[PATCH v16 1/2] leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support

Jacek Anaszewski jacek.anaszewski at gmail.com
Sun Jan 29 08:46:21 PST 2023


Hi ChiaEn,

On 1/17/23 09:53, ChiaEn Wu wrote:
> From: ChiYuan Huang <cy_huang at richtek.com>
> 
> The MediaTek MT6370 is a highly-integrated smart power management IC,
> which includes a single cell Li-Ion/Li-Polymer switching battery
> charger, a USB Type-C & Power Delivery (PD) controller, dual
> Flash LED current sources, a RGB LED driver, a backlight WLED driver,
> a display bias driver and a general LDO for portable devices.
> 
> Add support for the MediaTek MT6370 Current Sink Type LED Indicator
> driver. It can control four channels current-sink RGB LEDs with 3 modes:
> constant current, PWM, and breath mode.
> 
> Co-developed-by: Alice Chen <alice_chen at richtek.com>
> Signed-off-by: Alice Chen <alice_chen at richtek.com>
> Signed-off-by: ChiYuan Huang <cy_huang at richtek.com>
> Signed-off-by: ChiaEn Wu <chiaen_wu at richtek.com>
> ---
> 
> v16
> - Remove blank line in the head text.
> - Move 'pwm_duty' to descrease the size of struct mt6370_pdata.
> - Move the field 'F_RGB_EN' write out from if/else in
>    'mt6370_isnk_brightness_set'.
> - Remove 'dev' in struct mt6370_priv.
> - Remove the proprety reading for 'linux,default-trigger', led core
>    already did it.
> - Change the module license from 'GPL v2' to 'GPL'
>    In the head text, already deslcred SPDX license as 'GPL-2.0-only'.
> ---
>   drivers/leds/rgb/Kconfig           |   13 +
>   drivers/leds/rgb/Makefile          |    1 +
>   drivers/leds/rgb/leds-mt6370-rgb.c | 1009 ++++++++++++++++++++++++++++++++++++
>   3 files changed, 1023 insertions(+)
>   create mode 100644 drivers/leds/rgb/leds-mt6370-rgb.c
[...]
> +static int mt6370_gen_breath_pattern(struct mt6370_priv *priv,
> +				     struct led_pattern *pattern, u32 len,
> +				     u8 *pattern_val, u32 val_len)
> +{
> +	enum mt6370_led_ranges sel_range;
> +	struct led_pattern *curr;
> +	unsigned int sel;
> +	u32 val = 0;
> +	int i;
> +
> +	if (len < P_MAX_PATTERNS && val_len < P_MAX_PATTERNS / 2)
> +		return -EINVAL;
> +
> +	/*
> +	 * Pattern list
> +	 * tr1:	 byte 0, b'[7: 4]
> +	 * tr2:	 byte 0, b'[3: 0]
> +	 * tf1:	 byte 1, b'[7: 4]
> +	 * tf2:	 byte 1, b'[3: 0]
> +	 * ton:	 byte 2, b'[7: 4]
> +	 * toff: byte 2, b'[3: 0]
> +	 */

Please provide documentation for the hardware pattern format.
Compare [0] and [1].

Otherwise looks good to me:

Acked-by: Jacek Anaszewski <jacek.anaszewski at gmail.com>

[0] Documentation/leds/leds-sc27xx.rst
[1] Documentation/leds/leds-qcom-lpg.rst

-- 
Best regards,
Jacek Anaszewski



More information about the Linux-mediatek mailing list