[PATCH -next v2 03/12] mtd: rawnand: fsmc: Use helper function devm_clk_get_enabled()

Li Zetao lizetao1 at huawei.com
Fri Aug 18 00:46:33 PDT 2023


Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enable (and possibly
prepare) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clock explicitly. The
label "disable_clk" no longer makes sense, rename it to "disable_fsmc".

Reviewed-by: Miquel Raynal <miquel.raynal at bootlin.com>
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
v1 -> v2: Modify commit message and rename the label "disable_clk" to "disable_fsmc"
v1: https://lore.kernel.org/all/20230817024509.3951629-4-lizetao1@huawei.com/

 drivers/mtd/nand/raw/fsmc_nand.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 7b4742420dfc..7d587284c9a5 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -1066,16 +1066,12 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 	host->regs_va = base + FSMC_NOR_REG_SIZE +
 		(host->bank * FSMC_NAND_BANK_SZ);
 
-	host->clk = devm_clk_get(&pdev->dev, NULL);
+	host->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		dev_err(&pdev->dev, "failed to fetch block clock\n");
 		return PTR_ERR(host->clk);
 	}
 
-	ret = clk_prepare_enable(host->clk);
-	if (ret)
-		return ret;
-
 	/*
 	 * This device ID is actually a common AMBA ID as used on the
 	 * AMBA PrimeCell bus. However it is not a PrimeCell.
@@ -1111,7 +1107,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 		if (!host->read_dma_chan) {
 			dev_err(&pdev->dev, "Unable to get read dma channel\n");
 			ret = -ENODEV;
-			goto disable_clk;
+			goto disable_fsmc;
 		}
 		host->write_dma_chan = dma_request_channel(mask, filter, NULL);
 		if (!host->write_dma_chan) {
@@ -1155,9 +1151,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 release_dma_read_chan:
 	if (host->mode == USE_DMA_ACCESS)
 		dma_release_channel(host->read_dma_chan);
-disable_clk:
+disable_fsmc:
 	fsmc_nand_disable(host);
-	clk_disable_unprepare(host->clk);
 
 	return ret;
 }
@@ -1182,7 +1177,6 @@ static void fsmc_nand_remove(struct platform_device *pdev)
 			dma_release_channel(host->write_dma_chan);
 			dma_release_channel(host->read_dma_chan);
 		}
-		clk_disable_unprepare(host->clk);
 	}
 }
 
-- 
2.34.1




More information about the Linux-mediatek mailing list