[PATCH v4] Bluetooth: btusb: Add support Mediatek MT7925
Paul Menzel
pmenzel at molgen.mpg.de
Tue Jun 20 02:13:30 PDT 2023
Dear Peter,
Thank you for your patch.
Am 20.06.23 um 10:27 schrieb Peter Tsao:
> This patch is added support Mediatek MT7925.
Maybe:
This patch adds support for the Mediatek MT7925.
Or in imperative mood:
Add support for the Mediatek MT7925.
Could you please add some more information to the chip. What chip is it
similar to, what is different.
> 1. The firmware location of MT7925 will set to
> /lib/firmware/mediatek/mt7925
The firmware location of MT7925 is …
> 2. Add Mediatek private data in hdev
> to record the device for handle MT7925 flow.
Sorry, I do not understand. Could you please rephrase.
> 3. Use the recoreded dev_id to condition chip reset flow.
recorded
Could you please document the name and version of the datasheet you used?
> The information in /sys/kernel/debug/usb/devices about the MT7925U
> Bluetooth device is listed as the below
>
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 27 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0e8d ProdID=7925 Rev= 1.00
> S: Manufacturer=MediaTek Inc.
> S: Product=Wireless_Device
> S: SerialNumber=000000000
> C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 5 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=8f(I) Atr=03(Int.) MxPS= 2 Ivl=125us
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
> I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
> E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
> E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
> I:* If#= 3 Alt= 0 #EPs= 9 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=86(I) Atr=03(Int.) MxPS= 2 Ivl=125us
>
> Signed-off-by: Peter Tsao <peter.tsao at mediatek.com>
> ---
> drivers/bluetooth/btmtk.c | 1 +
> drivers/bluetooth/btmtk.h | 5 +++
> drivers/bluetooth/btusb.c | 78 +++++++++++++++++++++++++++++----------
> 3 files changed, 64 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
> index 809762d64fc6..9482401d97fa 100644
> --- a/drivers/bluetooth/btmtk.c
> +++ b/drivers/bluetooth/btmtk.c
> @@ -289,3 +289,4 @@ MODULE_FIRMWARE(FIRMWARE_MT7622);
> MODULE_FIRMWARE(FIRMWARE_MT7663);
> MODULE_FIRMWARE(FIRMWARE_MT7668);
> MODULE_FIRMWARE(FIRMWARE_MT7961);
> +MODULE_FIRMWARE(FIRMWARE_MT7925);
Sort it lexicographically?
> diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
> index 2a88ea8e475e..fadc1a520652 100644
> --- a/drivers/bluetooth/btmtk.h
> +++ b/drivers/bluetooth/btmtk.h
> @@ -5,6 +5,7 @@
> #define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
> #define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
> #define FIRMWARE_MT7961 "mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
> +#define FIRMWARE_MT7925 "mediatek/mt7925/BT_RAM_CODE_MT7925_1_1_hdr.bin"
Ditto.
> #define HCI_EV_WMT 0xe4
> #define HCI_WMT_MAX_EVENT_SIZE 64
> @@ -119,6 +120,10 @@ struct btmtk_hci_wmt_params {
> u32 *status;
> };
>
> +struct btmediatek_data {
> + u32 dev_id;
> +};
> +
> typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
> struct btmtk_hci_wmt_params *);
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 8776e0f93c73..1328709c0f4f 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -2640,6 +2640,9 @@ static int btusb_recv_event_realtek(struct hci_dev *hdev, struct sk_buff *skb)
> #define MTK_BT_RST_DONE 0x00000100
> #define MTK_BT_RESET_WAIT_MS 100
> #define MTK_BT_RESET_NUM_TRIES 10
> +#define MTK_BT_RESET_REG_CONNV3 0x70028610
> +#define MTK_BT_READ_DEV_ID 0x70010200
> +
>
> static void btusb_mtk_wmt_recv(struct urb *urb)
> {
> @@ -3020,10 +3023,11 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
> struct sk_buff *skb;
> const char *fwname;
> int err, status;
> - u32 dev_id;
> + u32 dev_id = 0;
Why?
