[PATCH v7 2/3] Bluetooth: btmtk: introduce btmtk reset work
sean.wang at mediatek.com
sean.wang at mediatek.com
Mon Jun 26 13:41:38 PDT 2023
From: Jing Cai <jing.cai at mediatek.com>
Introduce btmtk_reset_work which can be called whenever the firmware abort,
HCI command timeout, other fatal error happen.
Co-developed-by: Chris Lu <chris.lu at mediatek.com>
Signed-off-by: Chris Lu <chris.lu at mediatek.com>
Co-developed-by: Sean Wang <sean.wang at mediatek.com>
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Signed-off-by: Jing Cai <jing.cai at mediatek.com>
---
v2, v3, v4: rebase onto the latest codebase
v5: reset the device on hdev basis and use hci_cmd_sync_queue to
schedule reset work
v6 and v7: rebase onto the latest codebase
---
drivers/bluetooth/btmtk.c | 15 ++++
drivers/bluetooth/btmtk.h | 8 +++
drivers/bluetooth/btusb.c | 145 +++++++++++++++++++-------------------
3 files changed, 97 insertions(+), 71 deletions(-)
diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 9482401d97fa..b8678b75276e 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -280,6 +280,21 @@ int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(btmtk_set_bdaddr);
+void btmtk_reset_sync(struct hci_dev *hdev)
+{
+ struct btmediatek_data *reset_work = hci_get_priv(hdev);
+ int err;
+
+ hci_dev_lock(hdev);
+
+ err = hci_cmd_sync_queue(hdev, reset_work->reset_sync, NULL, NULL);
+ if (err)
+ bt_dev_err(hdev, "failed to reset (%d)", err);
+
+ hci_dev_unlock(hdev);
+}
+EXPORT_SYMBOL_GPL(btmtk_reset_sync);
+
MODULE_AUTHOR("Sean Wang <sean.wang at mediatek.com>");
MODULE_AUTHOR("Mark Chen <mark-yw.chen at mediatek.com>");
MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION);
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index fadc1a520652..75d8e71efcd3 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -120,8 +120,11 @@ struct btmtk_hci_wmt_params {
u32 *status;
};
+typedef int (*btmtk_reset_sync_func_t)(struct hci_dev *, void *);
+
struct btmediatek_data {
u32 dev_id;
+ btmtk_reset_sync_func_t reset_sync;
};
typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
@@ -136,6 +139,8 @@ int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
wmt_cmd_sync_func_t wmt_cmd_sync);
+
+void btmtk_reset_sync(struct hci_dev *hdev);
#else
static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
@@ -156,4 +161,7 @@ static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
return -EOPNOTSUPP;
}
+static void btmtk_reset_sync(struct hci_dev *hdev)
+{
+}
#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 71b119bcff29..4ebab61c288c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3037,6 +3037,78 @@ static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
return val & MTK_BT_RST_DONE;
}
+static int btusb_mtk_reset_work(struct hci_dev *hdev, void *rst_data)
+{
+ struct btusb_data *data = hci_get_drvdata(hdev);
+ struct btmediatek_data *mediatek;
+ u32 val;
+ int err;
+
+ /* It's MediaTek specific bluetooth reset mechanism via USB */
+ if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+ bt_dev_err(hdev, "last reset failed? Not resetting again");
+ return -EBUSY;
+ }
+
+ err = usb_autopm_get_interface(data->intf);
+ if (err < 0)
+ return err;
+
+ btusb_stop_traffic(data);
+ usb_kill_anchored_urbs(&data->tx_anchor);
+ mediatek = hci_get_priv(hdev);
+
+ if (mediatek->dev_id == 0x7925) {
+ btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+ val |= (1 << 5);
+ btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+ btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+ val &= 0xFFFF00FF;
+ val |= (1 << 13);
+ btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+ btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
+ btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
+ val |= (1 << 0);
+ btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
+ btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+ btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+ btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+ btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+ msleep(100);
+ } else {
+ /* It's Device EndPoint Reset Option Register */
+ bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
+ btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
+ btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
+
+ /* Reset the bluetooth chip via USB interface. */
+ btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
+ btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+ btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+ btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+ btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+ /* MT7921 need to delay 20ms between toggle reset bit */
+ msleep(20);
+ btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
+ btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+ }
+
+ err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
+ val & MTK_BT_RST_DONE, 20000, 1000000);
+ if (err < 0)
+ bt_dev_err(hdev, "Reset timeout");
+
+ btusb_mtk_id_get(data, 0x70010200, &val);
+ if (!val)
+ bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
+
+ usb_queue_reset_device(data->intf);
+
+ clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
+
+ return err;
+}
+
static int btusb_mtk_setup(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
@@ -3076,6 +3148,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
mediatek = hci_get_priv(hdev);
mediatek->dev_id = dev_id;
+ mediatek->reset_sync = btusb_mtk_reset_work;
switch (dev_id) {
case 0x7663:
@@ -3233,76 +3306,6 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
return 0;
}
-static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
-{
- struct btusb_data *data = hci_get_drvdata(hdev);
- u32 val;
- int err;
- struct btmediatek_data *mediatek;
-
- /* It's MediaTek specific bluetooth reset mechanism via USB */
- if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
- bt_dev_err(hdev, "last reset failed? Not resetting again");
- return;
- }
-
- err = usb_autopm_get_interface(data->intf);
- if (err < 0)
- return;
-
- btusb_stop_traffic(data);
- usb_kill_anchored_urbs(&data->tx_anchor);
- mediatek = hci_get_priv(hdev);
-
- if (mediatek->dev_id == 0x7925) {
- btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
- val |= (1 << 5);
- btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
- btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
- val &= 0xFFFF00FF;
- val |= (1 << 13);
- btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
- btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
- btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
- val |= (1 << 0);
- btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
- btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
- btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
- btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
- btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
- msleep(100);
- } else {
- /* It's Device EndPoint Reset Option Register */
- bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
- btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
- btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
-
- /* Reset the bluetooth chip via USB interface. */
- btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
- btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
- btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
- btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
- btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
- /* MT7921 need to delay 20ms between toggle reset bit */
- msleep(20);
- btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
- btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
- }
-
- err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
- val & MTK_BT_RST_DONE, 20000, 1000000);
- if (err < 0)
- bt_dev_err(hdev, "Reset timeout");
-
- btusb_mtk_id_get(data, 0x70010200, &val);
- if (!val)
- bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
-
- usb_queue_reset_device(data->intf);
-
- clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
-}
-
static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
@@ -4429,7 +4432,7 @@ static int btusb_probe(struct usb_interface *intf,
hdev->setup = btusb_mtk_setup;
hdev->shutdown = btusb_mtk_shutdown;
hdev->manufacturer = 70;
- hdev->cmd_timeout = btusb_mtk_cmd_timeout;
+ hdev->cmd_timeout = btmtk_reset_sync;
hdev->set_bdaddr = btmtk_set_bdaddr;
set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
--
2.25.1
More information about the Linux-mediatek
mailing list