[PATCH v4 09/17] drm/mediatek: Support CSC in OVL

Hsiao Chien Sung shawn.sung at mediatek.com
Tue Dec 12 04:19:49 PST 2023


Support Color Transform Control (CSC) in Overlay to
do Y2R or R2R conversion.

Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 121 +++++++++++++++++++++++-
 1 file changed, 118 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index 66074c2d917c..7e217142d0c4 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -31,6 +31,7 @@
 #define OVL_LAYER_SMI_ID_EN				BIT(0)
 #define OVL_BGCLR_SEL_IN				BIT(2)
 #define OVL_LAYER_AFBC_EN(n)				BIT(4+n)
+#define OVL_OUTPUT_CLAMP				BIT(26)
 #define DISP_REG_OVL_ROI_BGCLR			0x0028
 #define DISP_REG_OVL_SRC_CON			0x002c
 #define DISP_REG_OVL_CON(n)			(0x0030 + 0x20 * (n))
@@ -44,6 +45,23 @@
 #define DISP_REG_OVL_RDMA_GMC(n)		(0x00c8 + 0x20 * (n))
 #define DISP_REG_OVL_ADDR_MT2701		0x0040
 #define DISP_REG_OVL_CLRFMT_EXT			0x02D0
+#define DISP_REG_OVL_CLRFMT_EXT1		0x02D8
+#define OVL_CLRFMT_EXT1_CSC_EN(n)			(1 << (((n) * 4) + 1))
+#define DISP_REG_OVL_Y2R_PARA_R0(n)		(0x0134 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_RMY				(GENMASK(14, 0))
+#define DISP_REG_OVL_Y2R_PARA_G0(n)		(0x013c + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_GMU				(GENMASK(30, 16))
+#define DISP_REG_OVL_Y2R_PARA_B1(n)		(0x0148 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_BMV				(GENMASK(14, 0))
+#define DISP_REG_OVL_Y2R_PARA_YUV_A_0(n)	(0x014c + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_YA				(GENMASK(10, 0))
+#define OVL_Y2R_PARA_C_CF_UA				(GENMASK(26, 16))
+#define DISP_REG_OVL_Y2R_PARA_YUV_A_1(n)	(0x0150 + 0x28 * (n))
+#define OVL_Y2R_PARA_C_CF_VA				(GENMASK(10, 0))
+#define DISP_REG_OVL_Y2R_PRE_ADD2(n)		(0x0154 + 0x28 * (n))
+#define DISP_REG_OVL_R2R_R0(n)			(0x0500 + 0x40 * (n))
+#define DISP_REG_OVL_R2R_G1(n)			(0x0510 + 0x40 * (n))
+#define DISP_REG_OVL_R2R_B2(n)			(0x0520 + 0x40 * (n))
 #define DISP_REG_OVL_ADDR_MT8173		0x0f40
 #define DISP_REG_OVL_ADDR(ovl, n)		((ovl)->data->addr + 0x20 * (n))
 #define DISP_REG_OVL_HDR_ADDR(ovl, n)		((ovl)->data->addr + 0x20 * (n) + 0x04)
@@ -56,6 +74,8 @@
 #define OVL_CON_CLRFMT_MAN		BIT(23)
 #define OVL_CON_BYTE_SWAP		BIT(24)
 #define OVL_CON_RGB_SWAP		BIT(25)
+#define OVL_CON_MTX_AUTO_DIS		BIT(26)
+#define OVL_CON_MTX_EN			BIT(27)
 #define OVL_CON_CLRFMT_RGB		(1 << 12)
 #define OVL_CON_CLRFMT_RGBA8888		(2 << 12)
 #define OVL_CON_CLRFMT_ARGB8888		(3 << 12)
@@ -63,6 +83,7 @@
 #define OVL_CON_CLRFMT_UYVY		(4 << 12)
 #define OVL_CON_CLRFMT_YUYV		(5 << 12)
 #define OVL_CON_MTX_YUV_TO_RGB		(6 << 16)
+#define OVL_CON_MTX_PROGRAMMABLE	(8 << 16)
 #define OVL_CON_CLRFMT_RGB565(ovl)	((ovl)->data->fmt_rgb565_is_0 ? \
 					0 : OVL_CON_CLRFMT_RGB)
 #define OVL_CON_CLRFMT_RGB888(ovl)	((ovl)->data->fmt_rgb565_is_0 ? \
@@ -76,6 +97,22 @@
 #define	OVL_CON_VIRT_FLIP	BIT(9)
 #define	OVL_CON_HORZ_FLIP	BIT(10)
 
