[PATCH v5 02/10] media: videobuf2: Access vb2_queue bufs array through helper functions
Hans Verkuil
hverkuil-cisco at xs4all.nl
Wed Aug 30 09:36:11 PDT 2023
On 30/08/2023 18:24, Benjamin Gaignard wrote:
>
> Le 30/08/2023 à 15:23, Hans Verkuil a écrit :
>> On 24/08/2023 11:21, Benjamin Gaignard wrote:
>>> The first step before changing how vb2 buffers are stored into queue
>>> is to avoid direct access to bufs arrays.
>>>
>>> This patch adds 2 helpers functions to add and remove vb2 buffers
>>> from a queue. With these 2 and vb2_get_buffer(), bufs field of
>>> struct vb2_queue becomes like a private member of the structure.
>>>
>>> After each call to vb2_get_buffer() we need to be sure that we get
>>> a valid pointer so check the return value of all of them.
>>>
>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
>>>
>>> # Conflicts:
>>> # drivers/media/common/videobuf2/videobuf2-core.c
>>> ---
>>> .../media/common/videobuf2/videobuf2-core.c | 203 ++++++++++++++----
>>> .../media/common/videobuf2/videobuf2-v4l2.c | 28 ++-
>>> drivers/media/platform/amphion/vpu_dbg.c | 22 +-
>>> .../platform/mediatek/jpeg/mtk_jpeg_core.c | 6 +-
>>> .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c | 2 +-
>>> drivers/media/platform/st/sti/hva/hva-v4l2.c | 4 +
>>> drivers/media/test-drivers/visl/visl-dec.c | 28 ++-
>>> .../staging/media/atomisp/pci/atomisp_ioctl.c | 2 +-
>>> 8 files changed, 230 insertions(+), 65 deletions(-)
>>>
>>> diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
>>> index e06905533ef4..8aa13591b782 100644
>>> --- a/drivers/media/common/videobuf2/videobuf2-core.c
>>> +++ b/drivers/media/common/videobuf2/videobuf2-core.c
>>> @@ -403,6 +403,37 @@ static void init_buffer_cache_hints(struct vb2_queue *q, struct vb2_buffer *vb)
>>> vb->skip_cache_sync_on_finish = 1;
>>> }
>>> +/**
>>> + * vb2_queue_add_buffer() - add a buffer to a queue
>>> + * @q: pointer to &struct vb2_queue with videobuf2 queue.
>>> + * @vb: pointer to &struct vb2_buffer to be added to the queue.
>>> + * @index: index where add vb2_buffer in the queue
>>> + */
>>> +static bool vb2_queue_add_buffer(struct vb2_queue *q, struct vb2_buffer *vb, int index)
>>> +{
>>> + if (index < VB2_MAX_FRAME && !q->bufs[index]) {
>>> + q->bufs[index] = vb;
>>> + vb->index = index;
>>> + vb->vb2_queue = q;
>>> + return true;
>>> + }
>>> +
>>> + return false;
>>> +}
>>> +
>>> +/**
>>> + * vb2_queue_remove_buffer() - remove a buffer from a queue
>>> + * @q: pointer to &struct vb2_queue with videobuf2 queue.
>>> + * @vb: pointer to &struct vb2_buffer to be removed from the queue.
