[PATCH net-next v3 11/12] net: stmmac: replace the rx_clk_runs_in_lpi field with a flag

Bartosz Golaszewski brgl at bgdev.pl
Mon Jul 10 02:00:00 PDT 2023


From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>

Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
Reviewed-by: Andrew Halaney <ahalaney at redhat.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c       | 3 ++-
 include/linux/stmmac.h                                  | 2 +-
 3 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 2692ccebea50..fb593250c2e8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -780,7 +780,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (of_property_read_bool(np, "snps,tso"))
 		plat_dat->flags |= STMMAC_FLAG_TSO_EN;
 	if (of_device_is_compatible(np, "qcom,qcs404-ethqos"))
-		plat_dat->rx_clk_runs_in_lpi = 1;
+		plat_dat->flags |= STMMAC_FLAG_RX_CLK_RUNS_IN_LPI;
 	if (data->has_integrated_pcs)
 		plat_dat->flags |= STMMAC_FLAG_HAS_INTEGRATED_PCS;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ebe82e7b50fc..2d68a6e84b0e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1085,7 +1085,8 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 	stmmac_mac_set(priv, priv->ioaddr, true);
 	if (phy && priv->dma_cap.eee) {
 		priv->eee_active =
-			phy_init_eee(phy, !priv->plat->rx_clk_runs_in_lpi) >= 0;
+			phy_init_eee(phy, !(priv->plat->flags &
+				STMMAC_FLAG_RX_CLK_RUNS_IN_LPI)) >= 0;
 		priv->eee_enabled = stmmac_eee_init(priv);
 		priv->tx_lpi_enabled = priv->eee_enabled;
 		stmmac_set_eee_pls(priv, priv->hw, true);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 47708ddd57fd..c3769dad8238 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -214,6 +214,7 @@ struct dwmac4_addrs {
 #define STMMAC_FLAG_MULTI_MSI_EN		BIT(7)
 #define STMMAC_FLAG_EXT_SNAPSHOT_EN		BIT(8)
 #define STMMAC_FLAG_INT_SNAPSHOT_EN		BIT(9)
+#define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI		BIT(10)
 
 struct plat_stmmacenet_data {
 	int bus_id;
@@ -280,7 +281,6 @@ struct plat_stmmacenet_data {
 	int rss_en;
 	int mac_port_sel_speed;
 	bool en_tx_lpi_clockgating;
-	bool rx_clk_runs_in_lpi;
 	int has_xgmac;
 	u8 vlan_fail_q;
 	unsigned int eee_usecs_rate;
-- 
2.39.2




More information about the Linux-mediatek mailing list