[PATCH v10 2/6] dt-bindings/thermal/mediatek: Add dt-binding document for LVTS thermal controllers

[Matthias Brugger]

On 12/01/2023 16:28, bchihi at baylibre.com wrote:
> From: Balsam CHIHI <bchihi at baylibre.com>
> 
> Add dt-binding document for mt8192 and mt8195 LVTS thermal controllers.
> 
> Signed-off-by: Balsam CHIHI <bchihi at baylibre.com>
> ---
>   .../thermal/mediatek,lvts-thermal.yaml        | 140 ++++++++++++++++++
>   1 file changed, 140 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> new file mode 100644
> index 000000000000..43b8777fc1b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
> +
> +maintainers:
> +  - Balsam CHIHI <bchihi at baylibre.com>
> +
> +description: |
> +  LVTS is a thermal management architecture composed of three subsystems,
> +  a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
> +  a Converter - Low Voltage Thermal Sensor converter (LVTS), and
> +  a Digital controller (LVTS_CTRL).
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8192-lvts-mcu
> +      - mediatek,mt8192-lvts-ap

I wonder: you provide the binding description for mt8192 but no implementation 
in the driver. Are you sure the description is correct?

Regards,
Matthias

> +      - mediatek,mt8195-lvts-mcu
> +      - mediatek,mt8195-lvts-ap
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +    description: LVTS reset for clearing temporary data on AP/MCU.
> +
> +  nvmem-cells:
> +    minItems: 1
> +    items:
> +      - description: Calibration eFuse data 1 for LVTS
> +      - description: Calibration eFuse data 2 for LVTS
> +
> +  nvmem-cell-names:
> +    minItems: 1
> +    items:
> +      - const: lvts-calib-data-1
> +      - const: lvts-calib-data-2
> +
> +  "#thermal-sensor-cells":
> +    const: 1
> +
> +allOf:
> +  - $ref: thermal-sensor.yaml#
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - mediatek,mt8192-lvts-mcu
> +              - mediatek,mt8192-lvts-ap
> +    then:
> +      properties:
> +        nvmem-cells:
> +          maxItems: 1
> +
> +        nvmem-cell-names:
> +          maxItems: 1
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - mediatek,mt8195-lvts-mcu
> +              - mediatek,mt8195-lvts-ap
> +    then:
> +      properties:
> +        nvmem-cells:
> +          maxItems: 2
> +
> +        nvmem-cell-names:
> +          maxItems: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - resets
> +  - nvmem-cells
> +  - nvmem-cell-names
> +  - "#thermal-sensor-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/mt8195-clk.h>
> +    #include <dt-bindings/reset/mt8195-resets.h>
> +    #include <dt-bindings/thermal/mediatek-lvts.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      lvts_mcu: thermal-sensor at 11278000 {
> +        compatible = "mediatek,mt8195-lvts-mcu";
> +        reg = <0 0x11278000 0 0x1000>;
> +        interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
> +        clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
> +        resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
> +        nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
> +        nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
> +        #thermal-sensor-cells = <1>;
> +      };
> +    };
> +
> +    thermal_zones: thermal-zones {
> +      cpu0-thermal {
> +        polling-delay = <1000>;
> +        polling-delay-passive = <250>;
> +        thermal-sensors = <&lvts_mcu MT819x_MCU_LITTLE_CPU0>;
> +        trips {
> +          cpu0_alert: trip-alert {
> +            temperature = <85000>;
> +            hysteresis = <2000>;
> +            type = "passive";
> +          };
> +          cpu0_crit: trip-crit {
> +            temperature = <100000>;
> +            hysteresis = <2000>;
> +            type = "critical";
> +          };
> +        };
> +      };
> +    };