[PATCH v5 2/3] soc: mediatek: mtk-svs: use common function to disable restore voltages

Matthias Brugger matthias.bgg at gmail.com
Thu Feb 2 04:46:28 PST 2023



On 02/02/2023 13:41, Roger Lu wrote:
> The timing of disabling SVS bank and restore default voltage is more
> than one place. Therefore, add a common function to use for removing
> the superfluous codes.
> 
> Signed-off-by: Roger Lu <roger.lu at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Queued for the next merge window.

Thanks!

> ---
>   drivers/soc/mediatek/mtk-svs.c | 54 ++++++++++++++--------------------
>   1 file changed, 22 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
> index c9899f5df60a..299f580847bd 100644
> --- a/drivers/soc/mediatek/mtk-svs.c
> +++ b/drivers/soc/mediatek/mtk-svs.c
> @@ -624,6 +624,25 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
>   	return ret;
>   }
>   
> +static void svs_bank_disable_and_restore_default_volts(struct svs_platform *svsp,
> +						       struct svs_bank *svsb)
> +{
> +	unsigned long flags;
> +
> +	if (svsb->mode_support == SVSB_MODE_ALL_DISABLE)
> +		return;
> +
> +	spin_lock_irqsave(&svs_lock, flags);
> +	svsp->pbank = svsb;
> +	svs_switch_bank(svsp);
> +	svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
> +	svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
> +	spin_unlock_irqrestore(&svs_lock, flags);
> +
> +	svsb->phase = SVSB_PHASE_ERROR;
> +	svs_adjust_pm_opp_volts(svsb);
> +}
> +
>   #ifdef CONFIG_DEBUG_FS
>   static int svs_dump_debug_show(struct seq_file *m, void *p)
>   {
> @@ -700,7 +719,6 @@ static ssize_t svs_enable_debug_write(struct file *filp,
>   {
>   	struct svs_bank *svsb = file_inode(filp)->i_private;
>   	struct svs_platform *svsp = dev_get_drvdata(svsb->dev);
> -	unsigned long flags;
>   	int enabled, ret;
>   	char *buf = NULL;
>   
> @@ -716,16 +734,8 @@ static ssize_t svs_enable_debug_write(struct file *filp,
>   		return ret;
>   
>   	if (!enabled) {
> -		spin_lock_irqsave(&svs_lock, flags);
> -		svsp->pbank = svsb;
> +		svs_bank_disable_and_restore_default_volts(svsp, svsb);
>   		svsb->mode_support = SVSB_MODE_ALL_DISABLE;
> -		svs_switch_bank(svsp);
> -		svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
> -		svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
> -		spin_unlock_irqrestore(&svs_lock, flags);
> -
> -		svsb->phase = SVSB_PHASE_ERROR;
> -		svs_adjust_pm_opp_volts(svsb);
>   	}
>   
>   	kfree(buf);
> @@ -1508,16 +1518,7 @@ static int svs_init02(struct svs_platform *svsp)
>   out_of_init02:
>   	for (idx = 0; idx < svsp->bank_max; idx++) {
>   		svsb = &svsp->banks[idx];
> -
> -		spin_lock_irqsave(&svs_lock, flags);
> -		svsp->pbank = svsb;
> -		svs_switch_bank(svsp);
> -		svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
> -		svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
> -		spin_unlock_irqrestore(&svs_lock, flags);
> -
> -		svsb->phase = SVSB_PHASE_ERROR;
> -		svs_adjust_pm_opp_volts(svsb);
> +		svs_bank_disable_and_restore_default_volts(svsp, svsb);
>   	}
>   
>   	return ret;
> @@ -1563,23 +1564,12 @@ static int svs_suspend(struct device *dev)
>   {
>   	struct svs_platform *svsp = dev_get_drvdata(dev);
>   	struct svs_bank *svsb;
> -	unsigned long flags;
>   	int ret;
>   	u32 idx;
>   
>   	for (idx = 0; idx < svsp->bank_max; idx++) {
>   		svsb = &svsp->banks[idx];
> -
> -		/* This might wait for svs_isr() process */
> -		spin_lock_irqsave(&svs_lock, flags);
> -		svsp->pbank = svsb;
> -		svs_switch_bank(svsp);
> -		svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
> -		svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
> -		spin_unlock_irqrestore(&svs_lock, flags);
> -
> -		svsb->phase = SVSB_PHASE_ERROR;
> -		svs_adjust_pm_opp_volts(svsb);
> +		svs_bank_disable_and_restore_default_volts(svsp, svsb);
>   	}
>   
>   	ret = reset_control_assert(svsp->rst);



More information about the Linux-mediatek mailing list