[PATCH 1/3] dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue

[Krzysztof Kozlowski]

On 13/12/2023 07:35, Chunfeng Yun wrote:
> For Gen1 isoc-in endpoint on controller before about SSUSB IPM v1.6.0, it
> still send out unexpected ACK after receiving a short packet in burst
> transfer, this will cause an exception on connected device, specially for
> a 4k camera.
> Add a quirk property "mediatek,rxfifo-depth" to work around this hardware
> issue;
> The side-effect is that may cause performance drop about 10%, including
> bulk transfer.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
>  .../devicetree/bindings/usb/mediatek,mtk-xhci.yaml     | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> index e9644e333d78..b8ed68574ba4 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
> @@ -124,6 +124,16 @@ properties:
>        defined in the xHCI spec on MTK's controller.
>      default: 5000
>  
> +  mediatek,rxfifo-depth:
> +    description:

The property description and driver patch suggest you configure the
depth of FIFO, so this should be not bool, but some uint32. And then,
use generic "fifo-depth" property to set desired depth.


Best regards,
Krzysztof