[PATCH v3 6/9] arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool
Chen-Yu Tsai
wenst at chromium.org
Thu Dec 7 03:23:40 PST 2023
On Thu, Dec 7, 2023 at 2:28 PM Chen-Yu Tsai <wenst at chromium.org> wrote:
>
> On Mon, Dec 4, 2023 at 11:27 PM AngeloGioacchino Del Regno
> <angelogioacchino.delregno at collabora.com> wrote:
> >
> > Il 04/12/23 09:40, Chen-Yu Tsai ha scritto:
> > > Tentacruel and Tentacool are MT8186 based Chromebooks based on the
> > > Krabby design.
> > >
> > > Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
> > > convertible device with touchscreen and stylus.
> > >
> > > Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
> > > device. It does not have a touchscreen or stylus.
> > >
> > > The two devices both have two variants. The difference is a second
> > > source touchpad controller that shares the same address as the original,
> > > but is incompatible.
> > >
> > > The extra SKU IDs for the Tentacruel devices map to different sensor
> > > components attached to the Embedded Controller. These are not visible
> > > to the main processor.
> > >
> > > Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> > > Acked-by: Conor Dooley <conor.dooley at microchip.com>
> > > ---
> > > Changes since v2:
> > > - Picked up Conor's ack
> > > - Rename touchpad to trackpad
> > > - Drop pinctrl properties from trackpad in tentacruel/tentacool second
> > > source trackpad
> > >
> > > Changes since v1:
> > > - Reorder SKU numbers in descending order.
> > > - Fixed pinconfig node names
> > > - Moved pinctrl-* properties after interrupts-*
> > > - Switched to interrupts-extended for external components
> > > - Marked ADSP as explicitly disabled, with a comment explaining that it
> > > stalls the system
> > > - Renamed "touchpad" to "trackpad"
> > > - Dropped bogus "no-laneswap" property from it6505 node
> > > - Moved "realtek,jd-src" property to after all the regulator supplies
> > > - Switched to macros for MT6366 regulator "regulator-allowed-modes"
> > > - Renamed "vgpu" regulator name to allow coupling, with a comment
> > > containing the name used in the design
> > > - Renamed "cr50" node name to "tpm"
> > > - Moved trackpad_pins reference up to i2c2; workaround for second source
> > > component resource sharing.
> > > - Fix copyright year
> > > - Fixed touchscreen supply name
> > >
> > > arch/arm64/boot/dts/mediatek/Makefile | 4 +
> > > .../dts/mediatek/mt8186-corsola-krabby.dtsi | 129 ++
> > > .../mt8186-corsola-tentacool-sku327681.dts | 57 +
> > > .../mt8186-corsola-tentacool-sku327683.dts | 24 +
> > > .../mt8186-corsola-tentacruel-sku262144.dts | 44 +
> > > .../mt8186-corsola-tentacruel-sku262148.dts | 26 +
> > > .../boot/dts/mediatek/mt8186-corsola.dtsi | 1719 +++++++++++++++++
> > > 7 files changed, 2003 insertions(+)
> > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> > >
> > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> > > index e6e7592a3645..442af61b1305 100644
> > > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > > @@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
> > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
> > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
> > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
> > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
> > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> > > new file mode 100644
> > > index 000000000000..9b2b64525961
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> > > @@ -0,0 +1,129 @@
> > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > +/*
> > > + * Copyright 2022 Google LLC
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include "mt8186-corsola.dtsi"
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +
> > > +/ {
> > > + aliases {
> > > + i2c4 = &i2c4;
> > > + };
> > > +};
> > > +
> > > +&dsi_out {
> > > + remote-endpoint = <&ps8640_in>;
> > > +};
> > > +
> > > +&i2c0 {
> > > + clock-frequency = <400000>;
> > > +
> > > + ps8640: edp-bridge at 8 {
> > > + compatible = "parade,ps8640";
> > > + reg = <0x8>;
> > > + powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
> > > + reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&ps8640_pins>;
> > > + vdd12-supply = <&mt6366_vrf12_reg>;
> > > + vdd33-supply = <&mt6366_vcn33_reg>;
> > > +
> > > + ports {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + port at 0 {
> > > + reg = <0>;
> > > +
> > > + ps8640_in: endpoint {
> > > + remote-endpoint = <&dsi_out>;
> > > + };
> > > + };
> > > +
> > > + port at 1 {
> > > + reg = <1>;
> > > +
> > > + ps8640_out: endpoint {
> > > + remote-endpoint = <&panel_in>;
> > > + };
> > > + };
> > > + };
> > > +
> > > + aux-bus {
> > > + panel {
> > > + compatible = "edp-panel";
> > > + power-supply = <&pp3300_disp_x>;
> > > + backlight = <&backlight_lcd0>;
> > > +
> > > + port {
> > > + panel_in: endpoint {
> > > + remote-endpoint = <&ps8640_out>;
> > > + };
> > > + };
> > > + };
> > > + };
> > > + };
> > > +};
> > > +
> > > +&i2c1 {
> > > + i2c-scl-internal-delay-ns = <10000>;
> > > +
> > > + touchscreen: touchscreen at 10 {
> > > + compatible = "hid-over-i2c";
> > > + reg = <0x10>;
> > > + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&touchscreen_pins>;
