[PATCH v3 4/4] clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Mon Feb 27 01:28:06 PST 2023
Il 25/02/23 10:42, Yassine Oudjana ha scritto:
> From: Yassine Oudjana <y.oudjana at protonmail.com>
>
> Add drivers for MT6735 apmixedsys, topckgen, infracfg and pericfg
> clock and reset controllers. These provide the base clocks and resets
> on the platform, and should be enough to bring up all essential blocks
> including PWRAP, MSDC and peripherals (UART, I2C, SPI).
>
> Signed-off-by: Yassine Oudjana <y.oudjana at protonmail.com>
> ---
> MAINTAINERS | 4 +
> drivers/clk/mediatek/Kconfig | 9 +
> drivers/clk/mediatek/Makefile | 1 +
> drivers/clk/mediatek/clk-mt6735-apmixedsys.c | 139 ++++++
> drivers/clk/mediatek/clk-mt6735-infracfg.c | 78 ++++
> drivers/clk/mediatek/clk-mt6735-pericfg.c | 91 ++++
> drivers/clk/mediatek/clk-mt6735-topckgen.c | 450 +++++++++++++++++++
> 7 files changed, 772 insertions(+)
> create mode 100644 drivers/clk/mediatek/clk-mt6735-apmixedsys.c
> create mode 100644 drivers/clk/mediatek/clk-mt6735-infracfg.c
> create mode 100644 drivers/clk/mediatek/clk-mt6735-pericfg.c
> create mode 100644 drivers/clk/mediatek/clk-mt6735-topckgen.c
>
..snip..
> diff --git a/drivers/clk/mediatek/clk-mt6735-topckgen.c b/drivers/clk/mediatek/clk-mt6735-topckgen.c
> new file mode 100644
> index 000000000000..5fa743e4b0fc
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt6735-topckgen.c
> @@ -0,0 +1,450 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 Yassine Oudjana <y.oudjana at protonmail.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/platform_device.h>
> +
> +#include "clk-mtk.h"
> +#include "clk-mux.h"
> +
> +#include <dt-bindings/clock/mediatek,mt6735-topckgen.h>
> +
..snip..
> +
> +int clk_mt6735_topckgen_probe(struct platform_device *pdev)
It gets *even easier* than that!
Check out this one:
https://patchwork.kernel.org/project/linux-mediatek/patch/20230222092543.19187-5-angelogioacchino.delregno@collabora.com/
...being part of:
https://patchwork.kernel.org/project/linux-mediatek/list/?series=724004
So you can use simple_probe for MT6735's topckgen too!
In this case, it would be...
static const struct mtk_clk_desc topck_desc = {
.clks = topckgen_muxes,
.num_clks = ARRAY_SIZE(topckgen_muxes),
.fixed_clks = topckgen_fixed_clks,
.num_fixed_clks = ARRAY_SIZE(topckgen_fixed_clks),
.factor_clks = topckgen_factors,
.num_factor_clks = ARRAY_SIZE(topckgen_factors),
.clk_lock = &mt6735_topckgen_lock,
};
static const struct of_device_id of_match_mt6735_topckgen[] = {
{ .compatible = "mediatek,mt6735-topckgen", .data = &topck_desc },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_match_mt6735_topckgen)
^^^^^
You're missing that on multiple clock drivers ;-)
...And you're replacing .probe(), .remove() callbacks with
static struct platform_driver clk_mt6735_topckgen = {
.probe = mtk_clk_simple_probe,
.remove = mtk_clk_simple_remove,
......
Other than that, good job!
After performing these changes, please make sure to mention the dependency on
my last cleanup series on your cover letter for v4, so that maintainers will
be aware of what to do.
Your v4 smells like Reviewed-by tags all over. Keep up the great work!
Cheers,
Angelo
More information about the Linux-mediatek
mailing list