[PATCH net v5 1/6] net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAP

[Vladimir Oltean]

On Fri, Jun 16, 2023 at 05:53:22AM +0300, arinc9.unal at gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal at arinc9.com>
> 
> MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU
> frames (further restricted by PCR_MATRIX).
> 
> Currently the driver sets the first CPU port as the single port in this bit
> mask, which works fine regardless of whether the device tree defines port
> 5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's
> logic of picking the first CPU port as the CPU port that all user ports are
> affine to, by default.
> 
> An upcoming change would like to influence DSA's selection of the default
> CPU port to no longer be the first one, and in that case, this logic needs
> adaptation.
> 
> Since there is no observed leakage or duplication of frames if all CPU
> ports are defined in this bit mask, simply include them all.
> 
> Suggested-by: Russell King (Oracle) <linux at armlinux.org.uk>
> Suggested-by: Vladimir Oltean <olteanv at gmail.com>
> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv at gmail.com>