[PATCH v4] dt-bindings: net: wireless: mt76: add interrupts description for MT7986

[Peter Chiu]

The mt7986 can support four interrupts to distribute the interrupts
to different CPUs.

Signed-off-by: Peter Chiu <chui-hao.chiu at mediatek.com>
---
v2: Change to use description instead of using items.
v3: Change to use items and set different minItems for mediatek,mt7986-wmac
v4: Move allOf after required and remove duplicated blank line.
---
 .../bindings/net/wireless/mediatek,mt76.yaml  | 32 ++++++++++++++++---
 1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
index 252207adbc54..0c6835db397f 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -19,9 +19,6 @@ description: |
   Alternatively, it can specify the wireless part of the MT7628/MT7688
   or MT7622/MT7986 SoC.
 
-allOf:
-  - $ref: ieee80211.yaml#
-
 properties:
   compatible:
     enum:
@@ -38,7 +35,12 @@ properties:
       MT7986 should contain 3 regions consys, dcm, and sku, in this order.
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: major interrupt for rings
+      - description: additional interrupt for ring 19
+      - description: additional interrupt for ring 4
+      - description: additional interrupt for ring 5
 
   power-domains:
     maxItems: 1
@@ -217,6 +219,23 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: ieee80211.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-wmac
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
@@ -293,7 +312,10 @@ examples:
         reg = <0x18000000 0x1000000>,
               <0x10003000 0x1000>,
               <0x11d10000 0x1000>;
-        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&topckgen 50>,
                  <&topckgen 62>;
         clock-names = "mcu", "ap2conn";
-- 
2.18.0