[PATCH 1/3] dt-bindings: extcon-usb-gpio: convert to DT schema format

Rob Herring robh at kernel.org
Wed Jun 14 16:15:38 PDT 2023


On Mon, Jun 12, 2023 at 10:29:16AM +0200, Krzysztof Kozlowski wrote:
> On 08/06/2023 10:11, Alexander Stein wrote:
> > Convert the binding to DT schema format. Change the GPIO properties to new
> > naming convention using -gpios as well.
> > 
> > Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> > ---
> >  .../bindings/extcon/extcon-usb-gpio.txt       | 21 --------
> >  .../bindings/extcon/extcon-usb-gpio.yaml      | 52 +++++++++++++++++++
> >  2 files changed, 52 insertions(+), 21 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> >  create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> > deleted file mode 100644
> > index dfc14f71e81fb..0000000000000
> > --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> > +++ /dev/null
> > @@ -1,21 +0,0 @@
> > -USB GPIO Extcon device
> > -
> > -This is a virtual device used to generate USB cable states from the USB ID pin
> > -connected to a GPIO pin.
> > -
> > -Required properties:
> > -- compatible: Should be "linux,extcon-usb-gpio"
> > -
> > -Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
> > -- id-gpio: gpio for USB ID pin. See gpio binding.
> > -- vbus-gpio: gpio for USB VBUS pin.
> > -
> > -Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
> > -	extcon_usb1 {
> > -		compatible = "linux,extcon-usb-gpio";
> > -		id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> > -	}
> > -
> > -	&omap_dwc3_1 {
> > -		extcon = <&extcon_usb1>;
> > -	};
> > diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
> > new file mode 100644
> > index 0000000000000..3a71d848dc7a8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
> > @@ -0,0 +1,52 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/extcon/extcon-usb-gpio.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: USB GPIO Extcon device
> > +
> > +maintainers:
> > +  - Alexander Stein <alexander.stein at ew.tq-group.com>
> > +
> > +description: |

Don't need '|'

> > +  This is a virtual device used to generate USB cable states from the
> > +  USB ID pin connected to a GPIO pin.

Please add 'deprecated: true' here. New designs should use a USB 
connector node binding.

> > +
> > +properties:
> > +  compatible:
> > +    const: linux,extcon-usb-gpio
> > +
> > +  id-gpios:
> > +    description: An input gpio for USB ID pin.
> > +    maxItems: 1
> > +
> > +  vbus-gpios:
> > +    description: An input gpio for USB VBus pin, used to detect presence of
> > +      VBUS 5V.
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +
> > +anyOf:
> 
> oneOf instead

anyOf is correct. Both can be present.

> 
> > +  - required:
> > +      - id-gpios
> > +  - required:
> > +      - vbus-gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    extcon_usb1 {
> 
> No underscores, generic node names, so just "extcon-usb"
> 
> > +      compatible = "linux,extcon-usb-gpio";
> > +      id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> > +      vbus-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
> > +    };
> > +
> > +    usb-controller {
> > +      extcon = <&extcon_usb1>;
> > +    };
> 
> Drop controller, no need to add consumers in a provider's binding.
> 
> Best regards,
> Krzysztof
> 



More information about the Linux-mediatek mailing list