[PATCH v2 2/2] arm64: dts: mt8173: Update thermal node
matthias.bgg at kernel.org
matthias.bgg at kernel.org
Thu Jun 1 06:44:25 PDT 2023
From: Matthias Brugger <matthias.bgg at gmail.com>
Following the binding description, update to use
thermal-sensor-cells = 1
While at it also fix the node name of the CPU critical trip point.
Signed-off-by: Matthias Brugger <matthias.bgg at gmail.com>
---
Changes in v2:
- fix node name of CPU critical trip point
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c47d7d900f28..d760776e3daf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -270,7 +270,7 @@ cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
- thermal-sensors = <&thermal>;
+ thermal-sensors = <&thermal 0>;
sustainable-power = <1500>; /* milliwatts */
trips {
@@ -286,7 +286,7 @@ target: trip-point1 {
type = "passive";
};
- cpu_crit: cpu_crit0 {
+ cpu_crit: cpu-crit0 {
temperature = <115000>;
hysteresis = <2000>;
type = "critical";
@@ -766,7 +766,7 @@ spi: spi at 1100a000 {
};
thermal: thermal at 1100b000 {
- #thermal-sensor-cells = <0>;
+ #thermal-sensor-cells = <1>;
compatible = "mediatek,mt8173-thermal";
reg = <0 0x1100b000 0 0x1000>;
interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
--
2.40.1
More information about the Linux-mediatek
mailing list