[PATCH v4 05/13] ASoC: mediatek: mt8188: support etdm in platform driver
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Mon Jan 2 06:04:21 PST 2023
Il 30/12/22 06:54, Trevor Wu ha scritto:
> Add mt8188 etdm dai driver support.
>
> Signed-off-by: Trevor Wu <trevor.wu at mediatek.com>
> ---
> sound/soc/mediatek/mt8188/mt8188-dai-etdm.c | 2591 +++++++++++++++++++
> 1 file changed, 2591 insertions(+)
> create mode 100644 sound/soc/mediatek/mt8188/mt8188-dai-etdm.c
>
> diff --git a/sound/soc/mediatek/mt8188/mt8188-dai-etdm.c b/sound/soc/mediatek/mt8188/mt8188-dai-etdm.c
> new file mode 100644
> index 000000000000..f8e69d655706
> --- /dev/null
> +++ b/sound/soc/mediatek/mt8188/mt8188-dai-etdm.c
> @@ -0,0 +1,2591 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MediaTek ALSA SoC Audio DAI eTDM Control
> + *
> + * Copyright (c) 2022 MediaTek Inc.
> + * Author: Bicycle Tsai <bicycle.tsai at mediatek.com>
> + * Trevor Wu <trevor.wu at mediatek.com>
> + * Chun-Chia Chiu <chun-chia.chiu at mediatek.com>
> + */
> +
..snip..
> +
> +static int mtk_dai_etdm_get_clkdiv_id_by_dai_id(int dai_id)
> +{
> + int clk_id = -1;
> +
> + switch (dai_id) {
> + case MT8188_AFE_IO_DPTX:
> + clk_id = MT8188_CLK_TOP_APLL12_DIV9;
return MT8188_CLK_TOP_APLL12_DIV_9;
> + break;
> + case MT8188_AFE_IO_ETDM1_IN:
> + clk_id = MT8188_CLK_TOP_APLL12_DIV0;
return MT8188_CLK_TOP_APLL12_DIV0;
> + break;
> + case MT8188_AFE_IO_ETDM2_IN:
> + clk_id = MT8188_CLK_TOP_APLL12_DIV1;
return .....
> + break;
> + case MT8188_AFE_IO_ETDM1_OUT:
> + clk_id = MT8188_CLK_TOP_APLL12_DIV2;
> + break;
> + case MT8188_AFE_IO_ETDM2_OUT:
> + clk_id = MT8188_CLK_TOP_APLL12_DIV3;
> + break;
> + case MT8188_AFE_IO_ETDM3_OUT:
> + default:
> + break;
> + }
> +
> + return clk_id;
return -EINVAL;
...so you don't need clk_id at all :-)
> +}
> +
..snip..
> +
> +static int mtk_dai_etdm_mclk_configure(struct mtk_base_afe *afe, int dai_id)
> +{
> + struct mt8188_afe_private *afe_priv = afe->platform_priv;
> + struct mtk_dai_etdm_priv *etdm_data;
> + int clk_id = mtk_dai_etdm_get_clk_id_by_dai_id(dai_id);
> + int clkdiv_id = mtk_dai_etdm_get_clkdiv_id_by_dai_id(dai_id);
> + int apll;
> + int apll_clk_id;
> + struct etdm_con_reg etdm_reg;
> + int ret = 0;
> +
> + if (clk_id < 0 || clkdiv_id < 0)
> + return 0;
> +
> + if (!is_valid_etdm_dai(dai_id))
> + return -EINVAL;
> + etdm_data = afe_priv->dai_priv[dai_id];
> +
> + ret = get_etdm_reg(dai_id, &etdm_reg);
> + if (ret < 0)
> + return ret;
> +
> + if (etdm_data->mclk_dir == SND_SOC_CLOCK_OUT)
> + regmap_set_bits(afe->regmap, etdm_reg.con1,
> + ETDM_CON1_MCLK_OUTPUT);
> + else
> + regmap_clear_bits(afe->regmap, etdm_reg.con1,
> + ETDM_CON1_MCLK_OUTPUT);
> +
> + if (etdm_data->mclk_freq) {
> + apll = etdm_data->mclk_apll;
> + apll_clk_id = mt8188_afe_get_mclk_source_clk_id(apll);
> + if (apll_clk_id < 0)
> + return apll_clk_id;
> +
> + /* select apll */
> + ret = mt8188_afe_set_clk_parent(afe, afe_priv->clk[clk_id],
> + afe_priv->clk[apll_clk_id]);
> + if (ret)
> + return ret;
> +
> + /* set rate */
> + ret = mt8188_afe_set_clk_rate(afe, afe_priv->clk[clkdiv_id],
> + etdm_data->mclk_freq);
Check ret here...
> + } else {
> + if (etdm_data->mclk_dir == SND_SOC_CLOCK_OUT)
> + dev_dbg(afe->dev, "%s mclk freq = 0\n", __func__);
> + }
> +
...and return 0 here.
> + return ret;
> +}
> +
..snip..
