[PATCH -next 08/11] mtd: rawnand: stm32_fmc2: Use helper function devm_clk_get_enabled()

[Li Zetao]

After the commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), it can replace the pair of functions,
devm_clk_get() and clk_prepare_enable() with a single helper function
devm_clk_get_enabled(). Moreover, the driver will keeps a clock prepared
(or enabled) during the whole lifetime of the driver, it is unnecessary to
unprepare and disable clock explicitly when remove driver or in the error
handling path.

Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
 drivers/mtd/nand/raw/stm32_fmc2_nand.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 2f9e43f64dd7..88811139aaf5 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1951,21 +1951,17 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
 
 	init_completion(&nfc->complete);
 
-	nfc->clk = devm_clk_get(nfc->cdev, NULL);
-	if (IS_ERR(nfc->clk))
+	nfc->clk = devm_clk_get_enabled(nfc->cdev, NULL);
+	if (IS_ERR(nfc->clk)) {
+		dev_err(dev, "can not get and enable the clock\n");
 		return PTR_ERR(nfc->clk);
-
-	ret = clk_prepare_enable(nfc->clk);
-	if (ret) {
-		dev_err(dev, "can not enable the clock\n");
-		return ret;
 	}
 
 	rstc = devm_reset_control_get(dev, NULL);
 	if (IS_ERR(rstc)) {
 		ret = PTR_ERR(rstc);
 		if (ret == -EPROBE_DEFER)
-			goto err_clk_disable;
+			return ret;
 	} else {
 		reset_control_assert(rstc);
 		reset_control_deassert(rstc);
@@ -2018,9 +2014,6 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
 	sg_free_table(&nfc->dma_data_sg);
 	sg_free_table(&nfc->dma_ecc_sg);
 
-err_clk_disable:
-	clk_disable_unprepare(nfc->clk);
-
 	return ret;
 }
 
@@ -2045,8 +2038,6 @@ static void stm32_fmc2_nfc_remove(struct platform_device *pdev)
 	sg_free_table(&nfc->dma_data_sg);
 	sg_free_table(&nfc->dma_ecc_sg);
 
-	clk_disable_unprepare(nfc->clk);
-
 	stm32_fmc2_nfc_wp_enable(nand);
 }
 
-- 
2.34.1