>>> + */
>>> +static void vb2_queue_remove_buffer(struct vb2_queue *q, struct vb2_buffer *vb)
>>> +{
>>> + if (vb->index < VB2_MAX_FRAME) {
>>> + q->bufs[vb->index] = NULL;
>>> + vb->vb2_queue = NULL;
>>> + }
>>> +}
>>> +
>>> /*
>>> * __vb2_queue_alloc() - allocate vb2 buffer structures and (for MMAP type)
>>> * video buffer memory for all buffers/planes on the queue and initializes the
>>> @@ -431,9 +462,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
>>> }
>>> vb->state = VB2_BUF_STATE_DEQUEUED;
>>> - vb->vb2_queue = q;
>>> vb->num_planes = num_planes;
>>> - vb->index = q->num_buffers + buffer;
>>> vb->type = q->type;
>>> vb->memory = memory;
>>> init_buffer_cache_hints(q, vb);
>>> @@ -443,7 +472,11 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
>>> }
>>> call_void_bufop(q, init_buffer, vb);
>>> - q->bufs[vb->index] = vb;
>>> + if (!vb2_queue_add_buffer(q, vb, q->num_buffers + buffer)) {
>>> + dprintk(q, 1, "failed adding buffer %d to queue\n", buffer);
>>> + kfree(vb);
>>> + break;
>>> + }
>>> /* Allocate video buffer memory for the MMAP type */
>>> if (memory == VB2_MEMORY_MMAP) {
>>> @@ -451,7 +484,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
>>> if (ret) {
>>> dprintk(q, 1, "failed allocating memory for buffer %d\n",
>>> buffer);
>>> - q->bufs[vb->index] = NULL;
>>> + vb2_queue_remove_buffer(q, vb);
>>> kfree(vb);
>>> break;
>>> }
>>> @@ -466,7 +499,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
>>> dprintk(q, 1, "buffer %d %p initialization failed\n",
>>> buffer, vb);
>>> __vb2_buf_mem_free(vb);
>>> - q->bufs[vb->index] = NULL;
>>> + vb2_queue_remove_buffer(q, vb);
>>> kfree(vb);
>>> break;
>>> }
>>> @@ -489,7 +522,7 @@ static void __vb2_free_mem(struct vb2_queue *q, unsigned int buffers)
>>> for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
>>> ++buffer) {
>>> - vb = q->bufs[buffer];
>>> + vb = vb2_get_buffer(q, buffer);
>>> if (!vb)
>>> continue;
>>> @@ -517,7 +550,7 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers)
>>> /* Call driver-provided cleanup function for each buffer, if provided */
>>> for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
>>> ++buffer) {
>>> - struct vb2_buffer *vb = q->bufs[buffer];
>>> + struct vb2_buffer *vb = vb2_get_buffer(q, buffer);
>>> if (vb && vb->planes[0].mem_priv)
>>> call_void_vb_qop(vb, buf_cleanup, vb);
>>> @@ -557,15 +590,20 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers)
>>> q->cnt_unprepare_streaming = 0;
>>> }
>>> for (buffer = 0; buffer < q->num_buffers; ++buffer) {
>>> - struct vb2_buffer *vb = q->bufs[buffer];
>>> - bool unbalanced = vb->cnt_mem_alloc != vb->cnt_mem_put ||
>>> - vb->cnt_mem_prepare != vb->cnt_mem_finish ||
>>> - vb->cnt_mem_get_userptr != vb->cnt_mem_put_userptr ||
>>> - vb->cnt_mem_attach_dmabuf != vb->cnt_mem_detach_dmabuf ||
>>> - vb->cnt_mem_map_dmabuf != vb->cnt_mem_unmap_dmabuf ||
>>> - vb->cnt_buf_queue != vb->cnt_buf_done ||
>>> - vb->cnt_buf_prepare != vb->cnt_buf_finish ||
>>> - vb->cnt_buf_init != vb->cnt_buf_cleanup;
>>> + struct vb2_buffer *vb = vb2_get_buffer(q, buffer);
>>> + bool unbalanced;
>>> +
>>> + if (!vb)
>>> + continue;
>>> +
>>> + unbalanced = vb->cnt_mem_alloc != vb->cnt_mem_put ||
>>> + vb->cnt_mem_prepare != vb->cnt_mem_finish ||
>>> + vb->cnt_mem_get_userptr != vb->cnt_mem_put_userptr ||
>>> + vb->cnt_mem_attach_dmabuf != vb->cnt_mem_detach_dmabuf ||
>>> + vb->cnt_mem_map_dmabuf != vb->cnt_mem_unmap_dmabuf ||
>>> + vb->cnt_buf_queue != vb->cnt_buf_done ||
>>> + vb->cnt_buf_prepare != vb->cnt_buf_finish ||
>>> + vb->cnt_buf_init != vb->cnt_buf_cleanup;
>>> if (unbalanced || debug) {
>> I think we should drop the '|| debug' part. It is already annoying today to see these
>> messages when the debug parameter is > 0, and now the number of buffers is still
>> fairly small. But if we allow a lot more buffers, then this will really spam the
>> kernel log.
