[PATCH RESEND v6 09/11] drm/mediatek: gamma: Add support for 12-bit LUT and MT8195
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Thu Jul 27 06:06:03 PDT 2023
Il 27/07/23 13:03, Alexandre Mergnat ha scritto:
> Hi Angelo !
>
> On 27/07/2023 11:46, AngeloGioacchino Del Regno wrote:
>> Add support for 12-bit gamma lookup tables and introduce the first
>> user for it: MT8195.
>> While at it, also reorder the variables in mtk_gamma_set_common()
>> and rename `lut_base` to `lut0_base` to improve readability.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>> Reviewed-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
>> ---
>> drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 61 ++++++++++++++++++-----
>> 1 file changed, 48 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
>> b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
>> index f1a0b18b6c1a..e0e2d2bdbf59 100644
>> --- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
>> +++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
>> @@ -27,12 +27,20 @@
>> #define DISP_GAMMA_SIZE_VSIZE GENMASK(12, 0)
>> #define DISP_GAMMA_BANK 0x0100
>> #define DISP_GAMMA_BANK_BANK GENMASK(1, 0)
>> +#define DISP_GAMMA_BANK_DATA_MODE BIT(2)
>> #define DISP_GAMMA_LUT 0x0700
>> +#define DISP_GAMMA_LUT1 0x0b00
>
> Is this offset generic to all MTK SoC which support this driver ?
>
>> +/* For 10 bit LUT layout, R/G/B are in the same register */
>> #define DISP_GAMMA_LUT_10BIT_R GENMASK(29, 20)
>> #define DISP_GAMMA_LUT_10BIT_G GENMASK(19, 10)
>> #define DISP_GAMMA_LUT_10BIT_B GENMASK(9, 0)
>> +/* For 12 bit LUT layout, R/G are in LUT, B is in LUT1 */
>
> As I understood from the application processor registers (v0.4), R/G are in LUT, B
> is in LUT1 for 10bit and 12bit for MT8195. Can you check please to be sure ?
>
That's right, but here I'm implying that 10-bit LUT is only for older SoCs, and
all of them have got the same register layout with one LUT register for R, G, B,
while all the new SoCs, which have got 12-bits LUT support, have got the new
register layout with two LUT registers (and multiple banks).
Infact, the MT8195 SoC was added here with 12-bits LUT support only (as the LUT
parameters extraction is easily handled by the drm_color_lut_extract() function).
The alternative would've been to add two compatibles, like
"mediatek,mt8195-disp-gamma-10bits" and "mediatek,mt8195-disp-gamma-12bits",
or a boolean property like "mediatek,lut-12bits" which would appear literally
everywhere starting from a certain point in time (since there's no reason to
use 10-bits LUT on MT8195, that starts now!).
Even then, consider the complication in code, where mtk_gamma_set_common()
would have to handle:
- 10-bits, layout A
- 10-bits, layout B -> but fallback to layout A if this is AAL
- 12-bits layout
is_aal = !(gamma && gamma->data);
for_each_bank()
{
if (num_lut_banks > 1) write_num_bank();
for (i = 0; i < lut_bank_size; i++) {
.......
if (!lut_diff || (i % 2 == 0)) {
if (lut_bits == 12 || (lut_bits == 10 && layout_b)) {
... setup word[0],[1] ...
} else if (layout_b && !is_aal) {
...setup word[0],[1]...
} else {
...setup word[0]
}
} else {
^^^ almost repeat the same ^^^
}
writel(word[0], (...));
if (lut_bits == 12 || (lut_bits == 10 && layout_b) && !is_aal)
writel(word[i] (....));
}
}
probe() {
if (of_property_read_bool(dev->of_node, "mediatek,lut-12bits") ||
data->supports_only_12bits)
priv->lut_bits = 12;
else
priv->lut_bits = 10;
}
...at least, that's the implementation that I would do to solve your concern,
which isn't *too bad*, but still, a big question arises here...
Why should we care about supporting *both* 10-bit and 12-bit Gamma LUTs on
the *same* SoC?
A 12-bit LUT gives us more precision and there's no penalty if we want to
convert a 10-bit LUT to a 12-bits one, as we're simply "ignoring" the value
of two bits per component (no expensive calculation involved)...
Is there anything that I'm underestimating here?
