[PATCH -next 2/4] iio: adc: mt6577_auxadc: Use devm_clk_get_enabled() helper function

Ruan Jinjie ruanjinjie at huawei.com
Fri Aug 25 19:37:38 PDT 2023



On 2023/8/25 20:54, Jonathan Cameron wrote:
> On Fri, 25 Aug 2023 18:57:44 +0800
> Jinjie Ruan <ruanjinjie at huawei.com> wrote:
> 
>> The devm_clk_get_enabled() helper:
>>     - calls devm_clk_get()
>>     - calls clk_prepare_enable() and registers what is needed in order to
>>       call clk_disable_unprepare() when needed, as a managed resource.
>>
>> This simplifies the code.
>>
>> Signed-off-by: Jinjie Ruan <ruanjinjie at huawei.com>
> 
> Applied.  This is another case that would benefit from use of dev_err_probe()
> for all error messages in the probe routine.  Should also be easy to convert
> to fully devm managed with one devm_add_action_or_reset() and appropriate
> callback.

Right! Use dev_err_probe() to simplify it is a good idea.

> 
> Jonathan
> 
>> ---
>>  drivers/iio/adc/mt6577_auxadc.c | 17 +++--------------
>>  1 file changed, 3 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c
>> index 0e134777bdd2..ea42fd7a8c99 100644
>> --- a/drivers/iio/adc/mt6577_auxadc.c
>> +++ b/drivers/iio/adc/mt6577_auxadc.c
>> @@ -270,23 +270,16 @@ static int mt6577_auxadc_probe(struct platform_device *pdev)
>>  		return PTR_ERR(adc_dev->reg_base);
>>  	}
>>  
>> -	adc_dev->adc_clk = devm_clk_get(&pdev->dev, "main");
>> +	adc_dev->adc_clk = devm_clk_get_enabled(&pdev->dev, "main");
>>  	if (IS_ERR(adc_dev->adc_clk)) {
>> -		dev_err(&pdev->dev, "failed to get auxadc clock\n");
>> -		return PTR_ERR(adc_dev->adc_clk);
>> -	}
>> -
>> -	ret = clk_prepare_enable(adc_dev->adc_clk);
>> -	if (ret) {
>>  		dev_err(&pdev->dev, "failed to enable auxadc clock\n");
>> -		return ret;
>> +		return PTR_ERR(adc_dev->adc_clk);
>>  	}
>>  
>>  	adc_clk_rate = clk_get_rate(adc_dev->adc_clk);
>>  	if (!adc_clk_rate) {
>> -		ret = -EINVAL;
>>  		dev_err(&pdev->dev, "null clock rate\n");
>> -		goto err_disable_clk;
>> +		return -EINVAL;
>>  	}
>>  
>>  	adc_dev->dev_comp = device_get_match_data(&pdev->dev);
>> @@ -310,8 +303,6 @@ static int mt6577_auxadc_probe(struct platform_device *pdev)
>>  err_power_off:
>>  	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
>>  			      0, MT6577_AUXADC_PDN_EN);
>> -err_disable_clk:
>> -	clk_disable_unprepare(adc_dev->adc_clk);
>>  	return ret;
>>  }
>>  
>> @@ -325,8 +316,6 @@ static int mt6577_auxadc_remove(struct platform_device *pdev)
>>  	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
>>  			      0, MT6577_AUXADC_PDN_EN);
>>  
>> -	clk_disable_unprepare(adc_dev->adc_clk);
>> -
>>  	return 0;
>>  }
>>  
> 



More information about the Linux-mediatek mailing list