>>
>> I think this should be dropped, and we only report unbalanced buffers.
>>
>> And another optimization is to only report the unbalanced counters. Right now
>> it reports all counters, but it is again too much spamming of the kernel log.
>>
>> I think this change can be done as a separate patch before this patch.
>> That way it can be picked up separately from the other changes in this series.
>>
>>> pr_info(" counters for queue %p, buffer %d:%s\n",
>>> @@ -597,8 +635,13 @@ static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers)
>>> /* Free vb2 buffers */
>>> for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
>>> ++buffer) {
>>> - kfree(q->bufs[buffer]);
>>> - q->bufs[buffer] = NULL;
>>> + struct vb2_buffer *vb = vb2_get_buffer(q, buffer);
>>> +
>>> + if (!vb)
>>> + continue;
>>> +
>>> + vb2_queue_remove_buffer(q, vb);
>>> + kfree(vb);
>>> }
>>> q->num_buffers -= buffers;
>>> @@ -634,7 +677,12 @@ static bool __buffers_in_use(struct vb2_queue *q)
>>> {
>>> unsigned int buffer;
>>> for (buffer = 0; buffer < q->num_buffers; ++buffer) {
>>> - if (vb2_buffer_in_use(q, q->bufs[buffer]))
>>> + struct vb2_buffer *vb = vb2_get_buffer(q, buffer);
>>> +
>>> + if (!vb)
>>> + continue;
>>> +
>>> + if (vb2_buffer_in_use(q, vb))
>>> return true;
>>> }
>>> return false;
>>> @@ -642,7 +690,10 @@ static bool __buffers_in_use(struct vb2_queue *q)
>>> void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb)
>>> {
>>> - call_void_bufop(q, fill_user_buffer, q->bufs[index], pb);
>>> + struct vb2_buffer *vb = vb2_get_buffer(q, index);
>>> +
>>> + if (vb)
>>> + call_void_bufop(q, fill_user_buffer, vb, pb);
>> I think that rather than passing the index (that then has to be verified)
>> it is better to pass the vb2_buffer pointer directly and leave it up to
>> the caller to do the index verification.
>>
>> Another option is to drop this function altogether and let the called
>> call the fill_user_buffer function. Either works for me.
>>
>>> }
>>> EXPORT_SYMBOL_GPL(vb2_core_querybuf);
>>> @@ -1553,7 +1604,13 @@ int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb)
>> Here too it is better to pass the vb2_buffer pointer instead of an index.
>>
>> This function assumes that the index is valid, so the called actually does the
>> validation. Passing the vb pointer instead of the index makes more sense
>> in this new situation.
>>
>> This is also true for two other core functions: vb2_core_qbuf and vb2_core_expbuf.
>>
>>> struct vb2_buffer *vb;
>>> int ret;
>>> - vb = q->bufs[index];
>>> + vb = vb2_get_buffer(q, index);
>>> +
>>> + if (!vb) {
>>> + dprintk(q, 1, "can't find the requested buffer\n");
>>> + return -EINVAL;
>>> + }
>> Changing that avoids having to add this check, so it simplifies the code.
>>
>> I think that this change can be done in a separate patch before this one.
>>
>> It makes sense to apply that regardless of the remainder of this series.
>>
>>> +
>>> if (vb->state != VB2_BUF_STATE_DEQUEUED) {
>>> dprintk(q, 1, "invalid buffer state %s\n",
>>> vb2_state_name(vb->state));
>>> @@ -1624,7 +1681,11 @@ static int vb2_start_streaming(struct vb2_queue *q)
>>> * correctly return them to vb2.
>>> */
>>> for (i = 0; i < q->num_buffers; ++i) {
>>> - vb = q->bufs[i];
>>> + vb = vb2_get_buffer(q, i);
>>> +
>>> + if (!vb)
>>> + continue;
>>> +
>>> if (vb->state == VB2_BUF_STATE_ACTIVE)
>>> vb2_buffer_done(vb, VB2_BUF_STATE_QUEUED);
>>> }
>>> @@ -1652,7 +1713,12 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb,
>>> return -EIO;
>>> }
>>> - vb = q->bufs[index];
>>> + vb = vb2_get_buffer(q, index);
>>> +
>>> + if (!vb) {
>>> + dprintk(q, 1, "can't find the requested buffer\n");
>>> + return -EINVAL;
>>> + }
>>> if (!req && vb->state != VB2_BUF_STATE_IN_REQUEST &&
>>> q->requires_requests) {
>>> @@ -2028,12 +2094,18 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
>>> * to vb2 in stop_streaming().
