[PATCH v5 0/3] Add MT8195 HDMI phy support

Guillaume Ranquet granquet at baylibre.com
Fri Jan 27 08:18:50 PST 2023


On Fri, 27 Jan 2023 16:55, Guillaume Ranquet <granquet at baylibre.com> wrote:
>Add support for HDMI phy on MT8195.
>

Please disregard this, as I meant to send v6 and not a new v5...
link to the actual v6 is here:
https://lore.kernel.org/linux-mediatek/20220919-v6-0-2f641c422cb6@baylibre.com/

Sorry for spamming your inboxes,
Guillaume.

>This is split from the previous v3 to contain only the phy related
>changes to the HDMI support for mt8195 as suggested by Vinod.
>
>This is based on top of next-20221121
>
>To: Chunfeng Yun <chunfeng.yun at mediatek.com>
>To: Kishon Vijay Abraham I <kishon at ti.com>
>To: Vinod Koul <vkoul at kernel.org>
>To: Rob Herring <robh+dt at kernel.org>
>To: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
>To: Matthias Brugger <matthias.bgg at gmail.com>
>To: Chun-Kuang Hu <chunkuang.hu at kernel.org>
>To: Philipp Zabel <p.zabel at pengutronix.de>
>To: David Airlie <airlied at gmail.com>
>To: Daniel Vetter <daniel at ffwll.ch>
>To: CK Hu <ck.hu at mediatek.com>
>To: Jitao shi <jitao.shi at mediatek.com>
>Cc: linux-arm-kernel at lists.infradead.org
>Cc: linux-mediatek at lists.infradead.org
>Cc: linux-phy at lists.infradead.org
>Cc: devicetree at vger.kernel.org
>Cc: linux-kernel at vger.kernel.org
>Cc: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>Cc: mac.shen at mediatek.com
>CC: stuart.lee at mediatek.com
>Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
>---
>Changes in v5:
>- Adapt clock bit ratio when TMDS is over 340M
>- Used sized integers for register read/writes
>- Removed useless comments
>- Shortened function names
>- Link to v4: https://lore.kernel.org/r/20220919-v4-0-bdc21e1307e9@baylibre.com
>
>Changes in v4:
>- Dedicated series for HDMI phy support (without the drm/ related
>  changes)
>- Removed useless variable initializations in phy driver
>- Link to v3: https://lore.kernel.org/r/20220919-v3-0-a803f2660127@baylibre.com
>
>Changes in v3:
>- phy: Grouped register and bit definition together to add clarity
>- dt-bindings: Addressed comments
>- Link to v2: https://lore.kernel.org/r/20220919-v2-0-8419dcf4f09d@baylibre.com
>
>Changes in v2:
>- Removed syscon requirement from the hdmi node
>- Use as much as possible bit FIELD_PREP/FIELD_GET macros across all the
>  patches
>- Make cec optional dynamically instead of hardcoded with a flag
>- Renamed hdmi variants to v1 (legacy) and v2 (mt8195) while waiting for
>  a better name
>- Rework hdmi v2 code to use a connector (same as v1)
>- Remove "magic" 0x43 addr special handling in hdmi ddc code
>- Link to v1: https://lore.kernel.org/r/20220919-v1-0-4844816c9808@baylibre.com
>
>---
>Guillaume Ranquet (3):
>      dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible
>      phy: phy-mtk-hdmi: Add generic phy configure callback
>      phy: mediatek: add support for phy-mtk-hdmi-mt8195
>
> .../devicetree/bindings/phy/mediatek,hdmi-phy.yaml |   1 +
> drivers/phy/mediatek/Makefile                      |   1 +
> drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c         | 523 +++++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-hdmi-mt8195.h         | 111 +++++
> drivers/phy/mediatek/phy-mtk-hdmi.c                |  15 +
> drivers/phy/mediatek/phy-mtk-hdmi.h                |   3 +
> 6 files changed, 654 insertions(+)
>---
>base-commit: e2f86c02fdc96ca29ced53221a3cbf50aa6f8b49
>change-id: 20220919-hdmi_mtk
>
>Best regards,
>--
>Guillaume Ranquet <granquet at baylibre.com>



More information about the Linux-mediatek mailing list