> > > + post-power-on-delay-ms = <10>;
> > > + hid-descr-addr = <0x0001>;
> > > + vdd-supply = <&pp3300_s3>;
> > > + };
> > > +};
> > > +
> > > +&i2c4 {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&i2c4_pins>;
> > > + clock-frequency = <400000>;
> > > + status = "okay";
> > > +
> > > + proximity at 28 {
> > > + compatible = "semtech,sx9324";
> > > + reg = <0x28>;
> > > + interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&sar_sensor_pins>;
> > > + vdd-supply = <&mt6366_vio18_reg>;
> > > + svdd-supply = <&mt6366_vio18_reg>;
> > > + #io-channel-cells = <1>;
> >
> > From the newest DTS coding style document:
> >
> > The following order of properties in device nodes is preferred:
> >
> > 1. compatible
> > 2. reg
> > 3. ranges
> > 4. Standard/common properties (defined by common bindings, e.g. without
> > vendor-prefixes)
> > 5. Vendor-specific properties
> > 6. status (if applicable)
> > 7. Child nodes, where each node is preceded with a blank line
> >
> > The "status" property is by default "okay", thus it can be omitted.
> >
> > The above-described ordering follows this approach:
> >
> > 1. Most important properties start the node: compatible then bus addressing to
> > match unit address.
> > 2. Each node will have common properties in similar place.
> > 3. Status is the last information to annotate that device node is or is not
> > finished (board resources are needed).
>
> Wishing for a checking tool now. :p
>
> > #io-channel-cells goes after `reg` (same for the other instances) :-)
>
> Ack (though it looks weird).
>
> > > + };
> > > +};
> > > +
> > > +&pio {
> > > + i2c4_pins: i2c4-pins {
> > > + pins-bus {
> > > + pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
> > > + <PINMUX_GPIO135__FUNC_SCL4>;
> > > + bias-disable;
> > > + drive-strength = <4>;
> > > + input-enable;
> > > + };
> > > + };
> > > +
> > > + ps8640_pins: ps8640-pins {
> > > + pins-pwrdn-rst {
> > > + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
> > > + <PINMUX_GPIO98__FUNC_GPIO98>;
> > > + output-low;
> > > + };
> > > + };
> > > +
> > > + sar_sensor_pins: sar-sensor-pins {
> > > + pins-irq {
> > > + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
> > > + input-enable;
> > > + bias-pull-up;
> > > + };
> > > + };
> > > +};
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> > > new file mode 100644
> > > index 000000000000..9bb64353ca65
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> > > @@ -0,0 +1,57 @@
> > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > +/*
> > > + * Copyright 2022 Google LLC
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include "mt8186-corsola-krabby.dtsi"
> > > +
> > > +/ {
> > > + model = "Google Tentacool board";
> > > + compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
> > > + chassis-type = "laptop";
> > > +};
> > > +
> > > +/* Tentacool omits the pen. */
> > > +&gpio_keys {
> > > + status = "disabled";
> > > +};
> > > +
> > > +/* Tentacool omits the touchscreen; nothing else is on i2c1. */
> > > +&i2c1 {
> > > + status = "disabled";
> > > +};
> > > +
> > > +&keyboard_controller {
> > > + function-row-physmap = <
> > > + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
> > > + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
> > > + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
> > > + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
> > > + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
> > > + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
> > > + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
> > > + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
> > > + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
> > > + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
> > > + >;
> > > +
> > > + linux,keymap = <
> > > + MATRIX_KEY(0x00, 0x02, KEY_BACK)
> > > + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> > > + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> > > + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> > > + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
> > > + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
> > > + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
> > > + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> > > + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> > > + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> > > + CROS_STD_MAIN_KEYMAP
> > > + >;
> > > +};
> > > +
> > > +/* Tentacool omits the touchscreen. */
> > > +&touchscreen {
> > > + status = "disabled";
> > > +};
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> > > new file mode 100644
> > > index 000000000000..c3ae6f9616c8
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> > > @@ -0,0 +1,24 @@
> > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > +/*
> > > + * Copyright 2023 Google LLC
> > > + */
> > > +
> > > +#include "mt8186-corsola-tentacool-sku327681.dts"
> > > +
> > > +/ {
> > > + compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
> > > +};
> > > +
> > > +/* This variant replaces only the trackpad controller. */
> > > +&i2c2 {
> > > + /delete-node/ trackpad at 15;
> >
> > Why are you deleting the trackpad at 15 node?
