[PATCH] thermal: Fix race condition in suspend/resume
Bo Ye (叶波)
Bo.Ye at mediatek.com
Wed Dec 6 06:32:19 PST 2023
On Thu, 2023-11-16 at 23:06 +0800, Bo Ye wrote:
Hi Reviewers,
Please help review this change, or provide your suggestion. Thanks a
lot
> Hi Rafael sir,
>
> Could you help review this patch, thanks a lot.
>
> Best Regards
> Bo Ye
>
> On Wed, 2023-11-01 at 22:58 +0800, Bo Ye wrote:
> > On Wed, 2023-10-25 at 20:21 +0200, Rafael J. Wysocki wrote:
> > >
> > > External email : Please do not click links or open attachments
> > > until
> > > you have verified the sender or the content.
> > > On Mon, Oct 23, 2023 at 3:20 AM Bo Ye (叶波) <Bo.Ye at mediatek.com>
> > > wrote:
> > > >
> > > > Yes, it is observed issue.
> > >
> > > It does happen, so it's not just "potential" and the subject of
> > > the
> > > patch is slightly misleading. Please adjust it.
> >
> > Done
> >
> > >
> > > > Firstly, it needs to be clarified that this issue occurs in a
> > > > real-
> > > > world environment. By analyzing the logs, we inferred that the
> > >
> > > issue
> > > > occurred just as the system was entering suspend mode, and the
> > > > user
> > >
> > > was
> > > > switching the thermal policy (this action causes all thermal
> > > > zones
> > >
> > > to
> > > > unregister/register). In addition, we conducted degradation
> > > > tests
> > >
> > > and
> > > > also reproduced this issue. The specific method is to first
> > > > switch
> > >
> > > the
> > > > thermal policy through a command, and then immediately put the
> > >
> > > system
> > > > into suspend state through another command. This method can
> > > > also
> > > > reproduce the issue.
> > >
> > > OK, so please add this information to the patch changelog.
> > >
> > > > On Thu, 2023-10-12 at 07:35 +0000, Bo Ye (叶波) wrote:
> > > > > On Sat, 2023-09-16 at 19:33 +0800, Bo Ye wrote:
> > > > >
> > > > > Correct mail title format: remove "Subject:" from mail title.
> > > > >
> > > > > > From: "yugang.wang" <yugang.wang at mediatek.com>
> > > > > >
> > > > > > Body:
> > > > > > This patch fixes a race condition during system resume. It
> > >
> > > occurs
> > > > > > if
> > > > > > the system is exiting a suspend state and a user is trying
> > > > > > to
> > > > > > register/unregister a thermal zone concurrently. The root
> > > > > > cause
> > >
> > > is
> > > > > > that both actions access the `thermal_tz_list`.
> > > > > >
> > > > > > In detail:
> > > > > >
> > > > > > 1. At PM_POST_SUSPEND during the resume, the system reads
> > > > > > all
> > > > > > thermal
> > > > > > zones in `thermal_tz_list`, then resets and updates
> > > > > > their
> > > > > > temperatures.
> > > > > > 2. When registering/unregistering a thermal zone, the
> > > > > > `thermal_tz_list` gets manipulated.
> > > > > >
> > > > > > These two actions might occur concurrently, causing a race
> > > > > > condition.
> > > > > > To solve this issue, we introduce a mutex lock to protect
> > > > > > `thermal_tz_list` from being modified while it's being read
> > > > > > and
> > > > > > updated during the resume from suspend.
> > > > > >
> > > > > > Kernel oops excerpt related to this fix:
> > > > > >
> > > > > > [ 5201.869845] [T316822] pc: [0xffffffeb7d4876f0]
> > > > > > mutex_lock+0x34/0x170
> > > > > > [ 5201.869856] [T316822] lr: [0xffffffeb7ca98a84]
> > > > > > thermal_pm_notify+0xd4/0x26c
> > > > > > [... cut for brevity ...]
> > > > > > [ 5201.871061] [T316822] suspend_prepare+0x150/0x470
> > > > > > [ 5201.871067] [T316822] enter_state+0x84/0x6f4
> > > > > > [ 5201.871076] [T316822] state_store+0x15c/0x1e8
> > >
> > > Well, the connection between the above log snippet and the issue
> > > addressed by the patch is rather hard to establish. Please
> > > include
> > > more of the oops information.
> >
> > Thank you very much for reviewing the additional explanations.
> >
> > 1.Enable thermal policy operation will unregister/register all
> > thermal
> > zones
> > 10-21 06:13:59.280 854 922 I libMtcLoader: enable thermal
> > policy
> > thermal_policy_09.