> char fw_bin_name[64];
> u32 fw_version = 0;
> u8 param;
> + struct btmediatek_data *mediatek;
>
> calltime = ktime_get();
>
> @@ -3033,7 +3037,7 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
> return err;
> }
>
> - if (!dev_id) {
> + if (!dev_id || dev_id != 0x7663) {
Define a macro for the id?
> err = btusb_mtk_id_get(data, 0x70010200, &dev_id);
> if (err < 0) {
> bt_dev_err(hdev, "Failed to get device id (%d)", err);
> @@ -3046,6 +3050,9 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
> }
> }
>
> + mediatek = hci_get_priv(hdev);
> + mediatek->dev_id = dev_id;
> +
> switch (dev_id) {
> case 0x7663:
> fwname = FIRMWARE_MT7663;
> @@ -3055,9 +3062,16 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
> break;
> case 0x7922:
> case 0x7961:
> - snprintf(fw_bin_name, sizeof(fw_bin_name),
> - "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
> - dev_id & 0xffff, (fw_version & 0xff) + 1);
> + case 0x7925:
Sort it?
> + if (dev_id == 0x7925)
> + snprintf(fw_bin_name, sizeof(fw_bin_name),
> + "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
> + dev_id & 0xffff, dev_id & 0xffff, (fw_version & 0xff) + 1);
So this has a new subdirectory (mt%04x)? Why is that needed?
> + else
> + snprintf(fw_bin_name, sizeof(fw_bin_name),
> + "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
> + dev_id & 0xffff, (fw_version & 0xff) + 1);
> +
> err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
> btusb_mtk_hci_wmt_sync);
> if (err < 0) {
> @@ -3200,6 +3214,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
> struct btusb_data *data = hci_get_drvdata(hdev);
> u32 val;
> int err, retry = 0;
> + struct btmediatek_data *mediatek;
>
> /* It's MediaTek specific bluetooth reset mechanism via USB */
> if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
> @@ -3213,22 +3228,42 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
>
> btusb_stop_traffic(data);
> usb_kill_anchored_urbs(&data->tx_anchor);
> + mediatek = hci_get_priv(hdev);
> +
> + if (mediatek->dev_id == 0x7925) {
> + btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> + val |= (1 << 5);
> + btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> + btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> + val &= 0xFFFF00FF;
> + val |= (1 << 13);
> + btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> + btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
> + btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
> + val |= (1 << 0);
> + btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
> + btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> + btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> + btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> + btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> + msleep(100);
A delay of 100 ms is quite excessive. Please add comment to the
datasheet section requiring this.
> + } else {
> + /* It's Device EndPoint Reset Option Register */
> + bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
> + btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
> + btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
>
> - /* It's Device EndPoint Reset Option Register */
> - bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
> - btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
> - btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
> -
> - /* Reset the bluetooth chip via USB interface. */
> - btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
> - btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> - btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> - btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> - btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> - /* MT7921 need to delay 20ms between toggle reset bit */
> - msleep(20);
> - btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
> - btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
> + /* Reset the bluetooth chip via USB interface. */
> + btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
> + btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
> + btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
> + btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
> + btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
> + /* MT7921 need to delay 20ms between toggle reset bit */
> + msleep(20);
> + btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
> + btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
> + }
I’d factor both branches into two new functions.
>
> /* Poll the register until reset is completed */
> do {
> @@ -4269,6 +4304,9 @@ static int btusb_probe(struct usb_interface *intf,
> priv_size += sizeof(struct btrealtek_data);
>
> data->recv_event = btusb_recv_event_realtek;
> + } else if (id->driver_info & BTUSB_MEDIATEK) {
> + /* Allocate extra space for Mediatek device */
> + priv_size += sizeof(struct btmediatek_data);
This affects all Mediatek devices, right? Please make it a separate
commit with a dedicated commit message.
> }
>
> data->recv_acl = hci_recv_frame;
Kind regards,
Paul
More information about the Linux-mediatek
mailing list