[PATCH] wifi: mt76: mt7915: rework init flow in mt7915_thermal_init()

[Howard Hsu]

If kernel do not enable CONFIG_HWMON, it may cause thermal
initialization to be done with temperature value 0 and then can not
transmit. This commit fixes it by setting trigger/restore temperature
before checking CONFIG_HWMON.

Fixes: 7d12b38 ("wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work")
Signed-off-by: Howard Hsu <howard-yh.hsu at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/init.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index 1ab768feccaa..c48dcb928649 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -202,6 +202,10 @@ static int mt7915_thermal_init(struct mt7915_phy *phy)
 			phy->cdev = cdev;
 	}
 
+	/* initialize critical/maximum high temperature */
+	phy->throttle_temp[MT7915_CRIT_TEMP_IDX] = MT7915_CRIT_TEMP;
+	phy->throttle_temp[MT7915_MAX_TEMP_IDX] = MT7915_MAX_TEMP;
+
 	if (!IS_REACHABLE(CONFIG_HWMON))
 		return 0;
 
@@ -210,10 +214,6 @@ static int mt7915_thermal_init(struct mt7915_phy *phy)
 	if (IS_ERR(hwmon))
 		return PTR_ERR(hwmon);
 
-	/* initialize critical/maximum high temperature */
-	phy->throttle_temp[MT7915_CRIT_TEMP_IDX] = MT7915_CRIT_TEMP;
-	phy->throttle_temp[MT7915_MAX_TEMP_IDX] = MT7915_MAX_TEMP;
-
 	return 0;
 }
 
-- 
2.18.0