> >
> > 2.System suspend entry time is 2023-10-20 22:13:59.242
> > [ 4106.364175][T609387] binder:534_2: [name:spm&][SPM] PM: suspend
> > entry 2023-10-20 22:13:59.242898243 UTC
> > [ 4106.366185][T609387] binder:534_2: PM: [name:wakeup&]PM: Pending
> > Wakeup Sources: NETLINK
> >
> > 3. It can be proven that the absence of a switch strategy will
> > perform
> > unregister/register operations on thermal zones (android time is
> > 2023-
> > 10-20 22:13:59.282)，
> > Because the logs for other thermal zones switching are not enabled
> > by
> > default, we cannot see the logs related to other thermal zones.
> > [ 4106.404167][T600922] mtkPowerMsgHdl:
> > [name:thermal_monitor&][Thermal/TZ/CPU]tscpu_unbind unbinding OK
> > [ 4106.404215][T600922] mtkPowerMsgHdl:
> > [name:thermal_monitor&][Thermal/TZ/CPU]tscpu_unbind unbinding OK
> > [ 4106.404225][T600922] mtkPowerMsgHdl:
> > [name:thermal_monitor&][Thermal/TZ/CPU]tscpu_unbind unbinding OK
> > [ 4106.404504][T600922] mtkPowerMsgHdl:
> > [name:thermal_monitor&][Thermal/TZ/CPU]tscpu_bind binding OK, 0
> > [ 4106.404545][T600922] mtkPowerMsgHdl:
> > [name:thermal_monitor&][Thermal/TZ/CPU]tscpu_bind binding OK, 2
> > [ 4106.404566][T600922] mtkPowerMsgHdl:
> > [name:thermal_monitor&][Thermal/TZ/CPU]tscpu_bind binding OK, 1
> >
> > 4. thermal_pm_notify trigger KE(android time: 2023-10-20 22:13:59.
> > 315894)
> > [ 4106.437171][T209387] binder:534_2: [name:mrdump&]Kernel Offset:
> > 0x289cc80000 from 0xffffffc008000000
> > [ 4106.437182][T209387] binder:534_2: [name:mrdump&]PHYS_OFFSET:
> > 0x40000000
> > [ 4106.437191][T209387] binder:534_2: [name:mrdump&]pstate:
> > 80400005
> > (Nzcv daif +PAN -UAO)
> > [ 4106.437204][T209387] binder:534_2: [name:mrdump&]pc :
> > [0xffffffe8a6688200] mutex_lock+0x34/0x184
> > [ 4106.437214][T209387] binder:534_2: [name:mrdump&]lr :
> > [0xffffffe8a5ce66bc] thermal_pm_notify+0xd4/0x26c
> > [ 4106.437220][T209387] binder:534_2: [name:mrdump&]sp :
> > ffffffc01bab3ae0
> > [ 4106.437226][T209387] binder:534_2: [name:mrdump&]x29:
> > ffffffc01bab3af0 x28: 0000000000000001
> >
> > >
> > >
> > > > > > Signed-off-by: yugang.wang <yugang.wang at mediatek.com>
> > > > > > Signed-off-by: Bo Ye <bo.ye at mediatek.com>
> > > > > > ---
> > > > > > drivers/thermal/thermal_core.c | 2 ++
> > > > > > 1 file changed, 2 insertions(+)
> > > > > >
> > > > > > diff --git a/drivers/thermal/thermal_core.c
> > > > > > b/drivers/thermal/thermal_core.c
> > > > > > index 8717a3343512..a7a18ed57b6d 100644
> > > > > > --- a/drivers/thermal/thermal_core.c
> > > > > > +++ b/drivers/thermal/thermal_core.c
> > > > > > @@ -1529,12 +1529,14 @@ static int thermal_pm_notify(struct
> > > > > > notifier_block *nb,
> > > > > > case PM_POST_HIBERNATION:
> > > > > > case PM_POST_RESTORE:
> > > > > > case PM_POST_SUSPEND:
> > > > > > + mutex_lock(&thermal_list_lock);
> > > > > > atomic_set(&in_suspend, 0);
> > >
> > > It is not clear to me why the above statement needs to be under
> > > the
> > > lock.
> > >
> > > > > > list_for_each_entry(tz, &thermal_tz_list, node)
> > > > > > {
> > > > > > thermal_zone_device_init(tz);
> > > > > > thermal_zone_device_update(tz,
> > > >
> > > > THERMAL_EVENT_UN
> > > > SP
> > > > EC
> > > > > > IFIED);
> > > > > > }
> > > > > > + mutex_unlock(&thermal_list_lock);
> > > > > > break;
> > > > > > default:
> > > > > > break;
More information about the Linux-mediatek
mailing list