>>> */
>>> if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
>>> - for (i = 0; i < q->num_buffers; ++i)
>>> - if (q->bufs[i]->state == VB2_BUF_STATE_ACTIVE) {
>>> + for (i = 0; i < q->num_buffers; ++i) {
>>> + struct vb2_buffer *vb = vb2_get_buffer(q, i);
>>> +
>>> + if (!vb)
>>> + continue;
>>> +
>>> + if (vb->state == VB2_BUF_STATE_ACTIVE) {
>>> pr_warn("driver bug: stop_streaming operation is leaving buf %p in active state\n",
>>> - q->bufs[i]);
>>> - vb2_buffer_done(q->bufs[i], VB2_BUF_STATE_ERROR);
>>> + vb);
>>> + vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
>>> }
>>> + }
>>> /* Must be zero now */
>>> WARN_ON(atomic_read(&q->owned_by_drv_count));
>>> }
>>> @@ -2067,9 +2139,14 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
>>> * be changed, so we can't move the buf_finish() to __vb2_dqbuf().
>>> */
>>> for (i = 0; i < q->num_buffers; ++i) {
>>> - struct vb2_buffer *vb = q->bufs[i];
>>> - struct media_request *req = vb->req_obj.req;
>>> + struct vb2_buffer *vb;
>>> + struct media_request *req;
>>> +
>>> + vb = vb2_get_buffer(q, i);
>>> + if (!vb)
>>> + continue;
>>> + req = vb->req_obj.req;
>>> /*
>>> * If a request is associated with this buffer, then
>>> * call buf_request_cancel() to give the driver to complete()
>>> @@ -2219,7 +2296,10 @@ static int __find_plane_by_offset(struct vb2_queue *q, unsigned long off,
>>> buffer = (off >> (PLANE_INDEX_SHIFT + PAGE_SHIFT)) & MAX_BUFFERS;
>>> plane = (off >> PAGE_SHIFT) & PLANE_INDEX_MASK;
>>> - vb = q->bufs[buffer];
>>> + vb = vb2_get_buffer(q, buffer);
>>> + if (!vb)
>>> + return -EINVAL;
>>> +
>>> if (vb->planes[plane].m.offset == off) {
>>> *_buffer = buffer;
>>> *_plane = plane;
>>> @@ -2262,7 +2342,12 @@ int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type,
>>> return -EINVAL;
>>> }
>>> - vb = q->bufs[index];
>>> + vb = vb2_get_buffer(q, index);
>>> +
>>> + if (!vb) {
>>> + dprintk(q, 1, "can't find the requested buffer\n");
>>> + return -EINVAL;
>>> + }
>>> if (plane >= vb->num_planes) {
>>> dprintk(q, 1, "buffer plane out of range\n");
>>> @@ -2339,7 +2424,13 @@ int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma)
>>> if (ret)
>>> goto unlock;
>>> - vb = q->bufs[buffer];
>>> + vb = vb2_get_buffer(q, buffer);
>>> +
>>> + if (!vb) {
>>> + dprintk(q, 1, "can't find the requested buffer\n");
>>> + ret = -EINVAL;
>>> + goto unlock;
>>> + }
>>> /*
>>> * MMAP requires page_aligned buffers.
>>> @@ -2396,7 +2487,12 @@ unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
>>> if (ret)
>>> goto unlock;
>>> - vb = q->bufs[buffer];
>>> + vb = vb2_get_buffer(q, buffer);
>>> + if (!vb) {
>>> + dprintk(q, 1, "can't find the requested buffer\n");
>>> + ret = -EINVAL;
>>> + goto unlock;
>>> + }
>>> vaddr = vb2_plane_vaddr(vb, plane);
>>> mutex_unlock(&q->mmap_lock);
>>> @@ -2625,6 +2721,7 @@ struct vb2_fileio_data {
>>> static int __vb2_init_fileio(struct vb2_queue *q, int read)
>>> {
>>> struct vb2_fileio_data *fileio;
>>> + struct vb2_buffer *vb;
>>> int i, ret;
>>> unsigned int count = 0;
>>> @@ -2679,7 +2776,13 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
>>> * Check if plane_count is correct
>>> * (multiplane buffers are not supported).
