[PATCH 1/3] arm64: dts: mediatek: Introduce MT8195 LAPTOP and IOT's USB configurations
Macpaul Lin
macpaul.lin at mediatek.com
Tue Jan 10 19:53:12 PST 2023
On 1/11/23 10:19, Chunfeng Yun (云春峰) and Krzysztof Kozlowski wrote:
> On Fri, 2023-01-06 at 13:56 +0100, Krzysztof Kozlowski wrote:
>> On 05/01/2023 10:28, Macpaul Lin wrote:
>>> Introduce the split MT8195 laptop and iot USB configurations.
>>> The hardware specifications for LAPTOP devices is different from
>>> IOT
>>> devices. The major differences include some hardware constrains for
>>> dual-role switch for USB controllers in different configurations,
>>> especially for power management and other control flows as well.
>>>
>>> Here are some hardware specifiction differences listed:
>>> 1. LAPTOP (Cherry Tomato boards) don't support USB gadget (device
>>> mode).
>>> 2. IOT devices must support multiple gadget devices and host
>>> mode.
>>> 3. Dual-role switch is not fully supported. Only USB PORT0
>>> support
>>> dual-role switch.
>>> 4. Power management is designed in primary and secondary
>>> dominator.
>>> For a dual-role port, the device controller is the primary
>>> controller
>>> for power management; while the host controller is the
>>> secondary.
>>> LAPTOP devices should remove device nodes for avoiding
>>> abnormal
>>> behavior.
>>>
>>> This modifcation is to add USB configurations "mt8195-laptop-
>>> usb.dtsi"
>>> for LAPTOP devices, and add "mt8195-iot-usb.dtsi" for IOT devices.
>>>
>>> To remove common USB configurations for mt8195.dtsi and switch
>>> includes
>>> dtsi these new files for the boards will come in next patch.
>>>
>>> Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
>>> ---
>>> .../boot/dts/mediatek/mt8195-iot-usb.dtsi | 122
>>> ++++++++++++++++++
>>> .../boot/dts/mediatek/mt8195-laptop-usb.dtsi | 102
>>> +++++++++++++++
>>> 2 files changed, 224 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-iot-
>>> usb.dtsi
>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-laptop-
>>> usb.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-iot-usb.dtsi
>>> b/arch/arm64/boot/dts/mediatek/mt8195-iot-usb.dtsi
>>> new file mode 100644
>>> index 000000000000..f9bd79542044
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8195-iot-usb.dtsi
>>> @@ -0,0 +1,122 @@
>>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>>> +/*
>>> + * Copyright (C) 2022 MediaTek Inc.
>>> + */
>>> +
>>> +#include "mt8195.dtsi"
>>> +
>>> +/ {
>>> + soc {
>>> + ssusb: ssusb at 11200000 {
>>
>> Node name: usb
Got it.
>>
>>> + compatible ="mediatek,mt8183-mtu3",
>>> "mediatek,mtu3";
>>> + reg = <0 0x11201000 0 0x2dff>,
>>> + <0 0x11203e00 0 0x0100>;
>>> + reg-names = "mac", "ippc";
>>> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH
>>> 0>;
>>> + phys = <&u2port0 PHY_TYPE_USB2>,
>>> + <&u3port0 PHY_TYPE_USB3>;
>>> + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
>>> + <&topckgen CLK_TOP_SSUSB_REF>,
>>> + <&infracfg_ao
>>> CLK_INFRA_AO_SSUSB_XHCI>;
>>> + clock-names = "sys_ck", "ref_ck", "mcu_ck";
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> + status = "disabled";
>>> +
>>> + xhci0: xhci at 11200000 {
> s/xhci/usb
>>> + compatible = "mediatek,mt8195-xhci",
>>> + "mediatek,mtk-xhci";
>>> + reg = <0 0x11200000 0 0x1000>;
>>> + reg-names = "mac";
>>> + interrupts = <GIC_SPI 129
>>> IRQ_TYPE_LEVEL_HIGH 0>;
>>> + assigned-clocks = <&topckgen
>>> CLK_TOP_USB_TOP>,
>>> + <&topckgen
>>> CLK_TOP_SSUSB_XHCI>;
>>> + assigned-clock-parents = <&topckgen
>>> CLK_TOP_UNIVPLL_D5_D4>,
>>> + <&topckgen
>>> CLK_TOP_UNIVPLL_D5_D4>;
>>> + clocks = <&infracfg_ao
>>> CLK_INFRA_AO_SSUSB>,
>>> + <&infracfg_ao
>>> CLK_INFRA_AO_SSUSB_XHCI>,
>>> + <&topckgen CLK_TOP_SSUSB_REF>,
>>> + <&apmixedsys
>>> CLK_APMIXED_USB1PLL>;
>>> + clock-names = "sys_ck", "xhci_ck",
>>> "ref_ck", "mcu_ck";
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + xhci1: xhci1 at 11290000 {
>>
>> Node names should be generic, so just "xhci"
> also use "usb", no generic name "xhci" in the following spec
>
Thanks for the reminding. I'll align the naming assignment in origin
mt8195.dtsi and in the following specification.