> +
> +static int mtk_dai_etdm_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + int ret = 0;
> + unsigned int rate = params_rate(params);
> + unsigned int bit_width = params_width(params);
> + unsigned int channels = params_channels(params);
> + struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
> + struct mt8188_afe_private *afe_priv = afe->platform_priv;
> + struct mtk_dai_etdm_priv *mst_etdm_data;
> + int mst_dai_id;
> + int slv_dai_id;
> + int i;
> +
> + dev_dbg(afe->dev, "%s '%s' period %u-%u\n",
> + __func__, snd_pcm_stream_str(substream),
> + params_period_size(params), params_periods(params));
> +
> + if (is_cowork_mode(dai)) {
> + mst_dai_id = get_etdm_cowork_master_id(dai);
> + if (!is_valid_etdm_dai(mst_dai_id))
> + return -EINVAL;
> +
> + ret = mtk_dai_etdm_mclk_configure(afe, mst_dai_id);
> + if (ret)
> + return ret;
> +
> + ret = mtk_dai_etdm_configure(afe, rate, channels,
> + bit_width, mst_dai_id);
> + if (ret)
> + return ret;
> +
> + mst_etdm_data = afe_priv->dai_priv[mst_dai_id];
> + for (i = 0; i < mst_etdm_data->cowork_slv_count; i++) {
> + slv_dai_id = mst_etdm_data->cowork_slv_id[i];
> + ret = mtk_dai_etdm_configure(afe, rate, channels,
> + bit_width, slv_dai_id);
> + if (ret)
> + return ret;
> +
> + ret = mt8188_etdm_sync_mode_configure(afe, slv_dai_id);
> + if (ret)
> + return ret;
> + }
> + } else {
> + ret = mtk_dai_etdm_mclk_configure(afe, dai->id);
> + if (ret)
> + return ret;
> +
> + ret = mtk_dai_etdm_configure(afe, rate, channels,
> + bit_width, dai->id);
Check return value here...
> + }
> +
...and return 0 here.
> + return ret;
> +}
> +
> +static int mtk_dai_etdm_prepare(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
> + struct mt8188_afe_private *afe_priv = afe->platform_priv;
> + struct mtk_dai_etdm_priv *mst_etdm_data;
> + int mst_dai_id;
> + int slv_dai_id;
> + int i;
> + int ret = 0;
> +
> + if (!is_valid_etdm_dai(dai->id))
> + return -EINVAL;
> + mst_etdm_data = afe_priv->dai_priv[dai->id];
> +
> + dev_dbg(afe->dev, "%s(), dai id %d, prepared %d\n", __func__, dai->id,
> + mst_etdm_data->is_prepared);
> +
> + if (mst_etdm_data->is_prepared)
> + return 0;
> +
> + mst_etdm_data->is_prepared = true;
> +
> + if (is_cowork_mode(dai)) {
> + mst_dai_id = get_etdm_cowork_master_id(dai);
> + if (!is_valid_etdm_dai(mst_dai_id))
> + return -EINVAL;
> + mst_etdm_data = afe_priv->dai_priv[mst_dai_id];
> +
> + for (i = 0; i < mst_etdm_data->cowork_slv_count; i++) {
> + slv_dai_id = mst_etdm_data->cowork_slv_id[i];
> + ret |= mt8188_afe_enable_etdm(afe, slv_dai_id);
> + }
> +
> + ret |= mt8188_afe_enable_etdm(afe, mst_dai_id);
OR'ing return values is not an acceptable practice: you should check for error
right after the call and immediately take action if anything wrong happened.
> + } else {
> + ret = mt8188_afe_enable_etdm(afe, dai->id);
Same comment as the previous function: check ret here.
> + }
> +
> + return ret;
> +}
> +
..snip..
> +
> +static int mtk_dai_hdmitx_dptx_prepare(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *dai)
> +{
> + struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
> + struct mt8188_afe_private *afe_priv = afe->platform_priv;
> + struct mtk_dai_etdm_priv *etdm_data;
> + int ret;
> +
> + if (!is_valid_etdm_dai(dai->id))
> + return -EINVAL;
> + etdm_data = afe_priv->dai_priv[dai->id];
> +
> + dev_dbg(afe->dev, "%s(), dai id %d, prepared %d\n", __func__, dai->id,
> + etdm_data->is_prepared);
> +
> + if (etdm_data->is_prepared)
> + return 0;
> +
> + etdm_data->is_prepared = true;
> +
> + /* enable dptx interface */
> + if (dai->id == MT8188_AFE_IO_DPTX)
> + regmap_set_bits(afe->regmap, AFE_DPTX_CON, AFE_DPTX_CON_ON);
> +
> + /* enable etdm_out3 */
> + ret = mt8188_afe_enable_etdm(afe, dai->id);
You don't need the `ret` variable here...
return mt8188_afe_enable_etdm(afe, dai->id);
> +
> + return ret;
> +}
> +
Apart from this, looks good.
Regards,
Angelo
More information about the Linux-mediatek
mailing list