode 100644 drivers/pinctrl/ralink/Makefile
>>>>>
>>>>> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
>>>>> index dcb53c4a9584..8a6012770640 100644
>>>>> --- a/drivers/pinctrl/Kconfig
>>>>> +++ b/drivers/pinctrl/Kconfig
>>>>> @@ -537,7 +537,6 @@ source "drivers/pinctrl/nomadik/Kconfig"
>>>>> source "drivers/pinctrl/nuvoton/Kconfig"
>>>>> source "drivers/pinctrl/pxa/Kconfig"
>>>>> source "drivers/pinctrl/qcom/Kconfig"
>>>>> -source "drivers/pinctrl/ralink/Kconfig"
>>>>> source "drivers/pinctrl/renesas/Kconfig"
>>>>> source "drivers/pinctrl/samsung/Kconfig"
>>>>> source "drivers/pinctrl/spear/Kconfig"
>>>>> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
>>>>> index d5939840bb2a..ada6ed1d4e91 100644
>>>>> --- a/drivers/pinctrl/Makefile
>>>>> +++ b/drivers/pinctrl/Makefile
>>>>> @@ -66,7 +66,6 @@ obj-y += nomadik/
>>>>> obj-y += nuvoton/
>>>>> obj-$(CONFIG_PINCTRL_PXA) += pxa/
>>>>> obj-$(CONFIG_ARCH_QCOM) += qcom/
>>>>> -obj-$(CONFIG_PINCTRL_RALINK) += ralink/
>>>>> obj-$(CONFIG_PINCTRL_RENESAS) += renesas/
>>>>> obj-$(CONFIG_PINCTRL_SAMSUNG) += samsung/
>>>>> obj-$(CONFIG_PINCTRL_SPEAR) += spear/
>>>>> diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
>>>>> index a71874fed3d6..2eeb55010563 100644
>>>>> --- a/drivers/pinctrl/mediatek/Kconfig
>>>>> +++ b/drivers/pinctrl/mediatek/Kconfig
>>>>> @@ -1,6 +1,6 @@
>>>>> # SPDX-License-Identifier: GPL-2.0-only
>>>>> menu "MediaTek pinctrl drivers"
>>>>> - depends on ARCH_MEDIATEK || COMPILE_TEST
>>>>> + depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST
>>>>>
>>>>> config EINT_MTK
>>>>> tristate "MediaTek External Interrupt Support"
>>>>> @@ -22,6 +22,12 @@ config PINCTRL_MTK
>>>>> config PINCTRL_MTK_V2
>>>>> tristate
>>>>>
>>>>> +config PINCTRL_MTK_MTMIPS
>>>>> + bool
>>>>> + depends on RALINK
>>>>> + select PINMUX
>>>>> + select GENERIC_PINCONF
>>>>> +
>>>>> config PINCTRL_MTK_MOORE
>>>>> bool
>>>>> depends on OF
>>>>> @@ -43,6 +49,49 @@ config PINCTRL_MTK_PARIS
>>>>> select OF_GPIO
>>>>> select PINCTRL_MTK_V2
>>>>>
>>>>> +# For MIPS SoCs
>>>>> +config PINCTRL_MT7620
>>>>> + bool "MediaTek MT7620 pin control"
>>>>> + depends on SOC_MT7620 || COMPILE_TEST
>>>>> + depends on RALINK
>>>>> + default SOC_MT7620
>>>>> + select PINCTRL_MTK_MTMIPS
>>>>> +
>>>>> +config PINCTRL_MT7621
>>>>> + bool "MediaTek MT7621 pin control"
>>>>> + depends on SOC_MT7621 || COMPILE_TEST
>>>>> + depends on RALINK
>>>>> + default SOC_MT7621
>>>>> + select PINCTRL_MTK_MTMIPS
>>>>> +
>>>>> +config PINCTRL_MT76X8
>>>>> + bool "MediaTek MT76X8 pin control"
>>>>> + depends on SOC_MT7620 || COMPILE_TEST
>>>>> + depends on RALINK
>>>>> + default SOC_MT7620
>>>>> + select PINCTRL_MTK_MTMIPS
>>>>> +
>>>>> +config PINCTRL_RT2880
>>>>> + bool "Ralink RT2880 pin control"
>>>>> + depends on SOC_RT288X || COMPILE_TEST
>>>>> + depends on RALINK
>>>>> + default SOC_RT288X
>>>>> + select PINCTRL_MTK_MTMIPS
>>>>> +
>>>>> +config PINCTRL_RT305X
>>>>> + bool "Ralink RT305X pin control"
>>>>> + depends on SOC_RT305X || COMPILE_TEST
>>>>> + depends on RALINK
>>>>> + default SOC_RT305X
>>>>> + select PINCTRL_MTK_MTMIPS
>>>>> +
>>>>> +config PINCTRL_RT3883
>>>>> + bool "Ralink RT3883 pin control"
>>>>> + depends on SOC_RT3883 || COMPILE_TEST
>>>>> + depends on RALINK
>>>>> + default SOC_RT3883
>>>>> + select PINCTRL_MTK_MTMIPS
>>>>> +
>>>>
>>>> I am not a Kconfig expert at all but...
>>>>
>>>> Should not all of these be depends on SOC_XXX || (COMPILE_TEST &&
>>>> RALINK) and avoid the " depends on RALINK" next line in all of them?
>>
>> This seems to do the same thing but I'm following the "either change
>> them all or fit into the crowd" ideology.
>>
>>>>
>>>> Just asking since we have yet arch read and write register operations
>>>> in pinctrl common ralink code. Having in this way, when we address
>>>> this arch thing in the next series just removing the "&& RALINK" part
>>>> makes the review pretty obvious.
>>
>> You'd have to change RALINK with OF since we're still depending on that.
>> RALINK selects OF by default so it's currently a hidden dependency.
>>
>>>>
>>>> Other than that, changes look good to me.
>>>
>>> I think "depends on SOC_XXX || (COMPILE_TEST && MIPS)" would work also
>>> and might be more accurate for compile testing targets.
>
> Are you sure? SOC_XXX here is already being enabled only if RALINK is
> already enabled, right? [0]
I'm not sure who's your reply to, or what it's about here.
>
>>
>> This is not OK in both cases. If the driver is dependent on Ralink
>> architecture code, choosing any other MIPS platform will make the driver
>> available to compile, which will fail.
>
> SOC_XXX is already dependent on RALINK for real uses but the driver is
> going to be selected for other MIPS platforms only for COMPILE_TEST
> targets. Ideally drivers should be arch agnostic so can be selected
> for any single arch build. Now we have arch dependent read and write
> calls in the code, so you need the right headers to be properly found
> to be able to compile testing. I think MIPS is enough dependency here
> to properly find them. But if not, this should be (COMPILE_TEST &&
> RALINK)
I expect below to work without requiring the MIPS option.
ifeq ($(CONFIG_COMPILE_TEST),y)
CFLAGS_pinctrl-mtmips.o += -I$(srctree)/arch/mips/include
endif
>
>>
>> If the driver is independent of Ralink architecture code, you're
>> limiting the driver to be compiled only when a MIPS platform is selected.
>
> So... how are you planning to allow compile testing of the driver in
> any single arch when we get rid of all the arch dependent code? If you
> make everything dependent on RALINK you cannot.
I intend to make it dependent on OF, not RALINK.
Arınç
More information about the Linux-mediatek
mailing list