> >
> > You can simply override the compatible, or actually omit the compatible string
> > in the *.dtsi file, and set just that in each board *.dts.
> >
> > dtsi:
> > trackpad_a: trackpad at 15 {
> > /* Compatible is set in each board dts */
> > reg, interrupts, others
> > }
> >
> > dts:
> >
> > &trackpad_a {
> > compatible = "elan,ekth3000";
> > };
>
> The original trackpad at 15 comes from the base design and is used for all
> models other than the ones with the conflicting component. Hence I believe
> it should live in the base .dtsi.
>
> The delete-node makes it much less likely to have any lingering properties.
> These are not nodes that just differ in compatible strings like DSI panels.
> They have incompatible bindings. For example, elan,ekth3000 uses "vcc-supply",
> while "hid-over-i2c" uses "vdd-supply".
>
> And going back to my previous argument, the base design used one specific
> model which is carried over to all the other models.
>
> Suppose I add a phandle to the original trackpad, and do
>
> /delete-node/ &trackpad;
>
> Would that be better?
>
> > other dts:
> >
> > &trackpad_a {
> > compatible = "hid-over-i2c";
> > };
> >
> > > +
> > > + trackpad at 15 {
> > > + compatible = "hid-over-i2c";
> > > + reg = <0x15>;
> > > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> > > + hid-descr-addr = <0x0001>;
> > > + vdd-supply = <&pp3300_s3>;
> > > + wakeup-source;
> > > + };
> > > +};
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> > > new file mode 100644
> > > index 000000000000..26d3451a5e47
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> > > @@ -0,0 +1,44 @@
> > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > +/*
> > > + * Copyright 2022 Google LLC
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include "mt8186-corsola-krabby.dtsi"
> > > +
> > > +/ {
> > > + model = "Google Tentacruel board";
> > > + compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
> > > + "google,tentacruel-sku262145", "google,tentacruel-sku262144",
> > > + "google,tentacruel", "mediatek,mt8186";
> > > + chassis-type = "convertible";
> > > +};
> > > +
> > > +&keyboard_controller {
> > > + function-row-physmap = <
> > > + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
> > > + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
> > > + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
> > > + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
> > > + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
> > > + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
> > > + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
> > > + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
> > > + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
> > > + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
> > > + >;
> > > +
> > > + linux,keymap = <
> > > + MATRIX_KEY(0x00, 0x02, KEY_BACK)
> > > + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> > > + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> > > + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> > > + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
> > > + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
> > > + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
> > > + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> > > + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> > > + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> > > + CROS_STD_MAIN_KEYMAP
> > > + >;
> > > +};
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> > > new file mode 100644
> > > index 000000000000..447b57b12b41
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> > > @@ -0,0 +1,26 @@
> > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > +/*
> > > + * Copyright 2023 Google LLC
> > > + */
> > > +
> > > +#include "mt8186-corsola-tentacruel-sku262144.dts"
> > > +
> > > +/ {
> > > + compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
> > > + "google,tentacruel-sku262149", "google,tentacruel-sku262148",
> > > + "google,tentacruel", "mediatek,mt8186";
> > > +};
> > > +
> > > +/* This variant replaces only the trackpad controller. */
> > > +&i2c2 {
> > > + /delete-node/ trackpad at 15;
> > > +
> > > + trackpad at 15 {
> > > + compatible = "hid-over-i2c";
> > > + reg = <0x15>;
> > > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> > > + hid-descr-addr = <0x0001>;
> > > + vdd-supply = <&pp3300_s3>;
> > > + wakeup-source;
> > > + };
> > > +};
> > > diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> > > new file mode 100644
> > > index 000000000000..8726b2916ef1
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> > > @@ -0,0 +1,1719 @@
> > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > > +/*
> > > + * Copyright (C) 2022 MediaTek Inc.
