[PATCH v4 1/8] dt-bindings: display: mediatek: add MT8195 hdmi bindings

Chun-Kuang Hu chunkuang.hu at kernel.org
Fri Jun 9 21:16:07 PDT 2023


Hi, Guillaume:

Guillaume Ranquet <granquet at baylibre.com> 於 2023年6月9日 週五 下午11:50寫道:
>
> On Thu, 08 Jun 2023 23:05, Rob Herring <robh at kernel.org> wrote:
> >On Mon, May 29, 2023 at 04:30:58PM +0200, Guillaume Ranquet wrote:
> >> Add mt8195 SoC bindings for hdmi and hdmi-ddc
> >>
> >> On mt8195 the ddc i2c controller is part of the hdmi IP block and thus has no
> >> specific register range, power domain or interrupt, making it simpler
> >> than the legacy "mediatek,hdmi-ddc" binding.
> >>
> >> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> >> ---
> >>  .../bindings/display/mediatek/mediatek,hdmi.yaml   | 59 ++++++++++++++++++----
> >>  .../display/mediatek/mediatek,mt8195-hdmi-ddc.yaml | 45 +++++++++++++++++
> >>  2 files changed, 93 insertions(+), 11 deletions(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> >> index b90b6d18a828..4f62e6b94048 100644
> >> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> >> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> >> @@ -21,6 +21,7 @@ properties:
> >>        - mediatek,mt7623-hdmi
> >>        - mediatek,mt8167-hdmi
> >>        - mediatek,mt8173-hdmi
> >> +      - mediatek,mt8195-hdmi
> >>
> >>    reg:
> >>      maxItems: 1
> >> @@ -29,18 +30,10 @@ properties:
> >>      maxItems: 1
> >>
> >>    clocks:
> >> -    items:
> >> -      - description: Pixel Clock
> >> -      - description: HDMI PLL
> >> -      - description: Bit Clock
> >> -      - description: S/PDIF Clock
> >> +    maxItems: 4
> >>
> >>    clock-names:
> >> -    items:
> >> -      - const: pixel
> >> -      - const: pll
> >> -      - const: bclk
> >> -      - const: spdif
> >> +    maxItems: 4
> >>
> >>    phys:
> >>      maxItems: 1
> >> @@ -58,6 +51,9 @@ properties:
> >>      description: |
> >>        phandle link and register offset to the system configuration registers.
> >>
> >> +  power-domains:
> >> +    maxItems: 1
> >> +
> >>    ports:
> >>      $ref: /schemas/graph.yaml#/properties/ports
> >>
> >> @@ -86,9 +82,50 @@ required:
> >>    - clock-names
> >>    - phys
> >>    - phy-names
> >> -  - mediatek,syscon-hdmi
> >>    - ports
> >>
> >> +allOf:
> >> +  - if:
> >> +      properties:
> >> +        compatible:
> >> +          contains:
> >> +            const: mediatek,mt8195-hdmi
> >> +    then:
> >> +      properties:
> >> +        clocks:
> >> +          items:
> >> +            - description: APB
> >> +            - description: HDCP
> >> +            - description: HDCP 24M
> >> +            - description: Split HDMI
> >> +        clock-names:
> >> +          items:
> >> +            - const: hdmi_apb_sel
> >> +            - const: hdcp_sel
> >> +            - const: hdcp24_sel
> >> +            - const: split_hdmi
> >> +
> >> +      required:
> >> +        - power-domains
> >> +    else:
> >> +      properties:
> >> +        clocks:
> >> +          items:
> >> +            - description: Pixel Clock
> >> +            - description: HDMI PLL
> >> +            - description: Bit Clock
> >> +            - description: S/PDIF Clock
> >> +
> >> +        clock-names:
> >> +          items:
> >> +            - const: pixel
> >> +            - const: pll
> >> +            - const: bclk
> >> +            - const: spdif
> >
> >I don't understand how the same h/w block can have completely different
> >clocks. If not the same h/w or evolution of the same h/w, then do a
> >separate schema.
> >
>
> Hi Rob,
>
> I'm not entirely sure what's the best approach here.
> The IPs are different enough to warrant a separate schema IMHO.
> Though CK asked me to merge both IPs together (for both schema and code).
>
> CK might want to chime in and advocate his point of view?

For all the mediatek hdmi device, input mediatek internal video
signal, and output hdmi signal, so I'm curious about how mt8195-hdmi
device is different with other mediatek hdmi device. I think pixel
clock is an important clock which is related to resolution and fps. So
I think every hdmi device should have a clock which related to pixel
clock. I does not find it in mt8195 device. Is one of the clock the
parent clock of pixel clock or one of the clock is pixel clock but you
give it another naming? Please conduct with mediatek stuff and give us
these information, so we have information to judge mt8195-hdmi is
different with other mediatek hdmi device or similar to. For other
three clocks, I still need these information.

Regards,
Chun-Kuang.

>
> >> +
> >> +      required:
> >> +        - mediatek,syscon-hdmi
> >> +
> >>  additionalProperties: false
> >>
> >>  examples:
> >> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
> >> new file mode 100644
> >> index 000000000000..84c096835b47
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
> >> @@ -0,0 +1,45 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Mediatek HDMI DDC for mt8195
> >> +
> >> +maintainers:
> >> +  - CK Hu <ck.hu at mediatek.com>
> >> +  - Jitao shi <jitao.shi at mediatek.com>
> >> +
> >> +description: |
> >> +  The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
> >> +
> >> +properties:
> >> +  compatible:
> >> +    enum:
> >> +      - mediatek,mt8195-hdmi-ddc
> >> +
> >> +  clocks:
> >> +    maxItems: 1
> >> +
> >> +  mediatek,hdmi:
> >> +    $ref: /schemas/types.yaml#/definitions/phandle
> >> +    description:
> >> +      A phandle to the mt8195 hdmi controller
> >> +
> >> +required:
> >> +  - compatible
> >> +  - clocks
> >> +
> >> +additionalProperties: false
> >> +
> >> +examples:
> >> +  - |
> >> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> >> +    #include <dt-bindings/interrupt-controller/irq.h>
> >> +    hdmiddc0: i2c {
> >> +      compatible = "mediatek,mt8195-hdmi-ddc";
> >> +      mediatek,hdmi = <&hdmi0>;
> >> +      clocks = <&clk26m>;
> >
> >How does one access this h/w device? There is nothing described to
> >access it.
> >
>
> The device is embedded into the HDMI block and thus uses the
> mediatek,hdmi phandle to access its sets of registers in the middle of
> the mediatek,hdmi register range.
>
> Hope this clarifies things,
> Guillaume.
>
> >Rob



More information about the Linux-mediatek mailing list