[PATCH] wifi: mt76: mt7915: add dev->hif2 support for mt7916 WED device

Sujuan Chen sujuan.chen at mediatek.com
Tue Feb 21 22:29:36 PST 2023


Enable two PCIe interfaces (dev->hif2) support for mt7916 when WED is enabled.

Signed-off-by: Sujuan Chen <sujuan.chen at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/dma.c  | 10 ++++++++--
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c  |  3 ++-
 drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 10 +++++-----
 3 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
index abe17dac9996..43a5456d4b97 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/dma.c
@@ -87,8 +87,14 @@ static void mt7915_dma_config(struct mt7915_dev *dev)
 				   MT7916_RXQ_BAND0);
 			RXQ_CONFIG(MT_RXQ_MCU_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MT7916,
 				   MT7916_RXQ_MCU_WA);
-			RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0, MT_INT_WED_RX_DONE_BAND1_MT7916,
-				   MT7916_RXQ_BAND1);
+			if (dev->hif2)
+				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
+					   MT_INT_RX_DONE_BAND1_MT7916,
+					   MT7916_RXQ_BAND1);
+			else
+				RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
+					   MT_INT_WED_RX_DONE_BAND1_MT7916,
+					   MT7916_RXQ_BAND1);
 			RXQ_CONFIG(MT_RXQ_MAIN_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MAIN_MT7916,
 				   MT7916_RXQ_MCU_WA_MAIN);
 			TXQ_CONFIG(0, WFDMA0, MT_INT_WED_TX_DONE_BAND0,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 5545a8bdf1d0..cd440aaa969e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2370,7 +2370,8 @@ int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
 	if (ret)
 		return ret;
 
-	if (mtk_wed_device_active(&dev->mt76.mmio.wed) && is_mt7915(&dev->mt76))
+	if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
+	    is_mt7915(&dev->mt76) || !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
 		mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0, 0, 0);
 
 	ret = mt7915_mcu_set_mwds(dev, 1);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
index 225a19604d3e..6f0c0e2ae045 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mmio.c
@@ -989,13 +989,13 @@ irqreturn_t mt7915_irq_handler(int irq, void *dev_instance)
 	struct mt7915_dev *dev = dev_instance;
 	struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
 
-	if (mtk_wed_device_active(wed)) {
+	if (mtk_wed_device_active(wed))
 		mtk_wed_device_irq_set_mask(wed, 0);
-	} else {
+	else
 		mt76_wr(dev, MT_INT_MASK_CSR, 0);
-		if (dev->hif2)
-			mt76_wr(dev, MT_INT1_MASK_CSR, 0);
-	}
+
+	if (dev->hif2)
+		mt76_wr(dev, MT_INT1_MASK_CSR, 0);
 
 	if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state))
 		return IRQ_NONE;
-- 
2.18.0




More information about the Linux-mediatek mailing list