[PATCH 2/4] dt-bindings: net: dsa: document internal MDIO bus

Vladimir Oltean olteanv at gmail.com
Sun Aug 13 04:53:06 PDT 2023


On Sat, Aug 12, 2023 at 10:20:43PM +0300, Arınç ÜNAL wrote:
> diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> index 4d5f5cc6d031e2..82dda8fae8b16e 100644
> --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> @@ -72,6 +72,10 @@ properties:
>            - compatible
>            - reg
> +  mdio:
> +    $ref: dsa.yaml#/properties/mdio
> +    unevaluatedProperties: false

sja1105 does not support an "mdio" child property. I haven't checked the
others. Don't add properties that aren't supported.

> +
>  patternProperties:
>    "^(ethernet-)?ports$":
>      patternProperties:
> 
> The nxp,sja1105.yaml schema also needed some changes.
> 
> dt-bindings: net: dsa: nxp,sja1105: improve internal MDIO bus bindings
> 
> SJA1110 Ethernet Switch uses the mdios property for its internal MDIO bus.
> Therefore, disallow the mdios property for SJA1105, and the mdio property
> for SJA1110.
> 
> Require the phy-handle property on the non-CPU ports if the mdios property
> is being used.
> 
> Refer to dsa.yaml#/properties/mdio to point the human readers to the
> description on the dsa.yaml schema.
> 
> ---
>  .../bindings/net/dsa/nxp,sja1105.yaml         | 20 ++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> index 82dda8fae8b16e..7d92350f1065b2 100644
> --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
> @@ -52,7 +52,7 @@ properties:
>      patternProperties:
>        "^mdio@[0-1]$":
> -        $ref: /schemas/net/mdio.yaml#
> +        $ref: dsa.yaml#/properties/mdio
>          unevaluatedProperties: false
>          properties:
> @@ -128,14 +128,32 @@ allOf:
>      then:
>        properties:
>          spi-cpol: false
> +        mdios: false
> +
>        required:
>          - spi-cpha
>      else:
>        properties:
>          spi-cpha: false
> +        mdio: false
> +
>        required:
>          - spi-cpol
> +  - if:
> +      required: [ mdios ]
> +    then:
> +      patternProperties:
> +        "^(ethernet-)?ports$":
> +          patternProperties:
> +            "^(ethernet-)?port@[0-9]+$":
> +              if:
> +                not:
> +                  required: [ ethernet ]
> +              then:
> +                required:
> +                  - phy-handle

For sja1105, phylink-compatible bindings (phy-handle, fixed-link or managed)
are required for all ports (user, dsa or cpu).

Also, sja1105 does not populate the slave_mii_bus, so it never uses the
fallback where ports implicitly connect to an internal PHY if no phylink
bindings are present.

> +
>  unevaluatedProperties: false
>  examples:
> 
> Arınç



More information about the Linux-mediatek mailing list