>>> */
>>> - if (q->bufs[0]->num_planes != 1) {
>>> + vb = vb2_get_buffer(q, 0);
>>> + if (!vb) {
>>> + ret = -EBUSY;
>>> + goto err_reqbufs;
>>> + }
>> This cannot happen. These fileio helper functions implement the read() support
>> and all the buffer allocation happens here. Userspace can never add or delete
>> buffers later, so there will never be holes. It is safe to assume that
>> vb2_get_buffer(q, i) will always return a valid vb pointer for i in the range
>> of 0 - q->num_buffers-1.
>>
>> Perhaps add a comment to that effect, but otherwise you can drop the checks.
>>
>>> +
>>> + if (vb->num_planes != 1) {
>>> ret = -EBUSY;
>>> goto err_reqbufs;
>>> }
>>> @@ -2688,12 +2791,17 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
>>> * Get kernel address of each buffer.
>>> */
>>> for (i = 0; i < q->num_buffers; i++) {
>>> - fileio->bufs[i].vaddr = vb2_plane_vaddr(q->bufs[i], 0);
>>> + vb = vb2_get_buffer(q, i);
>>> +
>>> + if (!vb)
>>> + continue;
>>> +
>>> + fileio->bufs[i].vaddr = vb2_plane_vaddr(vb, 0);
>>> if (fileio->bufs[i].vaddr == NULL) {
>>> ret = -EINVAL;
>>> goto err_reqbufs;
>>> }
>>> - fileio->bufs[i].size = vb2_plane_size(q->bufs[i], 0);
>>> + fileio->bufs[i].size = vb2_plane_size(vb, 0);
>>> }
>>> /*
>>> @@ -2821,15 +2929,18 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_
>>> fileio->cur_index = index;
>>> buf = &fileio->bufs[index];
>>> - b = q->bufs[index];
>>> + b = vb2_get_buffer(q, index);
>>> +
>>> + if (!b)
>>> + return -EINVAL;
>>> /*
>>> * Get number of bytes filled by the driver
>>> */
>>> buf->pos = 0;
>>> buf->queued = 0;
>>> - buf->size = read ? vb2_get_plane_payload(q->bufs[index], 0)
>>> - : vb2_plane_size(q->bufs[index], 0);
>>> + buf->size = read ? vb2_get_plane_payload(b, 0)
>>> + : vb2_plane_size(b, 0);
>>> /* Compensate for data_offset on read in the multiplanar case. */
>>> if (is_multiplanar && read &&
>>> b->planes[0].data_offset < buf->size) {
>>> @@ -2872,8 +2983,12 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_
>>> * Queue next buffer if required.
>>> */
>>> if (buf->pos == buf->size || (!read && fileio->write_immediately)) {
>>> - struct vb2_buffer *b = q->bufs[index];
>>> + struct vb2_buffer *b = vb2_get_buffer(q, index);
>>> + if (!b) {
>>> + dprintk(q, 1, "can't find the requested buffer\n");
>>> + return -EINVAL;
>>> + }
>>> /*
>>> * Check if this is the last buffer to read.
>>> */
>>> @@ -2899,7 +3014,7 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_
>>> */
>>> buf->pos = 0;
>>> buf->queued = 1;
>>> - buf->size = vb2_plane_size(q->bufs[index], 0);
>>> + buf->size = vb2_plane_size(b, 0);
>>> fileio->q_count += 1;
>>> /*
>>> * If we are queuing up buffers for the first time, then
>>> @@ -2970,7 +3085,9 @@ static int vb2_thread(void *data)
>>> * Call vb2_dqbuf to get buffer back.
