[PATCH] ufs: mcq: Adding a function for MCQ enable

[Manivannan Sadhasivam]

On Wed, Dec 20, 2023 at 02:27:37PM +0900, Chanwoo Lee wrote:
> From: ChanWoo Lee <cw9316.lee at samsung.com>
> 
> The REG_UFS_MEM_CFG register is too general(broad)
> and it is difficult to know the meaning of only values of 0x1 and 0x2.
> So far, comments were required.
> 
> Therefore, I have added new functions and defines
> to improve code readability/reusability.
> 
> Signed-off-by: ChanWoo Lee <cw9316.lee at samsung.com>
> ---
>  drivers/ufs/core/ufs-mcq.c      | 10 +++++++++-
>  drivers/ufs/core/ufshcd.c       |  5 +----
>  drivers/ufs/host/ufs-mediatek.c |  4 +---
>  include/ufs/ufshcd.h            |  1 +
>  include/ufs/ufshci.h            |  4 ++++
>  5 files changed, 16 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/ufs/core/ufs-mcq.c b/drivers/ufs/core/ufs-mcq.c
> index 0787456c2b89..a34ef3aac540 100644
> --- a/drivers/ufs/core/ufs-mcq.c
> +++ b/drivers/ufs/core/ufs-mcq.c
> @@ -394,11 +394,19 @@ EXPORT_SYMBOL_GPL(ufshcd_mcq_make_queues_operational);
>  
>  void ufshcd_mcq_enable_esi(struct ufs_hba *hba)
>  {
> -	ufshcd_writel(hba, ufshcd_readl(hba, REG_UFS_MEM_CFG) | 0x2,
> +	ufshcd_writel(hba, ufshcd_readl(hba, REG_UFS_MEM_CFG) | ESI_ENABLE,
>  		      REG_UFS_MEM_CFG);

This change should be a separate patch.

>  }
>  EXPORT_SYMBOL_GPL(ufshcd_mcq_enable_esi);
>  
> +void ufshcd_mcq_enable(struct ufs_hba *hba)
> +{
> +	ufshcd_writel(hba, ufshcd_readl(hba, REG_UFS_MEM_CFG) | MCQ_MODE_SELECT,
> +		      REG_UFS_MEM_CFG);

Use ufshcd_rmwl().

> +	hba->mcq_enabled = true;
> +}
> +EXPORT_SYMBOL_GPL(ufshcd_mcq_enable);
> +
>  void ufshcd_mcq_config_esi(struct ufs_hba *hba, struct msi_msg *msg)
>  {
>  	ufshcd_writel(hba, msg->address_lo, REG_UFS_ESILBA);
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
> index ae9936fc6ffb..8195e01e7a3f 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -8723,10 +8723,7 @@ static void ufshcd_config_mcq(struct ufs_hba *hba)
>  	hba->host->can_queue = hba->nutrs - UFSHCD_NUM_RESERVED;
>  	hba->reserved_slot = hba->nutrs - UFSHCD_NUM_RESERVED;
>  
> -	/* Select MCQ mode */
> -	ufshcd_writel(hba, ufshcd_readl(hba, REG_UFS_MEM_CFG) | 0x1,
> -		      REG_UFS_MEM_CFG);
> -	hba->mcq_enabled = true;
> +	ufshcd_mcq_enable(hba);
>  
>  	dev_info(hba->dev, "MCQ configured, nr_queues=%d, io_queues=%d, read_queue=%d, poll_queues=%d, queue_depth=%d\n",
>  		 hba->nr_hw_queues, hba->nr_queues[HCTX_TYPE_DEFAULT],
> diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
> index fc61790d289b..1048add66419 100644
> --- a/drivers/ufs/host/ufs-mediatek.c
> +++ b/drivers/ufs/host/ufs-mediatek.c
> @@ -1219,9 +1219,7 @@ static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
>  		ufs_mtk_config_mcq(hba, false);
>  		ufshcd_mcq_make_queues_operational(hba);
>  		ufshcd_mcq_config_mac(hba, hba->nutrs);
> -		/* Enable MCQ mode */
> -		ufshcd_writel(hba, ufshcd_readl(hba, REG_UFS_MEM_CFG) | 0x1,
> -			      REG_UFS_MEM_CFG);
> +		ufshcd_mcq_enable(hba);

hba->mcq_enabled flag will be set now which is not done previously.

>  	}
>  
>  	if (err)
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> index d862c8ddce03..a96c45fa4b4b 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -1257,6 +1257,7 @@ unsigned long ufshcd_mcq_poll_cqe_lock(struct ufs_hba *hba,
>  					 struct ufs_hw_queue *hwq);
>  void ufshcd_mcq_make_queues_operational(struct ufs_hba *hba);
>  void ufshcd_mcq_enable_esi(struct ufs_hba *hba);
> +void ufshcd_mcq_enable(struct ufs_hba *hba);
>  void ufshcd_mcq_config_esi(struct ufs_hba *hba, struct msi_msg *msg);
>  
>  int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table,
> diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
> index d5accacae6bc..e669fad11fd4 100644
> --- a/include/ufs/ufshci.h
> +++ b/include/ufs/ufshci.h
> @@ -282,6 +282,10 @@ enum {
>  /* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
>  #define UTP_TASK_REQ_LIST_RUN_STOP_BIT		0x1
>  
> +/* REG_UFS_MEM_CFG - Global Config Registers 300h */
> +#define MCQ_MODE_SELECT 	0x1
> +#define ESI_ENABLE		0x2

Use BIT() macros.

- Mani

> +
>  /* CQISy - CQ y Interrupt Status Register  */
>  #define UFSHCD_MCQ_CQIS_TAIL_ENT_PUSH_STS	0x1
>  
> -- 
> 2.29.0
> 

-- 
மணிவண்ணன் சதாசிவம்