[PATCH 1/3] ASoC: mediatek: mt8188-mt6359: support dynamic pinctrl
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Tue Jul 25 23:43:54 PDT 2023
Il 26/07/23 04:19, Trevor Wu (吳文良) ha scritto:
> On Tue, 2023-07-25 at 09:06 +0200, AngeloGioacchino Del Regno wrote:
>> Il 25/07/23 05:53, Trevor Wu ha scritto:
>>> To avoid power leakage, it is recommended to replace the default
>>> pinctrl
>>> state with dynamic pinctrl since certain audio pinmux functions can
>>> remain in a HIGH state even when audio is disabled. Linking pinctrl
>>> with
>>> DAPM using SND_SOC_DAPM_PINCTRL will ensure that audio pins remain
>>> in
>>> GPIO mode by default and only switch to an audio function when
>>> necessary.
>>>
>>> Signed-off-by: Trevor Wu <trevor.wu at mediatek.com>
>>> ---
>>> sound/soc/mediatek/mt8188/mt8188-mt6359.c | 21
>>> +++++++++++++++++++++
>>> 1 file changed, 21 insertions(+)
>>>
>>> diff --git a/sound/soc/mediatek/mt8188/mt8188-mt6359.c
>>> b/sound/soc/mediatek/mt8188/mt8188-mt6359.c
>>> index 7c9e08e6a4f5..667d79f33bf2 100644
>>> --- a/sound/soc/mediatek/mt8188/mt8188-mt6359.c
>>> +++ b/sound/soc/mediatek/mt8188/mt8188-mt6359.c
>>> @@ -246,6 +246,11 @@ static const struct snd_soc_dapm_widget
>>> mt8188_mt6359_widgets[] = {
>>> SND_SOC_DAPM_MIC("Headset Mic", NULL),
>>> SND_SOC_DAPM_SINK("HDMI"),
>>> SND_SOC_DAPM_SINK("DP"),
>>> +
>>> + /* dynamic pinctrl */
>>> + SND_SOC_DAPM_PINCTRL("ETDM_SPK_PIN", "aud_etdm_spk_on",
>>> "aud_etdm_spk_off"),
>>> + SND_SOC_DAPM_PINCTRL("ETDM_HP_PIN", "aud_etdm_hp_on",
>>> "aud_etdm_hp_off"),
>>> + SND_SOC_DAPM_PINCTRL("MTKAIF_PIN", "aud_mtkaif_on",
>>> "aud_mtkaif_off"),
>>> };
>>>
>>> static const struct snd_kcontrol_new mt8188_mt6359_controls[] = {
>>> @@ -267,6 +272,7 @@ static int
>>> mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
>>> snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
>>> struct snd_soc_component *cmpnt_codec =
>>> asoc_rtd_to_codec(rtd, 0)->component;
>>> + struct snd_soc_dapm_widget *pin_w = NULL, *w;
>>> struct mtk_base_afe *afe;
>>> struct mt8188_afe_private *afe_priv;
>>> struct mtkaif_param *param;
>>> @@ -306,6 +312,18 @@ static int
>>> mt8188_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
>>> return 0;
>>> }
>>>
>>> + for_each_card_widgets(rtd->card, w) {
>>> + if (!strcmp(w->name, "MTKAIF_PIN")) {
>>
>> if (strncmp(w->name, "MTKAIF_PIN", strlen(w->name) == 0) {
>> pin_w = w;
>> break;
>> }
>>
>> That's safer.
>>
>
> If w->name is MTKAIF, the strncmp expression will return 0. However,
> the result is not expected. I prefer to keep strcmp here.
>
You could also do, instead
if (strncmp(w->name, "MTKAIF_PIN", strlen("MTKAIF_PIN") == 0))
...solving your concern.
Regards,
Angelo
>>> + pin_w = w;
>>> + break;
>>> + }
>>> + }
>>> +
>>> + if (!pin_w)
>>
>> Just a nitpick: you're checking for `if (pin_w)` later in this
>> function, so
>> to increase readability please do the same here.
>>
>> if (pin_w)
>> dapm_pinctrl_event(...)
>> else
>> dev_dbg(...)
>>
>
> OK. I will update it in v2.
>
> Thanks,
> Trevor
More information about the Linux-mediatek
mailing list