>>> */
>>> if (prequeue) {
>>> - vb = q->bufs[index++];
>>> + vb = vb2_get_buffer(q, index++);
>>> + if (!vb)
>>> + continue;
>>> prequeue--;
>>> } else {
>>> call_void_qop(q, wait_finish, q);
>>> @@ -2979,7 +3096,7 @@ static int vb2_thread(void *data)
>>> call_void_qop(q, wait_prepare, q);
>>> dprintk(q, 5, "file io: vb2_dqbuf result: %d\n", ret);
>>> if (!ret)
>>> - vb = q->bufs[index];
>>> + vb = vb2_get_buffer(q, index);
>>> }
>>> if (ret || threadio->stop)
>>> break;
>>> diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c
>>> index c7a54d82a55e..724135d41f7f 100644
>>> --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
>>> +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
>>> @@ -383,8 +383,7 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct media_device *md
>>> return -EINVAL;
>>> }
>>> - if (q->bufs[b->index] == NULL) {
>>> - /* Should never happen */
>>> + if (!vb2_get_buffer(q, b->index)) {
>>> dprintk(q, 1, "%s: buffer is NULL\n", opname);
>> How about:
>>
>> dprintk(q, 1, "%s: buffer %u was deleted\n", opname, b->index);
>>
>> although perhaps that change is more appropriate in patch 09/10?
>>
>> Regardless, once it is possible to delete buffers, then this message should be
>> adjusted accordingly.
>>
>>> return -EINVAL;
>>> }
>>> @@ -394,7 +393,7 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct media_device *md
>>> return -EINVAL;
>>> }
>>> - vb = q->bufs[b->index];
>>> + vb = vb2_get_buffer(q, b->index);
>> This can be moved up to the 'if (!vb2_get_buffer(q, b->index)) {' check above.
>> That avoids calling vb2_get_buffer twice.
>>
>>> vbuf = to_vb2_v4l2_buffer(vb);
>>> ret = __verify_planes_array(vb, b);
>>> if (ret)
>>> @@ -628,11 +627,18 @@ static const struct vb2_buf_ops v4l2_buf_ops = {
>>> struct vb2_buffer *vb2_find_buffer(struct vb2_queue *q, u64 timestamp)
>>> {
>>> unsigned int i;
>>> + struct vb2_buffer *vb2;
>>> - for (i = 0; i < q->num_buffers; i++)
>>> - if (q->bufs[i]->copied_timestamp &&
>>> - q->bufs[i]->timestamp == timestamp)
>>> - return vb2_get_buffer(q, i);
>> Perhaps add a comment here that this loop doesn't scale if there
>> is a really large number of buffers and something more efficient
>> will have to be found in that case.
>>
>>> + for (i = 0; i < q->num_buffers; i++) {
>>> + vb2 = vb2_get_buffer(q, i);
>>> +
>>> + if (!vb2)
>>> + continue;
>>> +
>>> + if (vb2->copied_timestamp &&
>>> + vb2->timestamp == timestamp)
>>> + return vb2;
>>> + }
>>> return NULL;
>>> }
>>> EXPORT_SYMBOL_GPL(vb2_find_buffer);
>>> @@ -664,7 +670,13 @@ int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b)
>>> dprintk(q, 1, "buffer index out of range\n");
>>> return -EINVAL;
>>> }
>>> - vb = q->bufs[b->index];
>>> + vb = vb2_get_buffer(q, b->index);
>>> +
>>> + if (!vb) {
>>> + dprintk(q, 1, "can't find the requested buffer\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> ret = __verify_planes_array(vb, b);
>>> if (!ret)
>>> vb2_core_querybuf(q, b->index, b);
>>> diff --git a/drivers/media/platform/amphion/vpu_dbg.c b/drivers/media/platform/amphion/vpu_dbg.c
>>> index 982c2c777484..a462d6fe4ea9 100644
>>> --- a/drivers/media/platform/amphion/vpu_dbg.c
>>> +++ b/drivers/media/platform/amphion/vpu_dbg.c
>>> @@ -140,11 +140,18 @@ static int vpu_dbg_instance(struct seq_file *s, void *data)
>>> vq = v4l2_m2m_get_src_vq(inst->fh.m2m_ctx);
>>> for (i = 0; i < vq->num_buffers; i++) {
>>> - struct vb2_buffer *vb = vq->bufs[i];
>>> - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>>> + struct vb2_buffer *vb;
>>> + struct vb2_v4l2_buffer *vbuf;
>>> +
>>> + vb = vb2_get_buffer(vq, i);
>>> + if (!vb)
>>> + continue;
