[PATCH RFC net-next 15/15] net: macb: update PCS driver to use neg_mode

Russell King (Oracle) rmk+kernel at armlinux.org.uk
Tue Jun 13 07:38:44 PDT 2023


Update macb's embedded PCS drivers to use neg_mode, even though it
makes no use of it or the "mode" argument. This makes the driver
consistent with converted drivers.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/ethernet/cadence/macb_main.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 50a4b04315e9..e2640c81fe8c 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -563,7 +563,7 @@ static void macb_set_tx_clk(struct macb *bp, int speed)
 		netdev_err(bp->dev, "adjusting tx_clk failed.\n");
 }
 
-static void macb_usx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+static void macb_usx_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
 				 phy_interface_t interface, int speed,
 				 int duplex)
 {
@@ -596,7 +596,7 @@ static void macb_usx_pcs_get_state(struct phylink_pcs *pcs,
 }
 
 static int macb_usx_pcs_config(struct phylink_pcs *pcs,
-			       unsigned int mode,
+			       unsigned int neg_mode,
 			       phy_interface_t interface,
 			       const unsigned long *advertising,
 			       bool permit_pause_to_mac)
@@ -621,7 +621,7 @@ static void macb_pcs_an_restart(struct phylink_pcs *pcs)
 }
 
 static int macb_pcs_config(struct phylink_pcs *pcs,
-			   unsigned int mode,
+			   unsigned int neg_mode,
 			   phy_interface_t interface,
 			   const unsigned long *advertising,
 			   bool permit_pause_to_mac)
@@ -862,7 +862,9 @@ static int macb_mii_probe(struct net_device *dev)
 	struct macb *bp = netdev_priv(dev);
 
 	bp->phylink_sgmii_pcs.ops = &macb_phylink_pcs_ops;
+	bp->phylink_sgmii_pcs.neg_mode = true;
 	bp->phylink_usx_pcs.ops = &macb_phylink_usx_pcs_ops;
+	bp->phylink_usx_pcs.neg_mode = true;
 
 	bp->phylink_config.dev = &dev->dev;
 	bp->phylink_config.type = PHYLINK_NETDEV;
-- 
2.30.2




More information about the Linux-mediatek mailing list