+static inline bool is_10bit_rgb(u32 fmt)
+{
+	switch (fmt) {
+	case DRM_FORMAT_XRGB2101010:
+	case DRM_FORMAT_ARGB2101010:
+	case DRM_FORMAT_RGBX1010102:
+	case DRM_FORMAT_RGBA1010102:
+	case DRM_FORMAT_XBGR2101010:
+	case DRM_FORMAT_ABGR2101010:
+	case DRM_FORMAT_BGRX1010102:
+	case DRM_FORMAT_BGRA1010102:
+		return true;
+	}
+	return false;
+}
+
 static const u32 mt8173_formats[] = {
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
@@ -217,6 +254,14 @@ void mtk_ovl_start(struct device *dev)
 	if (ovl->data->smi_id_en)
 		reg |= OVL_LAYER_SMI_ID_EN;
 
+	/*
+	 * When doing Y2R conversion, it's common to get an output
+	 * that is larger than 10 bits (negative numbers).
+	 * Enable this bit to clamp the output to 10 bits per channel
+	 * (should always be enabled)
+	 */
+	reg |= OVL_OUTPUT_CLAMP;
+
 	writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
 	writel_relaxed(0x1, ovl->regs + DISP_REG_OVL_EN);
 }
@@ -256,9 +301,7 @@ static void mtk_ovl_set_bit_depth(struct device *dev, int idx, u32 format,
 	reg = readl(ovl->regs + DISP_REG_OVL_CLRFMT_EXT);
 	reg &= ~OVL_CON_CLRFMT_BIT_DEPTH_MASK(idx);
 
-	if (format == DRM_FORMAT_RGBA1010102 ||
-	    format == DRM_FORMAT_BGRA1010102 ||
-	    format == DRM_FORMAT_ARGB2101010)
+	if (is_10bit_rgb(format))
 		bit_depth = OVL_CON_CLRFMT_10_BIT;
 
 	reg |= OVL_CON_CLRFMT_BIT_DEPTH(bit_depth, idx);
@@ -458,6 +501,78 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
 	    (state->base.fb && !state->base.fb->format->has_alpha))
 		ignore_pixel_alpha = OVL_CONST_BLEND;
 
+	/* need to do Y2R and R2R to reduce 10bit data to 8bit for CRC calculation */
+	if (ovl->data->supports_clrfmt_ext) {
+		u32 y2r_coef = 0, y2r_offset = 0, r2r_coef = 0, csc_en = 0;
+
+		if (is_10bit_rgb(fmt)) {
+			con |= OVL_CON_MTX_AUTO_DIS | OVL_CON_MTX_EN | OVL_CON_MTX_PROGRAMMABLE;
+
+			/*
+			 * Y2R coef setting
+			 * bit 13 is 2^1, bit 12 is 2^0, bit 11 is 2^-1,
+			 * bit 10 is 2^-2 = 0.25
+			 */
+			y2r_coef = BIT(10);
+
+			/* -1 in 10bit */
+			y2r_offset = GENMASK(10, 0) - 1;
+
+			/*
+			 * R2R coef setting
+			 * bit 19 is 2^1, bit 18 is 2^0, bit 17 is 2^-1,
+			 * bit 20 is 2^2 = 4
+			 */
+			r2r_coef = BIT(20);
+
+			/* CSC_EN is for R2R */
+			csc_en = OVL_CLRFMT_EXT1_CSC_EN(idx);
+
+			/*
+			 * 1. YUV input data - 1 and shift right for 2 bits to remove it
+			 * [R']   [0.25    0    0]   [Y in - 1]
+			 * [G'] = [   0 0.25    0] * [U in - 1]
+			 * [B']   [   0    0 0.25]   [V in - 1]
+			 *
+			 * 2. shift left for 2 bit letting the last 2 bits become 0
+			 * [R out]   [ 4  0  0]   [R']
+			 * [G out] = [ 0  4  0] * [G']
+			 * [B out]   [ 0  0  4]   [B']
+			 */
+		}
+
+		mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_R0(idx),
+				   OVL_Y2R_PARA_C_CF_RMY);
+		mtk_ddp_write_mask(cmdq_pkt, (y2r_coef << 16),
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_G0(idx),
+				   OVL_Y2R_PARA_C_CF_GMU);
+		mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_B1(idx),
+				   OVL_Y2R_PARA_C_CF_BMV);
+
+		mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
+				   OVL_Y2R_PARA_C_CF_YA);
+		mtk_ddp_write_mask(cmdq_pkt, (y2r_offset << 16),
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
+				   OVL_Y2R_PARA_C_CF_UA);
+		mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_Y2R_PARA_YUV_A_1(idx),
+				   OVL_Y2R_PARA_C_CF_VA);
+
+		mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+				      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_R0(idx));
+		mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+				      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_G1(idx));
+		mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
+				      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_R2R_B2(idx));
+
+		mtk_ddp_write_mask(cmdq_pkt, csc_en,
+				   &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_CLRFMT_EXT1,
+				   OVL_CLRFMT_EXT1_CSC_EN(idx));
+	}
+
 	if (pending->rotation & DRM_MODE_REFLECT_Y) {
 		con |= OVL_CON_VIRT_FLIP;
 		addr += (pending->height - 1) * pending->pitch;
-- 
2.18.0




More information about the Linux-mediatek mailing list