[PATCH v3 6/7] clk: mediatek: mt8192: Add support for frequency hopping through FHCTL
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Mon Feb 6 02:01:04 PST 2023
Add FHCTL parameters and register PLLs through FHCTL to add support
for frequency hopping and SSC. FHCTL will be enabled only on PLLs
specified in devicetree.
This commit brings functional changes only upon addition of
devicetree configuration.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
drivers/clk/mediatek/clk-mt8192.c | 67 ++++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt8192.c b/drivers/clk/mediatek/clk-mt8192.c
index 61299960d28a..0f9f10172148 100644
--- a/drivers/clk/mediatek/clk-mt8192.c
+++ b/drivers/clk/mediatek/clk-mt8192.c
@@ -12,10 +12,12 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include "clk-fhctl.h"
#include "clk-gate.h"
#include "clk-mtk.h"
#include "clk-mux.h"
#include "clk-pll.h"
+#include "clk-pllfh.h"
#include <dt-bindings/clock/mt8192-clk.h>
#include <dt-bindings/reset/mt8192-resets.h>
@@ -1042,6 +1044,57 @@ static const struct mtk_pll_data plls[] = {
0, 0, 32, 0x0330, 24, 0, 0, 0, 0x0334, 0),
};
+enum fh_pll_id {
+ FH_ARMPLL_LL,
+ FH_ARMPLL_BL0,
+ FH_ARMPLL_BL1,
+ FH_ARMPLL_BL2,
+ FH_ARMPLL_BL3,
+ FH_CCIPLL,
+ FH_MFGPLL,
+ FH_MEMPLL,
+ FH_MPLL,
+ FH_MMPLL,
+ FH_MAINPLL,
+ FH_MSDCPLL,
+ FH_ADSPPLL,
+ FH_APUPLL,
+ FH_TVDPLL,
+ FH_NR_FH,
+};
+
+#define FH(_pllid, _fhid, _offset) { \
+ .data = { \
+ .pll_id = _pllid, \
+ .fh_id = _fhid, \
+ .fh_ver = FHCTL_PLLFH_V2, \
+ .fhx_offset = _offset, \
+ .dds_mask = GENMASK(21, 0), \
+ .slope0_value = 0x6003c97, \
+ .slope1_value = 0x6003c97, \
+ .sfstrx_en = BIT(2), \
+ .frddsx_en = BIT(1), \
+ .fhctlx_en = BIT(0), \
+ .tgl_org = BIT(31), \
+ .dvfs_tri = BIT(31), \
+ .pcwchg = BIT(31), \
+ .dt_val = 0x0, \
+ .df_val = 0x9, \
+ .updnlmt_shft = 16, \
+ .msk_frddsx_dys = GENMASK(23, 20), \
+ .msk_frddsx_dts = GENMASK(19, 16), \
+ }, \
+ }
+
+static struct mtk_pllfh_data pllfhs[] = {
+ FH(CLK_APMIXED_MFGPLL, FH_MFGPLL, 0xb4),
+ FH(CLK_APMIXED_MMPLL, FH_MMPLL, 0xf0),
+ FH(CLK_APMIXED_MAINPLL, FH_MAINPLL, 0x104),
+ FH(CLK_APMIXED_MSDCPLL, FH_MSDCPLL, 0x118),
+ FH(CLK_APMIXED_ADSPPLL, FH_ADSPPLL, 0x12c),
+ FH(CLK_APMIXED_TVDPLL, FH_TVDPLL, 0x154),
+};
+
/* Register mux notifier for MFG mux */
static int clk_mt8192_reg_mfg_mux_notifier(struct device *dev, struct clk *clk)
{
@@ -1068,17 +1121,24 @@ static int clk_mt8192_apmixed_probe(struct platform_device *pdev)
{
struct clk_hw_onecell_data *clk_data;
struct device_node *node = pdev->dev.of_node;
+ const u8 *fhctl_node = "mediatek,mt8192-fhctl";
int r;
clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
if (!clk_data)
return -ENOMEM;
- mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+ fhctl_parse_dt(fhctl_node, pllfhs, ARRAY_SIZE(pllfhs));
+
+ r = mtk_clk_register_pllfhs(node, plls, ARRAY_SIZE(plls),
+ pllfhs, ARRAY_SIZE(pllfhs), clk_data);
+ if (r)
+ goto free_clk_data;
+
r = mtk_clk_register_gates(&pdev->dev, node, apmixed_clks,
ARRAY_SIZE(apmixed_clks), clk_data);
if (r)
- goto free_clk_data;
+ goto unregister_plls;
r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
if (r)
@@ -1088,6 +1148,9 @@ static int clk_mt8192_apmixed_probe(struct platform_device *pdev)
unregister_gates:
mtk_clk_unregister_gates(apmixed_clks, ARRAY_SIZE(apmixed_clks), clk_data);
+unregister_plls:
+ mtk_clk_unregister_pllfhs(plls, ARRAY_SIZE(plls), pllfhs,
+ ARRAY_SIZE(pllfhs), clk_data);
free_clk_data:
mtk_free_clk_data(clk_data);
return r;
--
2.39.1
More information about the Linux-mediatek
mailing list