[PATCH v1 29/45] clk: mediatek: mt7986-apmixed: Use PLL_AO flag to set critical clock

Daniel Golle daniel at makrotopia.org
Tue Feb 7 06:43:24 PST 2023


On Mon, Feb 06, 2023 at 04:29:12PM +0100, AngeloGioacchino Del Regno wrote:
> Instead of calling clk_prepare_enable() at probe time, add the PLL_AO
> flag to CLK_APMIXED_ARMPLL clock: this will set CLK_IS_CRITICAL.

I've been preparing a similar change, but also splitting-off the
apmixed part from dt headers into a file of its own, so that one of now
identical drivers for MT7986 and MT7981 can be removed in favor of a
shared driver.
Should I propose this on top of this series or can you make this change?


> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> ---
>  drivers/clk/mediatek/clk-mt7986-apmixed.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/mediatek/clk-mt7986-apmixed.c b/drivers/clk/mediatek/clk-mt7986-apmixed.c
> index 62080ee4dbe3..227ca572056e 100644
> --- a/drivers/clk/mediatek/clk-mt7986-apmixed.c
> +++ b/drivers/clk/mediatek/clk-mt7986-apmixed.c
> @@ -42,7 +42,7 @@
>  		 "clkxtal")
>  
>  static const struct mtk_pll_data plls[] = {
> -	PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, 0, 32,
> +	PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, PLL_AO, 32,
>  	    0x0200, 4, 0, 0x0204, 0),
>  	PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x0, 0, 32,
>  	    0x0210, 4, 0, 0x0214, 0),
> @@ -77,8 +77,6 @@ static int clk_mt7986_apmixed_probe(struct platform_device *pdev)
>  
>  	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
>  
> -	clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk);
> -
>  	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
>  	if (r) {
>  		pr_err("%s(): could not register clock provider: %d\n",
> -- 
> 2.39.1
> 
> 



More information about the Linux-mediatek mailing list