Cheers,
Angelo
>> +#define DISP_GAMMA_LUT_12BIT_R GENMASK(11, 0)
>> +#define DISP_GAMMA_LUT_12BIT_G GENMASK(23, 12)
>> +#define DISP_GAMMA_LUT_12BIT_B GENMASK(11, 0)
>> +
>> #define LUT_10BIT_MASK 0x03ff
>> #define LUT_BITS_DEFAULT 10
>> #define LUT_SIZE_DEFAULT 512
>> @@ -83,14 +91,15 @@ unsigned int mtk_gamma_get_lut_size(struct device *dev)
>> void mtk_gamma_set_common(struct device *dev, void __iomem *regs, struct
>> drm_crtc_state *state)
>> {
>> struct mtk_disp_gamma *gamma = dev_get_drvdata(dev);
>> - unsigned int i;
>> + void __iomem *lut0_base = regs + DISP_GAMMA_LUT;
>> + void __iomem *lut1_base = regs + DISP_GAMMA_LUT1;
>> + u32 cfg_val, data_mode, lbank_val, word[2];
>> + int cur_bank, num_lut_banks;
>> + u16 lut_bank_size, lut_size;
>> struct drm_color_lut *lut;
>> - void __iomem *lut_base;
>> + unsigned int i;
>> bool lut_diff;
>> - u16 lut_bank_size, lut_size;
>> u8 lut_bits;
>> - u32 cfg_val, lbank_val, word;
>> - int cur_bank, num_lut_banks;
>> /* If there's no gamma lut there's nothing to do here. */
>> if (!state->gamma_lut)
>> @@ -110,14 +119,17 @@ void mtk_gamma_set_common(struct device *dev, void __iomem
>> *regs, struct drm_crt
>> num_lut_banks = lut_size / lut_bank_size;
>> cfg_val = readl(regs + DISP_GAMMA_CFG);
>> - lut_base = regs + DISP_GAMMA_LUT;
>> lut = (struct drm_color_lut *)state->gamma_lut->data;
>> + /* Switch to 12 bits data mode if supported */
>> + data_mode = FIELD_PREP(DISP_GAMMA_BANK_DATA_MODE, !!(lut_bits == 12));
>> +
>> for (cur_bank = 0; cur_bank < num_lut_banks; cur_bank++) {
>> /* Switch gamma bank and set data mode before writing LUT */
>> if (num_lut_banks > 1) {
>> lbank_val = FIELD_PREP(DISP_GAMMA_BANK_BANK, cur_bank);
>> + lbank_val |= data_mode;
>> writel(lbank_val, regs + DISP_GAMMA_BANK);
>> }
>> @@ -130,9 +142,15 @@ void mtk_gamma_set_common(struct device *dev, void __iomem
>> *regs, struct drm_crt
>> hwlut.blue = drm_color_lut_extract(lut[n].blue, lut_bits);
>> if (!lut_diff || (i % 2 == 0)) {
>> - word = FIELD_PREP(DISP_GAMMA_LUT_10BIT_R, hwlut.red);
>> - word |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_G, hwlut.green);
>> - word |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_B, hwlut.blue);
>> + if (lut_bits == 12) {
>> + word[0] = FIELD_PREP(DISP_GAMMA_LUT_12BIT_R, hwlut.red);
>> + word[0] |= FIELD_PREP(DISP_GAMMA_LUT_12BIT_G, hwlut.green);
>> + word[1] = FIELD_PREP(DISP_GAMMA_LUT_12BIT_B, hwlut.blue);
>> + } else {
>> + word[0] = FIELD_PREP(DISP_GAMMA_LUT_10BIT_R, hwlut.red);
>> + word[0] |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_G, hwlut.green);
>> + word[0] |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_B, hwlut.blue);
>> + }
>> } else {
>> diff.red = lut[n].red - lut[n - 1].red;
>> diff.red = drm_color_lut_extract(diff.red, lut_bits);
>> @@ -143,11 +161,19 @@ void mtk_gamma_set_common(struct device *dev, void __iomem
>> *regs, struct drm_crt
>> diff.blue = lut[n].blue - lut[n - 1].blue;
>> diff.blue = drm_color_lut_extract(diff.blue, lut_bits);
>> - word = FIELD_PREP(DISP_GAMMA_LUT_10BIT_R, diff.red);
>> - word |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_G, diff.green);
>> - word |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_B, diff.blue);
>> + if (lut_bits == 12) {
>> + word[0] = FIELD_PREP(DISP_GAMMA_LUT_12BIT_R, diff.red);
>> + word[0] |= FIELD_PREP(DISP_GAMMA_LUT_12BIT_G, diff.green);
>> + word[1] = FIELD_PREP(DISP_GAMMA_LUT_12BIT_B, diff.blue);
>> + } else {
>> + word[0] = FIELD_PREP(DISP_GAMMA_LUT_10BIT_R, diff.red);
>> + word[0] |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_G, diff.green);
>> + word[0] |= FIELD_PREP(DISP_GAMMA_LUT_10BIT_B, diff.blue);
>> + }
>> }
>> - writel(word, (lut_base + i * 4));
>> + writel(word[0], (lut0_base + i * 4));
>> + if (lut_bits == 12)
>> + writel(word[1], (lut1_base + i * 4));
>
> ditto
>
>> }
>> }
>> @@ -271,11 +297,20 @@ static const struct mtk_disp_gamma_data
>> mt8183_gamma_driver_data = {
>> .lut_size = 512,
>> };
>> +static const struct mtk_disp_gamma_data mt8195_gamma_driver_data = {
>> + .lut_bank_size = 256,
>> + .lut_bits = 12,
>
> If I'm right, ".lut_bits = 10" will not work properly.
>
>> + .lut_diff = true,
>> + .lut_size = 1024,
>> +};
>> +
>> static const struct of_device_id mtk_disp_gamma_driver_dt_match[] = {
>> { .compatible = "mediatek,mt8173-disp-gamma",
>> .data = &mt8173_gamma_driver_data},
>> { .compatible = "mediatek,mt8183-disp-gamma",
>> .data = &mt8183_gamma_driver_data},
>> + { .compatible = "mediatek,mt8195-disp-gamma",
>> + .data = &mt8195_gamma_driver_data},
>> {},
>> };
>> MODULE_DEVICE_TABLE(of, mtk_disp_gamma_driver_dt_match);
>
More information about the Linux-mediatek
mailing list