[PATCH v11 3/6] arm64/dts/mt8195: Add efuse node to mt8195

[bchihi at baylibre.com]

From: Balsam CHIHI <bchihi at baylibre.com>

Add efuse node.
This will be required by the thermal driver to get the calibration data.

Signed-off-by: Balsam CHIHI <bchihi at baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 5d31536f4c48..09df105f4606 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1380,6 +1380,12 @@ pciephy_glb_intr: pciephy-glb-intr at 193 {
 			dp_calibration: dp-data at 1ac {
 				reg = <0x1ac 0x10>;
 			};
+			lvts_efuse_data1: lvts1-calib at 1bc {
+				reg = <0x1bc 0x14>;
+			};
+			lvts_efuse_data2: lvts2-calib at 1d0 {
+				reg = <0x1d0 0x38>;
+			};
 		};
 
 		u3phy2: t-phy at 11c40000 {
-- 
2.34.1