>>> if (vb->state == VB2_BUF_STATE_DEQUEUED)
>>> continue;
>>> +
>>> + vbuf = to_vb2_v4l2_buffer(vb);
>>> +
>>> num = scnprintf(str, sizeof(str),
>>> "output [%2d] state = %10s, %8s\n",
>>> i, vb2_stat_name[vb->state],
>>> @@ -155,11 +162,18 @@ static int vpu_dbg_instance(struct seq_file *s, void *data)
>>> vq = v4l2_m2m_get_dst_vq(inst->fh.m2m_ctx);
>>> for (i = 0; i < vq->num_buffers; i++) {
>>> - struct vb2_buffer *vb = vq->bufs[i];
>>> - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>>> + struct vb2_buffer *vb;
>>> + struct vb2_v4l2_buffer *vbuf;
>>> +
>>> + vb = vb2_get_buffer(vq, i);
>>> + if (!vb)
>>> + continue;
>>> if (vb->state == VB2_BUF_STATE_DEQUEUED)
>>> continue;
>>> +
>>> + vbuf = to_vb2_v4l2_buffer(vb);
>>> +
>>> num = scnprintf(str, sizeof(str),
>>> "capture[%2d] state = %10s, %8s\n",
>>> i, vb2_stat_name[vb->state],
>> This can be a separate patch, right? It doesn't depend on any core changes.
>>
>> And this can also be applied before this patch.
>
> Hans, I would like to clarify this comment (and the following Ditto).
> Are you against use vb2_get_buffer() outside core ?
> or testing vb2_get_buffer() result ?
> The goal of this patch was to remove all access like vq->bufs[i] and to make
> sure that vb buffer are always valid.
Sorry for the confusion. I meant that AFAICS each of these driver changes can be
done in the separate patch and that those separate patches can be applied before
this patch. I.e., they are independent.
I always prefer specific driver changes to be done as separate patches rather
than one patch modifying a lot of drivers in one go. That is not always possible,
of course, but in this case I think it is fine, unless I missed something.
Regards,
Hans
>
> Regards,
> Benjamin
>
>>
>>> diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
>>> index 621038aab116..62910a1b8a98 100644
>>> --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
>>> +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
>>> @@ -603,7 +603,11 @@ static int mtk_jpeg_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
>>> return -EINVAL;
>>> }
>>> - vb = vq->bufs[buf->index];
>>> + vb = vb2_get_buffer(vq, buf->index);
>>> + if (!vb) {
>>> + dev_err(ctx->jpeg->dev, "buffer not found\n");
>>> + return -EINVAL;
>>> + }
>>> jpeg_src_buf = mtk_jpeg_vb2_to_srcbuf(vb);
>>> jpeg_src_buf->bs_size = buf->m.planes[0].bytesused;
>>>
>> Ditto.
>>
>>> diff --git a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c
>>> index e393e3e668f8..3d2ae0e1b5b6 100644
>>> --- a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c
>>> +++ b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c
>>> @@ -1696,7 +1696,7 @@ static int vdec_vp9_slice_setup_core_buffer(struct vdec_vp9_slice_instance *inst
>>> /* update internal buffer's width/height */
>>> for (i = 0; i < vq->num_buffers; i++) {
>>> - if (vb == vq->bufs[i]) {
>>> + if (vb == vb2_get_buffer(vq, i)) {
>>> instance->dpb[i].width = w;
>>> instance->dpb[i].height = h;
>>> break;
>> Ditto.
>>
>>> diff --git a/drivers/media/platform/st/sti/hva/hva-v4l2.c b/drivers/media/platform/st/sti/hva/hva-v4l2.c
>>> index 3a848ca32a0e..326be09bdb55 100644
>>> --- a/drivers/media/platform/st/sti/hva/hva-v4l2.c
>>> +++ b/drivers/media/platform/st/sti/hva/hva-v4l2.c
>>> @@ -577,6 +577,10 @@ static int hva_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
>>> }
>>> vb2_buf = vb2_get_buffer(vq, buf->index);
>>> + if (!vb2_buf) {
>>> + dev_dbg(dev, "%s buffer index %d not found\n", ctx->name, buf->index);
>>> + return -EINVAL;
>>> + }
>>> stream = to_hva_stream(to_vb2_v4l2_buffer(vb2_buf));
>>> stream->bytesused = buf->bytesused;
>>> }
>> Ditto.