> > > + */
> > > +/dts-v1/;
> > > +#include "mt8186.dtsi"
> > > +#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +#include <dt-bindings/input/input.h>
> > > +#include <dt-bindings/input/gpio-keys.h>
> > > +#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
> > > +
> > > +/ {
> > > + aliases {
> > > + i2c0 = &i2c0;
> > > + i2c1 = &i2c1;
> > > + i2c2 = &i2c2;
> > > + i2c3 = &i2c3;
> > > + i2c5 = &i2c5;
> > > + mmc0 = &mmc0;
> > > + mmc1 = &mmc1;
> > > + serial0 = &uart0;
> > > + };
> > > +
> > > + chosen {
> > > + stdout-path = "serial0:115200n8";
> > > + };
> > > +
> > > + memory at 40000000 {
> > > + device_type = "memory";
> > > + /* The size should be filled in by the bootloader. */
> > > + reg = <0 0x40000000 0 0>;
> > > + };
> > > +
> > > + backlight_lcd0: backlight-lcd0 {
> > > + compatible = "pwm-backlight";
> > > + pwms = <&pwm0 0 500000>;
> > > + power-supply = <&ppvar_sys>;
> > > + enable-gpios = <&pio 152 0>;
> > > + brightness-levels = <0 1023>;
> > > + num-interpolated-steps = <1023>;
> > > + default-brightness-level = <576>;
> > > + };
> > > +
> > > + btsco: bt-sco {
> >
> > Do you really need the phandle to bt-sco?
>
> No. But the sound node probably should be referencing it and the dmic
> node via DT instead of hardcoding the DAI and codec names in the machine
> driver.
>
> Anyway, will remove the label for now.
>
> > Also, this node describes a codec, so: "bt-sco-codec" please!
>
> Ack.
>
> > > + compatible = "linux,bt-sco";
> > > + #sound-dai-cells = <0>;
> > > + };
> > > +
> > > + dmic_codec: dmic-codec {
> >
> > This phandle is unused...
>
> Removed.
>
> > ..snip..
> >
> > > +
> > > +&adsp {
> > > + memory-region = <&adsp_dma_mem>, <&adsp_mem>;
> > > + status = "disabled"; /* causes stall */
> >
> > This is a firmware issue: once the correct firmware is uploaded to linux-firmware
> > the dsp node can get enabled... so it we make sure that this happens before this
> > devicetree gets picked, we can avoid a second commit enabling audio.
> >
> > After all, since we *want to* use the Xtensa DSP for audio, without it booted
> > sound won't work *anyway*.... so having the firmware in place can also be seen
> > as a direct dependency of the entire audio functionality.
> >
> > P.S.: The FW that is distributed with ChromeOS works just fine!
>
> I'll give that a try.
I have:
sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-5494c
sof-audio-of-mt8186 10680000.adsp: Firmware: ABI 3:22:1 Kernel ABI 3:23:0
sof-audio-of-mt8186 10680000.adsp: unknown sof_ext_man header type 3 size 0x30
sof-audio-of-mt8186 10680000.adsp: Firmware info: version 2:0:0-5494c
and it's still hanging.
And FTR, I think sound is also blocked on the it6505 audio support series.
ChenYu
> > > +};
> > > +
> > > +&afe {
> > > + i2s0-share = "I2S1";
> > > + i2s3-share = "I2S2";
> > > + status = "okay";
> > > +};
> > > +
> >
> > ..snip..
> >
> > > +&i2c2 {
> > > + pinctrl-names = "default";
> > > + /*
> > > + * Trackpad pin put here to work around second source components
> > > + * sharing the pinmux in steelix designs.
> > > + */
> > > + pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
> >
> > There's no choice for now... even if this is not beautiful to see... but it's still
> > ok for me because we can revisit this later when the HW Prober mechanism will be
> > upstreamed.
>
> Yup. Working on that.
>
> > > + clock-frequency = <400000>;
> > > + i2c-scl-internal-delay-ns = <10000>;
> > > + status = "okay";
> > > +
> > > + trackpad at 15 {
> > > + compatible = "elan,ekth3000";
> > > + reg = <0x15>;
> > > + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> > > + vcc-supply = <&pp3300_s3>;
> > > + wakeup-source;
> > > + };
> > > +};
> > > +
> >
> > Thanks,
> > Angelo
>
> Thanks for the review again.
>
> ChenYu
More information about the Linux-mediatek
mailing list