>>
> https://urldefense.com/v3/__https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html*generic-names-recommendation__;Iw!!CTRNKA9wMg0ARbw!n5NxtuBHI5f9tS659pqDgRDZNAFxnXriet0G48KA64n1CEWYYsL0vXY0I-Mw99H8a8UDW5KR_79k7IvYg8Er5gNvmkXE9HZH$
>>
>>
>>> + compatible = "mediatek,mt8195-xhci",
>>> + "mediatek,mtk-xhci";
>>> + reg = <0 0x11290000 0 0x1000>,
>>> + <0 0x11293e00 0 0x0100>;
>>> + reg-names = "mac", "ippc";
>>> + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH
>>> 0>;
>>> + phys = <&u2port1 PHY_TYPE_USB2>,
>>> + <&u3port1 PHY_TYPE_USB3>;
>>> + assigned-clocks = <&topckgen
>>> CLK_TOP_USB_TOP_1P>,
>>> + <&topckgen
>>> CLK_TOP_SSUSB_XHCI_1P>;
>>> + assigned-clock-parents = <&topckgen
>>> CLK_TOP_UNIVPLL_D5_D4>,
>>> + <&topckgen
>>> CLK_TOP_UNIVPLL_D5_D4>;
>>> + clocks = <&pericfg_ao
>>> CLK_PERI_AO_SSUSB_1P_BUS>,
>>> + <&pericfg_ao
>>> CLK_PERI_AO_SSUSB_1P_XHCI>,
>>> + <&topckgen CLK_TOP_SSUSB_P1_REF>,
>>> + <&apmixedsys CLK_APMIXED_USB1PLL>;
>>> + clock-names = "sys_ck", "xhci_ck", "ref_ck",
>>> "mcu_ck";
>>> + status = "disabled";
>>> + };
>>> +
>>> + ssusb1: usb1 at 112a1000 {
>>
>> usb
>>
Got it.
>>> + compatible = "mediatek,mt8183-mtu3",
>>> "mediatek,mtu3";
>>> + reg = <0 0x112a1000 0 0x2dff>,
>>> + <0 0x112a3e00 0 0x0100>;
>>> + reg-names = "mac", "ippc";
>>> + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH
>>> 0>;
>>> + phys = <&u2port2 PHY_TYPE_USB2>;
>>> + assigned-clocks = <&topckgen
>>> CLK_TOP_USB_TOP_2P>;
>>> + assigned-clock-parents = <&topckgen
>>> CLK_TOP_UNIVPLL_D5_D4>;
>>> + clocks = <&pericfg_ao
>>> CLK_PERI_AO_SSUSB_2P_BUS>,
>>> + <&topckgen CLK_TOP_SSUSB_P2_REF>,
>>> + <&pericfg_ao
>>> CLK_PERI_AO_SSUSB_2P_XHCI>;
>>> + clock-names = "sys_ck", "ref_ck", "mcu_ck";
>>> + mediatek,syscon-wakeup = <&pericfg 0x400 4>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> + status = "disabled";
>>> +
>>> + xhci2: xhci2 at 112a0000 {
>>
>> xhci
> use "usb", no need change it when move from mt8195.dtsi
>
Got it.
>>
>>> + compatible = "mediatek,mt8195-
>>> xhci","mediatek,mtk-xhci";
>>> + reg = <0 0x112a0000 0 0x1000>;
>>> + reg-names = "mac";
>>> + interrupts-extended = <&gic GIC_SPI 533
>>> IRQ_TYPE_LEVEL_HIGH 0>,
>>> + <&pio 220
>>> IRQ_TYPE_EDGE_FALLING>;
>>> + assigned-clocks = <&topckgen
>>> CLK_TOP_SSUSB_XHCI_2P>;
>>> + assigned-clock-parents = <&topckgen
>>> CLK_TOP_UNIVPLL_D5_D4>;
>>> + clocks = <&pericfg_ao
>>> CLK_PERI_AO_SSUSB_2P_XHCI>;
>>> + clock-names = "sys_ck";
>>> + status = "disabled";
>>> + };
>>> + };
>>> +
>>> + xhci3: xhci3 at 112b0000 {
>>
>> xhci
> usb
Got it.
>>> + compatible = "mediatek,mt8195-xhci",
>>> + "mediatek,mtk-xhci";
>>> + reg = <0 0x112b0000 0 0x1000>,
>>> + <0 0x112b3e00 0 0x0100>;
>>> + reg-names = "mac", "ippc";
>>> + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH
>>> 0>;
>>> + phys = <&u2port3 PHY_TYPE_USB2>;
>>> + assigned-clocks = <&topckgen
>>> CLK_TOP_USB_TOP_3P>,
>>> + <&topckgen
>>> CLK_TOP_SSUSB_XHCI_3P>;
>>> + assigned-clock-parents = <&topckgen
>>> CLK_TOP_UNIVPLL_D5_D4>,
>>> + <&topckgen
>>> CLK_TOP_UNIVPLL_D5_D4>;
>>> + clocks = <&pericfg_ao
>>> CLK_PERI_AO_SSUSB_3P_BUS>,
>>> + <&pericfg_ao
>>> CLK_PERI_AO_SSUSB_3P_XHCI>,
>>> + <&topckgen CLK_TOP_SSUSB_P3_REF>;
>>> + clock-names = "sys_ck", "xhci_ck", "ref_ck";
>>> + mediatek,syscon-wakeup = <&pericfg 0x400 106>;
>>> + wakeup-source;
>>> + usb2-lpm-disable;
>>> + status = "disabled";
>>> + };
>>
>>
>> Best regards,
>> Krzysztof
>>
Thanks
Macpaul Lin
More information about the Linux-mediatek
mailing list