[PATCH v3 3/4] clk: mediatek: Add pcw_chg_shift control

[Daniel Golle]

From: Sam Shih <sam.shih at mediatek.com>

Introduce pcw_chg_shfit control to optionally use that instead of the
hardcoded PCW_CHG_MASK macro.
This will needed for clocks on the MT7988 SoC.

Signed-off-by: Sam Shih <sam.shih at mediatek.com>
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
v3: use git --from ...
v2: no changes

 drivers/clk/mediatek/clk-pll.c | 5 ++++-
 drivers/clk/mediatek/clk-pll.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 513ab6b1b3229..9f08bc5d2a8a2 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -114,7 +114,10 @@ static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
 			pll->data->pcw_shift);
 	val |= pcw << pll->data->pcw_shift;
 	writel(val, pll->pcw_addr);
-	chg = readl(pll->pcw_chg_addr) | PCW_CHG_MASK;
+	if (pll->data->pcw_chg_shift)
+		chg = readl(pll->pcw_chg_addr) | BIT(pll->data->pcw_chg_shift);
+	else
+		chg = readl(pll->pcw_chg_addr) | PCW_CHG_MASK;
 	writel(chg, pll->pcw_chg_addr);
 	if (pll->tuner_addr)
 		writel(val + 1, pll->tuner_addr);
diff --git a/drivers/clk/mediatek/clk-pll.h b/drivers/clk/mediatek/clk-pll.h
index f17278ff15d78..d28d317e84377 100644
--- a/drivers/clk/mediatek/clk-pll.h
+++ b/drivers/clk/mediatek/clk-pll.h
@@ -44,6 +44,7 @@ struct mtk_pll_data {
 	u32 pcw_reg;
 	int pcw_shift;
 	u32 pcw_chg_reg;
+	int pcw_chg_shift;
 	const struct mtk_pll_div_table *div_table;
 	const char *parent_name;
 	u32 en_reg;
-- 
2.43.0