>>
>>> diff --git a/drivers/media/test-drivers/visl/visl-dec.c b/drivers/media/test-drivers/visl/visl-dec.c
>>> index 318d675e5668..ba20ea998d19 100644
>>> --- a/drivers/media/test-drivers/visl/visl-dec.c
>>> +++ b/drivers/media/test-drivers/visl/visl-dec.c
>>> @@ -290,13 +290,20 @@ static void visl_tpg_fill(struct visl_ctx *ctx, struct visl_run *run)
>>> for (i = 0; i < out_q->num_buffers; i++) {
>>> char entry[] = "index: %u, state: %s, request_fd: %d, ";
>>> u32 old_len = len;
>>> - char *q_status = visl_get_vb2_state(out_q->bufs[i]->state);
>>> + struct vb2_buffer *vb2;
>>> + char *q_status;
>>> +
>>> + vb2 = vb2_get_buffer(out_q, i);
>>> + if (!vb2)
>>> + continue;
>>> +
>>> + q_status = visl_get_vb2_state(vb2->state);
>>> len += scnprintf(&buf[len], TPG_STR_BUF_SZ - len,
>>> entry, i, q_status,
>>> - to_vb2_v4l2_buffer(out_q->bufs[i])->request_fd);
>>> + to_vb2_v4l2_buffer(vb2)->request_fd);
>>> - len += visl_fill_bytesused(to_vb2_v4l2_buffer(out_q->bufs[i]),
>>> + len += visl_fill_bytesused(to_vb2_v4l2_buffer(vb2),
>>> &buf[len],
>>> TPG_STR_BUF_SZ - len);
>>> @@ -342,13 +349,20 @@ static void visl_tpg_fill(struct visl_ctx *ctx, struct visl_run *run)
>>> len = 0;
>>> for (i = 0; i < cap_q->num_buffers; i++) {
>>> u32 old_len = len;
>>> - char *q_status = visl_get_vb2_state(cap_q->bufs[i]->state);
>>> + struct vb2_buffer *vb2;
>>> + char *q_status;
>>> +
>>> + vb2 = vb2_get_buffer(cap_q, i);
>>> + if (!vb2)
>>> + continue;
>>> +
>>> + q_status = visl_get_vb2_state(vb2->state);
>>> len += scnprintf(&buf[len], TPG_STR_BUF_SZ - len,
>>> "index: %u, status: %s, timestamp: %llu, is_held: %d",
>>> - cap_q->bufs[i]->index, q_status,
>>> - cap_q->bufs[i]->timestamp,
>>> - to_vb2_v4l2_buffer(cap_q->bufs[i])->is_held);
>>> + vb2->index, q_status,
>>> + vb2->timestamp,
>>> + to_vb2_v4l2_buffer(vb2)->is_held);
>>> tpg_gen_text(&ctx->tpg, basep, line++ * line_height, 16, &buf[old_len]);
>>> frame_dprintk(ctx->dev, run->dst->sequence, "%s", &buf[old_len]);
>> Ditto.
>>
>>> diff --git a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
>>> index d2174156573a..4b65c69fa60d 100644
>>> --- a/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
>>> +++ b/drivers/staging/media/atomisp/pci/atomisp_ioctl.c
>>> @@ -1061,7 +1061,7 @@ static int atomisp_dqbuf_wrapper(struct file *file, void *fh, struct v4l2_buffer
>>> if (ret)
>>> return ret;
>>> - vb = pipe->vb_queue.bufs[buf->index];
>>> + vb = vb2_get_buffer(&pipe->vb_queue, buf->index);
>>> frame = vb_to_frame(vb);
>>> buf->reserved = asd->frame_status[buf->index];
>> Ditto.
>>
>> Background: I think it is really useful to merge a lot of the groundwork early
>> on, where possible. It simplifies the remainder of the patch series.
>>
>> Regards,
>>
>> Hans
>>
More information about the Linux-mediatek
mailing list